drivers/scsi/aacraid/aacraid.h

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  *      Adaptec AAC series RAID controller driver
   4  *      (c) Copyright 2001 Red Hat Inc. <[email protected]>
   5  *
   6  * based on the old aacraid driver that is..
   7  * Adaptec aacraid device driver for Linux.
   8  *
   9  * Copyright (c) 2000-2010 Adaptec, Inc.
  10  *               2010-2015 PMC-Sierra, Inc. ([email protected])
  11  *               2016-2017 Microsemi Corp. ([email protected])
  12  *
  13  * Module Name:
  14  *  aacraid.h
  15  *
  16  * Abstract: Contains all routines for control of the aacraid driver
  17  */
  18
  19 #ifndef _AACRAID_H_
  20 #define _AACRAID_H_
  21 #ifndef dprintk
  22 # define dprintk(x)
  23 #endif
  24 /* eg: if (nblank(dprintk(x))) */
  25 #define _nblank(x) #x
  26 #define nblank(x) _nblank(x)[0]
  27
  28 #include <linux/interrupt.h>
  29 #include <linux/completion.h>
  30 #include <linux/pci.h>
  31 #include <scsi/scsi_host.h>
  32 #include <scsi/scsi_cmnd.h>
  33
  34 /*------------------------------------------------------------------------------
  35  *              D E F I N E S
  36  *----------------------------------------------------------------------------*/
  37
  38 #define AAC_MAX_MSIX            32      /* vectors */
  39 #define AAC_PCI_MSI_ENABLE      0x8000
  40
  41 enum {
  42         AAC_ENABLE_INTERRUPT    = 0x0,
  43         AAC_DISABLE_INTERRUPT,
  44         AAC_ENABLE_MSIX,
  45         AAC_DISABLE_MSIX,
  46         AAC_CLEAR_AIF_BIT,
  47         AAC_CLEAR_SYNC_BIT,
  48         AAC_ENABLE_INTX
  49 };
  50
  51 #define AAC_INT_MODE_INTX               (1<<0)
  52 #define AAC_INT_MODE_MSI                (1<<1)
  53 #define AAC_INT_MODE_AIF                (1<<2)
  54 #define AAC_INT_MODE_SYNC               (1<<3)
  55 #define AAC_INT_MODE_MSIX               (1<<16)
  56
  57 #define AAC_INT_ENABLE_TYPE1_INTX       0xfffffffb
  58 #define AAC_INT_ENABLE_TYPE1_MSIX       0xfffffffa
  59 #define AAC_INT_DISABLE_ALL             0xffffffff
  60
  61 /* Bit definitions in IOA->Host Interrupt Register */
  62 #define PMC_TRANSITION_TO_OPERATIONAL   (1<<31)
  63 #define PMC_IOARCB_TRANSFER_FAILED      (1<<28)
  64 #define PMC_IOA_UNIT_CHECK              (1<<27)
  65 #define PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE (1<<26)
  66 #define PMC_CRITICAL_IOA_OP_IN_PROGRESS (1<<25)
  67 #define PMC_IOARRIN_LOST                (1<<4)
  68 #define PMC_SYSTEM_BUS_MMIO_ERROR       (1<<3)
  69 #define PMC_IOA_PROCESSOR_IN_ERROR_STATE (1<<2)
  70 #define PMC_HOST_RRQ_VALID              (1<<1)
  71 #define PMC_OPERATIONAL_STATUS          (1<<31)
  72 #define PMC_ALLOW_MSIX_VECTOR0          (1<<0)
  73
  74 #define PMC_IOA_ERROR_INTERRUPTS        (PMC_IOARCB_TRANSFER_FAILED | \
  75                                          PMC_IOA_UNIT_CHECK | \
  76                                          PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE | \
  77                                          PMC_IOARRIN_LOST | \
  78                                          PMC_SYSTEM_BUS_MMIO_ERROR | \
  79                                          PMC_IOA_PROCESSOR_IN_ERROR_STATE)
  80
  81 #define PMC_ALL_INTERRUPT_BITS          (PMC_IOA_ERROR_INTERRUPTS | \
  82                                          PMC_HOST_RRQ_VALID | \
  83                                          PMC_TRANSITION_TO_OPERATIONAL | \
  84                                          PMC_ALLOW_MSIX_VECTOR0)
  85 #define PMC_GLOBAL_INT_BIT2             0x00000004
  86 #define PMC_GLOBAL_INT_BIT0             0x00000001
  87
  88 #ifndef AAC_DRIVER_BUILD
  89 # define AAC_DRIVER_BUILD 50983
  90 # define AAC_DRIVER_BRANCH "-custom"
  91 #endif
  92 #define MAXIMUM_NUM_CONTAINERS  32
  93
  94 #define AAC_NUM_MGT_FIB         8
  95 #define AAC_NUM_IO_FIB          (1024 - AAC_NUM_MGT_FIB)
  96 #define AAC_NUM_FIB             (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB)
  97
  98 #define AAC_MAX_LUN             256
  99
 100 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
 101 #define AAC_MAX_32BIT_SGBCOUNT  ((unsigned short)256)
 102
 103 #define AAC_DEBUG_INSTRUMENT_AIF_DELETE
 104
 105 #define AAC_MAX_NATIVE_TARGETS          1024
 106 /* Thor: 5 phys. buses: #0: empty, 1-4: 256 targets each */
 107 #define AAC_MAX_BUSES                   5
 108 #define AAC_MAX_TARGETS         256
 109 #define AAC_BUS_TARGET_LOOP             (AAC_MAX_BUSES * AAC_MAX_TARGETS)
 110 #define AAC_MAX_NATIVE_SIZE             2048
 111 #define FW_ERROR_BUFFER_SIZE            512
 112 #define AAC_SA_TIMEOUT                  180
 113 #define AAC_ARC_TIMEOUT                 60
 114
 115 #define get_bus_number(x)       (x/AAC_MAX_TARGETS)
 116 #define get_target_number(x)    (x%AAC_MAX_TARGETS)
 117
 118 /* Thor AIF events */
 119 #define SA_AIF_HOTPLUG                  (1<<1)
 120 #define SA_AIF_HARDWARE         (1<<2)
 121 #define SA_AIF_PDEV_CHANGE              (1<<4)
 122 #define SA_AIF_LDEV_CHANGE              (1<<5)
 123 #define SA_AIF_BPSTAT_CHANGE            (1<<30)
 124 #define SA_AIF_BPCFG_CHANGE             (1U<<31)
 125
 126 #define HBA_MAX_SG_EMBEDDED             28
 127 #define HBA_MAX_SG_SEPARATE             90
 128 #define HBA_SENSE_DATA_LEN_MAX          32
 129 #define HBA_REQUEST_TAG_ERROR_FLAG      0x00000002
 130 #define HBA_SGL_FLAGS_EXT               0x80000000UL
 131
 132 struct aac_hba_sgl {
 133         u32             addr_lo; /* Lower 32-bits of SGL element address */
 134         u32             addr_hi; /* Upper 32-bits of SGL element address */
 135         u32             len;    /* Length of SGL element in bytes */
 136         u32             flags;  /* SGL element flags */
 137 };
 138
 139 enum {
 140         HBA_IU_TYPE_SCSI_CMD_REQ                = 0x40,
 141         HBA_IU_TYPE_SCSI_TM_REQ                 = 0x41,
 142         HBA_IU_TYPE_SATA_REQ                    = 0x42,
 143         HBA_IU_TYPE_RESP                        = 0x60,
 144         HBA_IU_TYPE_COALESCED_RESP              = 0x61,
 145         HBA_IU_TYPE_INT_COALESCING_CFG_REQ      = 0x70
 146 };
 147
 148 enum {
 149         HBA_CMD_BYTE1_DATA_DIR_IN               = 0x1,
 150         HBA_CMD_BYTE1_DATA_DIR_OUT              = 0x2,
 151         HBA_CMD_BYTE1_DATA_TYPE_DDR             = 0x4,
 152         HBA_CMD_BYTE1_CRYPTO_ENABLE             = 0x8
 153 };
 154
 155 enum {
 156         HBA_CMD_BYTE1_BITOFF_DATA_DIR_IN        = 0x0,
 157         HBA_CMD_BYTE1_BITOFF_DATA_DIR_OUT,
 158         HBA_CMD_BYTE1_BITOFF_DATA_TYPE_DDR,
 159         HBA_CMD_BYTE1_BITOFF_CRYPTO_ENABLE
 160 };
 161
 162 enum {
 163         HBA_RESP_DATAPRES_NO_DATA               = 0x0,
 164         HBA_RESP_DATAPRES_RESPONSE_DATA,
 165         HBA_RESP_DATAPRES_SENSE_DATA
 166 };
 167
 168 enum {
 169         HBA_RESP_SVCRES_TASK_COMPLETE           = 0x0,
 170         HBA_RESP_SVCRES_FAILURE,
 171         HBA_RESP_SVCRES_TMF_COMPLETE,
 172         HBA_RESP_SVCRES_TMF_SUCCEEDED,
 173         HBA_RESP_SVCRES_TMF_REJECTED,
 174         HBA_RESP_SVCRES_TMF_LUN_INVALID
 175 };
 176
 177 enum {
 178         HBA_RESP_STAT_IO_ERROR                  = 0x1,
 179         HBA_RESP_STAT_IO_ABORTED,
 180         HBA_RESP_STAT_NO_PATH_TO_DEVICE,
 181         HBA_RESP_STAT_INVALID_DEVICE,
 182         HBA_RESP_STAT_HBAMODE_DISABLED          = 0xE,
 183         HBA_RESP_STAT_UNDERRUN                  = 0x51,
 184         HBA_RESP_STAT_OVERRUN                   = 0x75
 185 };
 186
 187 struct aac_hba_cmd_req {
 188         u8      iu_type;        /* HBA information unit type */
 189         /*
 190          * byte1:
 191          * [1:0] DIR - 0=No data, 0x1 = IN, 0x2 = OUT
 192          * [2]   TYPE - 0=PCI, 1=DDR
 193          * [3]   CRYPTO_ENABLE - 0=Crypto disabled, 1=Crypto enabled
 194          */
 195         u8      byte1;
 196         u8      reply_qid;      /* Host reply queue to post response to */
 197         u8      reserved1;
 198         __le32  it_nexus;       /* Device handle for the request */
 199         __le32  request_id;     /* Sender context */
 200         /* Lower 32-bits of tweak value for crypto enabled IOs */
 201         __le32  tweak_value_lo;
 202         u8      cdb[16];        /* SCSI CDB of the command */
 203         u8      lun[8];         /* SCSI LUN of the command */
 204
 205         /* Total data length in bytes to be read/written (if any) */
 206         __le32  data_length;
 207
 208         /* [2:0] Task Attribute, [6:3] Command Priority */
 209         u8      attr_prio;
 210
 211         /* Number of SGL elements embedded in the HBA req */
 212         u8      emb_data_desc_count;
 213
 214         __le16  dek_index;      /* DEK index for crypto enabled IOs */
 215
 216         /* Lower 32-bits of reserved error data target location on the host */
 217         __le32  error_ptr_lo;
 218
 219         /* Upper 32-bits of reserved error data target location on the host */
 220         __le32  error_ptr_hi;
 221
 222         /* Length of reserved error data area on the host in bytes */
 223         __le32  error_length;
 224
 225         /* Upper 32-bits of tweak value for crypto enabled IOs */
 226         __le32  tweak_value_hi;
 227
 228         struct aac_hba_sgl sge[HBA_MAX_SG_SEPARATE+2]; /* SG list space */
 229
 230         /*
 231          * structure must not exceed
 232          * AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE
 233          */
 234 };
 235
 236 /* Task Management Functions (TMF) */
 237 #define HBA_TMF_ABORT_TASK      0x01
 238 #define HBA_TMF_LUN_RESET       0x08
 239
 240 struct aac_hba_tm_req {
 241         u8      iu_type;        /* HBA information unit type */
 242         u8      reply_qid;      /* Host reply queue to post response to */
 243         u8      tmf;            /* Task management function */
 244         u8      reserved1;
 245
 246         __le32  it_nexus;       /* Device handle for the command */
 247
 248         u8      lun[8];         /* SCSI LUN */
 249
 250         /* Used to hold sender context. */
 251         __le32  request_id;     /* Sender context */
 252         __le32  reserved2;
 253
 254         /* Request identifier of managed task */
 255         __le32  managed_request_id;     /* Sender context being managed */
 256         __le32  reserved3;
 257
 258         /* Lower 32-bits of reserved error data target location on the host */
 259         __le32  error_ptr_lo;
 260         /* Upper 32-bits of reserved error data target location on the host */
 261         __le32  error_ptr_hi;
 262         /* Length of reserved error data area on the host in bytes */
 263         __le32  error_length;
 264 };
 265
 266 struct aac_hba_reset_req {
 267         u8      iu_type;        /* HBA information unit type */
 268         /* 0 - reset specified device, 1 - reset all devices */
 269         u8      reset_type;
 270         u8      reply_qid;      /* Host reply queue to post response to */
 271         u8      reserved1;
 272
 273         __le32  it_nexus;       /* Device handle for the command */
 274         __le32  request_id;     /* Sender context */
 275         /* Lower 32-bits of reserved error data target location on the host */
 276         __le32  error_ptr_lo;
 277         /* Upper 32-bits of reserved error data target location on the host */
 278         __le32  error_ptr_hi;
 279         /* Length of reserved error data area on the host in bytes */
 280         __le32  error_length;
 281 };
 282
 283 struct aac_hba_resp {
 284         u8      iu_type;                /* HBA information unit type */
 285         u8      reserved1[3];
 286         __le32  request_identifier;     /* sender context */
 287         __le32  reserved2;
 288         u8      service_response;       /* SCSI service response */
 289         u8      status;                 /* SCSI status */
 290         u8      datapres;       /* [1:0] - data present, [7:2] - reserved */
 291         u8      sense_response_data_len;        /* Sense/response data length */
 292         __le32  residual_count;         /* Residual data length in bytes */
 293         /* Sense/response data */
 294         u8      sense_response_buf[HBA_SENSE_DATA_LEN_MAX];
 295 };
 296
 297 struct aac_native_hba {
 298         union {
 299                 struct aac_hba_cmd_req cmd;
 300                 struct aac_hba_tm_req tmr;
 301                 u8 cmd_bytes[AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE];
 302         } cmd;
 303         union {
 304                 struct aac_hba_resp err;
 305                 u8 resp_bytes[FW_ERROR_BUFFER_SIZE];
 306         } resp;
 307 };
 308
 309 #define CISS_REPORT_PHYSICAL_LUNS       0xc3
 310 #define WRITE_HOST_WELLNESS             0xa5
 311 #define CISS_IDENTIFY_PHYSICAL_DEVICE   0x15
 312 #define BMIC_IN                 0x26
 313 #define BMIC_OUT                        0x27
 314
 315 struct aac_ciss_phys_luns_resp {
 316         u8      list_length[4];         /* LUN list length (N-7, big endian) */
 317         u8      resp_flag;              /* extended response_flag */
 318         u8      reserved[3];
 319         struct _ciss_lun {
 320                 u8      tid[3];         /* Target ID */
 321                 u8      bus;            /* Bus, flag (bits 6,7) */
 322                 u8      level3[2];
 323                 u8      level2[2];
 324                 u8      node_ident[16]; /* phys. node identifier */
 325         } lun[];                        /* List of phys. devices */
 326 };
 327
 328 /*
 329  * Interrupts
 330  */
 331 #define AAC_MAX_HRRQ            64
 332
 333 struct aac_ciss_identify_pd {
 334         u8 scsi_bus;                    /* SCSI Bus number on controller */
 335         u8 scsi_id;                     /* SCSI ID on this bus */
 336         u16 block_size;                 /* sector size in bytes */
 337         u32 total_blocks;               /* number for sectors on drive */
 338         u32 reserved_blocks;            /* controller reserved (RIS) */
 339         u8 model[40];                   /* Physical Drive Model */
 340         u8 serial_number[40];           /* Drive Serial Number */
 341         u8 firmware_revision[8];        /* drive firmware revision */
 342         u8 scsi_inquiry_bits;           /* inquiry byte 7 bits */
 343         u8 compaq_drive_stamp;          /* 0 means drive not stamped */
 344         u8 last_failure_reason;
 345
 346         u8  flags;
 347         u8  more_flags;
 348         u8  scsi_lun;                   /* SCSI LUN for phys drive */
 349         u8  yet_more_flags;
 350         u8  even_more_flags;
 351         u32 spi_speed_rules;            /* SPI Speed :Ultra disable diagnose */
 352         u8  phys_connector[2];          /* connector number on controller */
 353         u8  phys_box_on_bus;            /* phys enclosure this drive resides */
 354         u8  phys_bay_in_box;            /* phys drv bay this drive resides */
 355         u32 rpm;                        /* Drive rotational speed in rpm */
 356         u8  device_type;                /* type of drive */
 357         u8  sata_version;               /* only valid when drive_type is SATA */
 358         u64 big_total_block_count;
 359         u64 ris_starting_lba;
 360         u32 ris_size;
 361         u8  wwid[20];
 362         u8  controller_phy_map[32];
 363         u16 phy_count;
 364         u8  phy_connected_dev_type[256];
 365         u8  phy_to_drive_bay_num[256];
 366         u16 phy_to_attached_dev_index[256];
 367         u8  box_index;
 368         u8  spitfire_support;
 369         u16 extra_physical_drive_flags;
 370         u8  negotiated_link_rate[256];
 371         u8  phy_to_phy_map[256];
 372         u8  redundant_path_present_map;
 373         u8  redundant_path_failure_map;
 374         u8  active_path_number;
 375         u16 alternate_paths_phys_connector[8];
 376         u8  alternate_paths_phys_box_on_port[8];
 377         u8  multi_lun_device_lun_count;
 378         u8  minimum_good_fw_revision[8];
 379         u8  unique_inquiry_bytes[20];
 380         u8  current_temperature_degreesC;
 381         u8  temperature_threshold_degreesC;
 382         u8  max_temperature_degreesC;
 383         u8  logical_blocks_per_phys_block_exp;  /* phyblocksize = 512 * 2^exp */
 384         u16 current_queue_depth_limit;
 385         u8  switch_name[10];
 386         u16 switch_port;
 387         u8  alternate_paths_switch_name[40];
 388         u8  alternate_paths_switch_port[8];
 389         u16 power_on_hours;             /* valid only if gas gauge supported */
 390         u16 percent_endurance_used;     /* valid only if gas gauge supported. */
 391         u8  drive_authentication;
 392         u8  smart_carrier_authentication;
 393         u8  smart_carrier_app_fw_version;
 394         u8  smart_carrier_bootloader_fw_version;
 395         u8  SanitizeSecureEraseSupport;
 396         u8  DriveKeyFlags;
 397         u8  encryption_key_name[64];
 398         u32 misc_drive_flags;
 399         u16 dek_index;
 400         u16 drive_encryption_flags;
 401         u8  sanitize_maximum_time[6];
 402         u8  connector_info_mode;
 403         u8  connector_info_number[4];
 404         u8  long_connector_name[64];
 405         u8  device_unique_identifier[16];
 406         u8  padto_2K[17];
 407 } __packed;
 408
 409 /*
 410  * These macros convert from physical channels to virtual channels
 411  */
 412 #define CONTAINER_CHANNEL               (0)
 413 #define NATIVE_CHANNEL                  (1)
 414 #define CONTAINER_TO_CHANNEL(cont)      (CONTAINER_CHANNEL)
 415 #define CONTAINER_TO_ID(cont)           (cont)
 416 #define CONTAINER_TO_LUN(cont)          (0)
 417 #define ENCLOSURE_CHANNEL               (3)
 418
 419 #define PMC_DEVICE_S6   0x28b
 420 #define PMC_DEVICE_S7   0x28c
 421 #define PMC_DEVICE_S8   0x28d
 422
 423 #define aac_phys_to_logical(x)  ((x)+1)
 424 #define aac_logical_to_phys(x)  ((x)?(x)-1:0)
 425
 426 /*
 427  * These macros are for keeping track of
 428  * character device state.
 429  */
 430 #define AAC_CHARDEV_UNREGISTERED        (-1)
 431 #define AAC_CHARDEV_NEEDS_REINIT        (-2)
 432
 433 /* #define AAC_DETAILED_STATUS_INFO */
 434
 435 struct diskparm
 436 {
 437         int heads;
 438         int sectors;
 439         int cylinders;
 440 };
 441
 442
 443 /*
 444  *      Firmware constants
 445  */
 446
 447 #define         CT_NONE                 0
 448 #define         CT_OK                   218
 449 #define         FT_FILESYS      8       /* ADAPTEC's "FSA"(tm) filesystem */
 450 #define         FT_DRIVE        9       /* physical disk - addressable in scsi by bus/id/lun */
 451
 452 /*
 453  *      Host side memory scatter gather list
 454  *      Used by the adapter for read, write, and readdirplus operations
 455  *      We have separate 32 and 64 bit version because even
 456  *      on 64 bit systems not all cards support the 64 bit version
 457  */
 458 struct sgentry {
 459         __le32  addr;   /* 32-bit address. */
 460         __le32  count;  /* Length. */
 461 };
 462
 463 struct user_sgentry {
 464         u32     addr;   /* 32-bit address. */
 465         u32     count;  /* Length. */
 466 };
 467
 468 struct sgentry64 {
 469         __le32  addr[2];        /* 64-bit addr. 2 pieces for data alignment */
 470         __le32  count;  /* Length. */
 471 };
 472
 473 struct user_sgentry64 {
 474         u32     addr[2];        /* 64-bit addr. 2 pieces for data alignment */
 475         u32     count;  /* Length. */
 476 };
 477
 478 struct sgentryraw {
 479         __le32          next;   /* reserved for F/W use */
 480         __le32          prev;   /* reserved for F/W use */
 481         __le32          addr[2];
 482         __le32          count;
 483         __le32          flags;  /* reserved for F/W use */
 484 };
 485
 486 struct user_sgentryraw {
 487         u32             next;   /* reserved for F/W use */
 488         u32             prev;   /* reserved for F/W use */
 489         u32             addr[2];
 490         u32             count;
 491         u32             flags;  /* reserved for F/W use */
 492 };
 493
 494 struct sge_ieee1212 {
 495         u32     addrLow;
 496         u32     addrHigh;
 497         u32     length;
 498         u32     flags;
 499 };
 500
 501 /*
 502  *      SGMAP
 503  *
 504  *      This is the SGMAP structure for all commands that use
 505  *      32-bit addressing.
 506  */
 507
 508 struct sgmap {
 509         __le32          count;
 510         struct sgentry  sg[];
 511 };
 512
 513 struct user_sgmap {
 514         u32             count;
 515         struct user_sgentry     sg[];
 516 };
 517
 518 struct sgmap64 {
 519         __le32          count;
 520         struct sgentry64 sg[];
 521 };
 522
 523 struct user_sgmap64 {
 524         u32             count;
 525         struct user_sgentry64 sg[];
 526 };
 527
 528 struct sgmapraw {
 529         __le32            count;
 530         struct sgentryraw sg[];
 531 };
 532
 533 struct creation_info
 534 {
 535         u8              buildnum;               /* e.g., 588 */
 536         u8              usec;                   /* e.g., 588 */
 537         u8              via;                    /* e.g., 1 = FSU,
 538                                                  *       2 = API
 539                                                  */
 540         u8              year;                   /* e.g., 1997 = 97 */
 541         __le32          date;                   /*
 542                                                  * unsigned     Month           :4;     // 1 - 12
 543                                                  * unsigned     Day             :6;     // 1 - 32
 544                                                  * unsigned     Hour            :6;     // 0 - 23
 545                                                  * unsigned     Minute          :6;     // 0 - 60
 546                                                  * unsigned     Second          :6;     // 0 - 60
 547                                                  */
 548         __le32          serial[2];                      /* e.g., 0x1DEADB0BFAFAF001 */
 549 };
 550
 551
 552 /*
 553  *      Define all the constants needed for the communication interface
 554  */
 555
 556 /*
 557  *      Define how many queue entries each queue will have and the total
 558  *      number of entries for the entire communication interface. Also define
 559  *      how many queues we support.
 560  *
 561  *      This has to match the controller
 562  */
 563
 564 #define NUMBER_OF_COMM_QUEUES  8   // 4 command; 4 response
 565 #define HOST_HIGH_CMD_ENTRIES  4
 566 #define HOST_NORM_CMD_ENTRIES  8
 567 #define ADAP_HIGH_CMD_ENTRIES  4
 568 #define ADAP_NORM_CMD_ENTRIES  512
 569 #define HOST_HIGH_RESP_ENTRIES 4
 570 #define HOST_NORM_RESP_ENTRIES 512
 571 #define ADAP_HIGH_RESP_ENTRIES 4
 572 #define ADAP_NORM_RESP_ENTRIES 8
 573
 574 #define TOTAL_QUEUE_ENTRIES  \
 575     (HOST_NORM_CMD_ENTRIES + HOST_HIGH_CMD_ENTRIES + ADAP_NORM_CMD_ENTRIES + ADAP_HIGH_CMD_ENTRIES + \
 576             HOST_NORM_RESP_ENTRIES + HOST_HIGH_RESP_ENTRIES + ADAP_NORM_RESP_ENTRIES + ADAP_HIGH_RESP_ENTRIES)
 577
 578
 579 /*
 580  *      Set the queues on a 16 byte alignment
 581  */
 582
 583 #define QUEUE_ALIGNMENT         16
 584
 585 /*
 586  *      The queue headers define the Communication Region queues. These
 587  *      are physically contiguous and accessible by both the adapter and the
 588  *      host. Even though all queue headers are in the same contiguous block
 589  *      they will be represented as individual units in the data structures.
 590  */
 591
 592 struct aac_entry {
 593         __le32 size; /* Size in bytes of Fib which this QE points to */
 594         __le32 addr; /* Receiver address of the FIB */
 595 };
 596
 597 /*
 598  *      The adapter assumes the ProducerIndex and ConsumerIndex are grouped
 599  *      adjacently and in that order.
 600  */
 601
 602 struct aac_qhdr {
 603         __le64 header_addr;/* Address to hand the adapter to access
 604                               to this queue head */
 605         __le32 *producer; /* The producer index for this queue (host address) */
 606         __le32 *consumer; /* The consumer index for this queue (host address) */
 607 };
 608
 609 /*
 610  *      Define all the events which the adapter would like to notify
 611  *      the host of.
 612  */
 613
 614 #define         HostNormCmdQue          1       /* Change in host normal priority command queue */
 615 #define         HostHighCmdQue          2       /* Change in host high priority command queue */
 616 #define         HostNormRespQue         3       /* Change in host normal priority response queue */
 617 #define         HostHighRespQue         4       /* Change in host high priority response queue */
 618 #define         AdapNormRespNotFull     5
 619 #define         AdapHighRespNotFull     6
 620 #define         AdapNormCmdNotFull      7
 621 #define         AdapHighCmdNotFull      8
 622 #define         SynchCommandComplete    9
 623 #define         AdapInternalError       0xfe    /* The adapter detected an internal error shutting down */
 624
 625 /*
 626  *      Define all the events the host wishes to notify the
 627  *      adapter of. The first four values much match the Qid the
 628  *      corresponding queue.
 629  */
 630
 631 #define         AdapNormCmdQue          2
 632 #define         AdapHighCmdQue          3
 633 #define         AdapNormRespQue         6
 634 #define         AdapHighRespQue         7
 635 #define         HostShutdown            8
 636 #define         HostPowerFail           9
 637 #define         FatalCommError          10
 638 #define         HostNormRespNotFull     11
 639 #define         HostHighRespNotFull     12
 640 #define         HostNormCmdNotFull      13
 641 #define         HostHighCmdNotFull      14
 642 #define         FastIo                  15
 643 #define         AdapPrintfDone          16
 644
 645 /*
 646  *      Define all the queues that the adapter and host use to communicate
 647  *      Number them to match the physical queue layout.
 648  */
 649
 650 enum aac_queue_types {
 651         HostNormCmdQueue = 0,   /* Adapter to host normal priority command traffic */
 652         HostHighCmdQueue,       /* Adapter to host high priority command traffic */
 653         AdapNormCmdQueue,       /* Host to adapter normal priority command traffic */
 654         AdapHighCmdQueue,       /* Host to adapter high priority command traffic */
 655         HostNormRespQueue,      /* Adapter to host normal priority response traffic */
 656         HostHighRespQueue,      /* Adapter to host high priority response traffic */
 657         AdapNormRespQueue,      /* Host to adapter normal priority response traffic */
 658         AdapHighRespQueue       /* Host to adapter high priority response traffic */
 659 };
 660
 661 /*
 662  *      Assign type values to the FSA communication data structures
 663  */
 664
 665 #define         FIB_MAGIC       0x0001
 666 #define         FIB_MAGIC2      0x0004
 667 #define         FIB_MAGIC2_64   0x0005
 668
 669 /*
 670  *      Define the priority levels the FSA communication routines support.
 671  */
 672
 673 #define         FsaNormal       1
 674
 675 /* transport FIB header (PMC) */
 676 struct aac_fib_xporthdr {
 677         __le64  HostAddress;    /* FIB host address w/o xport header */
 678         __le32  Size;           /* FIB size excluding xport header */
 679         __le32  Handle;         /* driver handle to reference the FIB */
 680         __le64  Reserved[2];
 681 };
 682
 683 #define         ALIGN32         32
 684
 685 /*
 686  * Define the FIB. The FIB is the where all the requested data and
 687  * command information are put to the application on the FSA adapter.
 688  */
 689
 690 struct aac_fibhdr {
 691         __le32 XferState;       /* Current transfer state for this CCB */
 692         __le16 Command;         /* Routing information for the destination */
 693         u8 StructType;          /* Type FIB */
 694         u8 Unused;              /* Unused */
 695         __le16 Size;            /* Size of this FIB in bytes */
 696         __le16 SenderSize;      /* Size of the FIB in the sender
 697                                    (for response sizing) */
 698         __le32 SenderFibAddress;  /* Host defined data in the FIB */
 699         union {
 700                 __le32 ReceiverFibAddress;/* Logical address of this FIB for
 701                                      the adapter (old) */
 702                 __le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */
 703                 __le32 TimeStamp;       /* otherwise timestamp for FW internal use */
 704         } u;
 705         __le32 Handle;          /* FIB handle used for MSGU commnunication */
 706         u32 Previous;           /* FW internal use */
 707         u32 Next;               /* FW internal use */
 708 };
 709
 710 struct hw_fib {
 711         struct aac_fibhdr header;
 712         u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data
 713 };
 714
 715 /*
 716  *      FIB commands
 717  */
 718
 719 #define         TestCommandResponse             1
 720 #define         TestAdapterCommand              2
 721 /*
 722  *      Lowlevel and comm commands
 723  */
 724 #define         LastTestCommand                 100
 725 #define         ReinitHostNormCommandQueue      101
 726 #define         ReinitHostHighCommandQueue      102
 727 #define         ReinitHostHighRespQueue         103
 728 #define         ReinitHostNormRespQueue         104
 729 #define         ReinitAdapNormCommandQueue      105
 730 #define         ReinitAdapHighCommandQueue      107
 731 #define         ReinitAdapHighRespQueue         108
 732 #define         ReinitAdapNormRespQueue         109
 733 #define         InterfaceShutdown               110
 734 #define         DmaCommandFib                   120
 735 #define         StartProfile                    121
 736 #define         TermProfile                     122
 737 #define         SpeedTest                       123
 738 #define         TakeABreakPt                    124
 739 #define         RequestPerfData                 125
 740 #define         SetInterruptDefTimer            126
 741 #define         SetInterruptDefCount            127
 742 #define         GetInterruptDefStatus           128
 743 #define         LastCommCommand                 129
 744 /*
 745  *      Filesystem commands
 746  */
 747 #define         NuFileSystem                    300
 748 #define         UFS                             301
 749 #define         HostFileSystem                  302
 750 #define         LastFileSystemCommand           303
 751 /*
 752  *      Container Commands
 753  */
 754 #define         ContainerCommand                500
 755 #define         ContainerCommand64              501
 756 #define         ContainerRawIo                  502
 757 #define         ContainerRawIo2                 503
 758 /*
 759  *      Scsi Port commands (scsi passthrough)
 760  */
 761 #define         ScsiPortCommand                 600
 762 #define         ScsiPortCommand64               601
 763 /*
 764  *      Misc house keeping and generic adapter initiated commands
 765  */
 766 #define         AifRequest                      700
 767 #define         CheckRevision                   701
 768 #define         FsaHostShutdown                 702
 769 #define         RequestAdapterInfo              703
 770 #define         IsAdapterPaused                 704
 771 #define         SendHostTime                    705
 772 #define         RequestSupplementAdapterInfo    706
 773 #define         LastMiscCommand                 707
 774
 775 /*
 776  * Commands that will target the failover level on the FSA adapter
 777  */
 778
 779 enum fib_xfer_state {
 780         HostOwned                       = (1<<0),
 781         AdapterOwned                    = (1<<1),
 782         FibInitialized                  = (1<<2),
 783         FibEmpty                        = (1<<3),
 784         AllocatedFromPool               = (1<<4),
 785         SentFromHost                    = (1<<5),
 786         SentFromAdapter                 = (1<<6),
 787         ResponseExpected                = (1<<7),
 788         NoResponseExpected              = (1<<8),
 789         AdapterProcessed                = (1<<9),
 790         HostProcessed                   = (1<<10),
 791         HighPriority                    = (1<<11),
 792         NormalPriority                  = (1<<12),
 793         Async                           = (1<<13),
 794         AsyncIo                         = (1<<13),      // rpbfix: remove with new regime
 795         PageFileIo                      = (1<<14),      // rpbfix: remove with new regime
 796         ShutdownRequest                 = (1<<15),
 797         LazyWrite                       = (1<<16),      // rpbfix: remove with new regime
 798         AdapterMicroFib                 = (1<<17),
 799         BIOSFibPath                     = (1<<18),
 800         FastResponseCapable             = (1<<19),
 801         ApiFib                          = (1<<20),      /* Its an API Fib */
 802         /* PMC NEW COMM: There is no more AIF data pending */
 803         NoMoreAifDataAvailable          = (1<<21)
 804 };
 805
 806 /*
 807  *      The following defines needs to be updated any time there is an
 808  *      incompatible change made to the aac_init structure.
 809  */
 810
 811 #define ADAPTER_INIT_STRUCT_REVISION            3
 812 #define ADAPTER_INIT_STRUCT_REVISION_4          4 // rocket science
 813 #define ADAPTER_INIT_STRUCT_REVISION_6          6 /* PMC src */
 814 #define ADAPTER_INIT_STRUCT_REVISION_7          7 /* Denali */
 815 #define ADAPTER_INIT_STRUCT_REVISION_8          8 // Thor
 816
 817 union aac_init
 818 {
 819         struct _r7 {
 820                 __le32  init_struct_revision;
 821                 __le32  no_of_msix_vectors;
 822                 __le32  fsrev;
 823                 __le32  comm_header_address;
 824                 __le32  fast_io_comm_area_address;
 825                 __le32  adapter_fibs_physical_address;
 826                 __le32  adapter_fibs_virtual_address;
 827                 __le32  adapter_fibs_size;
 828                 __le32  adapter_fib_align;
 829                 __le32  printfbuf;
 830                 __le32  printfbufsiz;
 831                 /* number of 4k pages of host phys. mem. */
 832                 __le32  host_phys_mem_pages;
 833                 /* number of seconds since 1970. */
 834                 __le32  host_elapsed_seconds;
 835                 /* ADAPTER_INIT_STRUCT_REVISION_4 begins here */
 836                 __le32  init_flags;     /* flags for supported features */
 837 #define INITFLAGS_NEW_COMM_SUPPORTED    0x00000001
 838 #define INITFLAGS_DRIVER_USES_UTC_TIME  0x00000010
 839 #define INITFLAGS_DRIVER_SUPPORTS_PM    0x00000020
 840 #define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED      0x00000040
 841 #define INITFLAGS_FAST_JBOD_SUPPORTED   0x00000080
 842 #define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED      0x00000100
 843 #define INITFLAGS_DRIVER_SUPPORTS_HBA_MODE  0x00000400
 844                 __le32  max_io_commands;        /* max outstanding commands */
 845                 __le32  max_io_size;    /* largest I/O command */
 846                 __le32  max_fib_size;   /* largest FIB to adapter */
 847                 /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */
 848                 __le32  max_num_aif;    /* max number of aif */
 849                 /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */
 850                 /* Host RRQ (response queue) for SRC */
 851                 __le32  host_rrq_addr_low;
 852                 __le32  host_rrq_addr_high;
 853         } r7;
 854         struct _r8 {
 855                 /* ADAPTER_INIT_STRUCT_REVISION_8 */
 856                 __le32  init_struct_revision;
 857                 __le32  rr_queue_count;
 858                 __le32  host_elapsed_seconds; /* number of secs since 1970. */
 859                 __le32  init_flags;
 860                 __le32  max_io_size;    /* largest I/O command */
 861                 __le32  max_num_aif;    /* max number of aif */
 862                 __le32  reserved1;
 863                 __le32  reserved2;
 864                 struct _rrq {
 865                         __le32  host_addr_low;
 866                         __le32  host_addr_high;
 867                         __le16  msix_id;
 868                         __le16  element_count;
 869                         __le16  comp_thresh;
 870                         __le16  unused;
 871                 } rrq[] __counted_by_le(rr_queue_count); /* up to 64 RRQ addresses */
 872         } r8;
 873 };
 874
 875 enum aac_log_level {
 876         LOG_AAC_INIT                    = 10,
 877         LOG_AAC_INFORMATIONAL           = 20,
 878         LOG_AAC_WARNING                 = 30,
 879         LOG_AAC_LOW_ERROR               = 40,
 880         LOG_AAC_MEDIUM_ERROR            = 50,
 881         LOG_AAC_HIGH_ERROR              = 60,
 882         LOG_AAC_PANIC                   = 70,
 883         LOG_AAC_DEBUG                   = 80,
 884         LOG_AAC_WINDBG_PRINT            = 90
 885 };
 886
 887 #define FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT       0x030b
 888 #define FSAFS_NTC_FIB_CONTEXT                   0x030c
 889
 890 struct aac_dev;
 891 struct fib;
 892 struct scsi_cmnd;
 893
 894 struct adapter_ops
 895 {
 896         /* Low level operations */
 897         void (*adapter_interrupt)(struct aac_dev *dev);
 898         void (*adapter_notify)(struct aac_dev *dev, u32 event);
 899         void (*adapter_disable_int)(struct aac_dev *dev);
 900         void (*adapter_enable_int)(struct aac_dev *dev);
 901         int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 902         int  (*adapter_check_health)(struct aac_dev *dev);
 903         int  (*adapter_restart)(struct aac_dev *dev, int bled, u8 reset_type);
 904         void (*adapter_start)(struct aac_dev *dev);
 905         /* Transport operations */
 906         int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
 907         irq_handler_t adapter_intr;
 908         /* Packet operations */
 909         int  (*adapter_deliver)(struct fib * fib);
 910         int  (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba);
 911         int  (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count);
 912         int  (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua);
 913         int  (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd);
 914         /* Administrative operations */
 915         int  (*adapter_comm)(struct aac_dev * dev, int comm);
 916 };
 917
 918 /*
 919  *      Define which interrupt handler needs to be installed
 920  */
 921
 922 struct aac_driver_ident
 923 {
 924         int     (*init)(struct aac_dev *dev);
 925         char *  name;
 926         char *  vname;
 927         char *  model;
 928         u16     channels;
 929         int     quirks;
 930 };
 931 /*
 932  * Some adapter firmware needs communication memory
 933  * below 2gig. This tells the init function to set the
 934  * dma mask such that fib memory will be allocated where the
 935  * adapter firmware can get to it.
 936  */
 937 #define AAC_QUIRK_31BIT 0x0001
 938
 939 /*
 940  * Some adapter firmware, when the raid card's cache is turned off, can not
 941  * split up scatter gathers in order to deal with the limits of the
 942  * underlying CHIM. This limit is 34 scatter gather elements.
 943  */
 944 #define AAC_QUIRK_34SG  0x0002
 945
 946 /*
 947  * This adapter is a slave (no Firmware)
 948  */
 949 #define AAC_QUIRK_SLAVE 0x0004
 950
 951 /*
 952  * This adapter is a master.
 953  */
 954 #define AAC_QUIRK_MASTER 0x0008
 955
 956 /*
 957  * Some adapter firmware perform poorly when it must split up scatter gathers
 958  * in order to deal with the limits of the underlying CHIM. This limit in this
 959  * class of adapters is 17 scatter gather elements.
 960  */
 961 #define AAC_QUIRK_17SG  0x0010
 962
 963 /*
 964  *      Some adapter firmware does not support 64 bit scsi passthrough
 965  * commands.
 966  */
 967 #define AAC_QUIRK_SCSI_32       0x0020
 968
 969 /*
 970  * SRC based adapters support the AifReqEvent functions
 971  */
 972 #define AAC_QUIRK_SRC 0x0040
 973
 974 /*
 975  *      The adapter interface specs all queues to be located in the same
 976  *      physically contiguous block. The host structure that defines the
 977  *      commuication queues will assume they are each a separate physically
 978  *      contiguous memory region that will support them all being one big
 979  *      contiguous block.
 980  *      There is a command and response queue for each level and direction of
 981  *      commuication. These regions are accessed by both the host and adapter.
 982  */
 983
 984 struct aac_queue {
 985         u64                     logical;        /*address we give the adapter */
 986         struct aac_entry        *base;          /*system virtual address */
 987         struct aac_qhdr         headers;        /*producer,consumer q headers*/
 988         u32                     entries;        /*Number of queue entries */
 989         wait_queue_head_t       qfull;          /*Event to wait on if q full */
 990         wait_queue_head_t       cmdready;       /*Cmd ready from the adapter */
 991                 /* This is only valid for adapter to host command queues. */
 992         spinlock_t              *lock;          /* Spinlock for this queue must take this lock before accessing the lock */
 993         spinlock_t              lockdata;       /* Actual lock (used only on one side of the lock) */
 994         struct list_head        cmdq;           /* A queue of FIBs which need to be prcessed by the FS thread. This is */
 995                                                 /* only valid for command queues which receive entries from the adapter. */
 996         /* Number of entries on outstanding queue. */
 997         atomic_t                numpending;
 998         struct aac_dev *        dev;            /* Back pointer to adapter structure */
 999 };
1000
1001 /*
1002  *      Message queues. The order here is important, see also the
1003  *      queue type ordering
1004  */
1005
1006 struct aac_queue_block
1007 {
1008         struct aac_queue queue[8];
1009 };
1010
1011 /*
1012  *      SaP1 Message Unit Registers
1013  */
1014
1015 struct sa_drawbridge_CSR {
1016                                 /*      Offset  |  Name */
1017         __le32  reserved[10];   /*      00h-27h |  Reserved */
1018         u8      LUT_Offset;     /*      28h     |  Lookup Table Offset */
1019         u8      reserved1[3];   /*      29h-2bh |  Reserved */
1020         __le32  LUT_Data;       /*      2ch     |  Looup Table Data */
1021         __le32  reserved2[26];  /*      30h-97h |  Reserved */
1022         __le16  PRICLEARIRQ;    /*      98h     |  Primary Clear Irq */
1023         __le16  SECCLEARIRQ;    /*      9ah     |  Secondary Clear Irq */
1024         __le16  PRISETIRQ;      /*      9ch     |  Primary Set Irq */
1025         __le16  SECSETIRQ;      /*      9eh     |  Secondary Set Irq */
1026         __le16  PRICLEARIRQMASK;/*      a0h     |  Primary Clear Irq Mask */
1027         __le16  SECCLEARIRQMASK;/*      a2h     |  Secondary Clear Irq Mask */
1028         __le16  PRISETIRQMASK;  /*      a4h     |  Primary Set Irq Mask */
1029         __le16  SECSETIRQMASK;  /*      a6h     |  Secondary Set Irq Mask */
1030         __le32  MAILBOX0;       /*      a8h     |  Scratchpad 0 */
1031         __le32  MAILBOX1;       /*      ach     |  Scratchpad 1 */
1032         __le32  MAILBOX2;       /*      b0h     |  Scratchpad 2 */
1033         __le32  MAILBOX3;       /*      b4h     |  Scratchpad 3 */
1034         __le32  MAILBOX4;       /*      b8h     |  Scratchpad 4 */
1035         __le32  MAILBOX5;       /*      bch     |  Scratchpad 5 */
1036         __le32  MAILBOX6;       /*      c0h     |  Scratchpad 6 */
1037         __le32  MAILBOX7;       /*      c4h     |  Scratchpad 7 */
1038         __le32  ROM_Setup_Data; /*      c8h     |  Rom Setup and Data */
1039         __le32  ROM_Control_Addr;/*     cch     |  Rom Control and Address */
1040         __le32  reserved3[12];  /*      d0h-ffh |  reserved */
1041         __le32  LUT[64];        /*    100h-1ffh |  Lookup Table Entries */
1042 };
1043
1044 #define Mailbox0        SaDbCSR.MAILBOX0
1045 #define Mailbox1        SaDbCSR.MAILBOX1
1046 #define Mailbox2        SaDbCSR.MAILBOX2
1047 #define Mailbox3        SaDbCSR.MAILBOX3
1048 #define Mailbox4        SaDbCSR.MAILBOX4
1049 #define Mailbox5        SaDbCSR.MAILBOX5
1050 #define Mailbox6        SaDbCSR.MAILBOX6
1051 #define Mailbox7        SaDbCSR.MAILBOX7
1052
1053 #define DoorbellReg_p SaDbCSR.PRISETIRQ
1054 #define DoorbellReg_s SaDbCSR.SECSETIRQ
1055 #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ
1056
1057
1058 #define DOORBELL_0      0x0001
1059 #define DOORBELL_1      0x0002
1060 #define DOORBELL_2      0x0004
1061 #define DOORBELL_3      0x0008
1062 #define DOORBELL_4      0x0010
1063 #define DOORBELL_5      0x0020
1064 #define DOORBELL_6      0x0040
1065
1066
1067 #define PrintfReady     DOORBELL_5
1068 #define PrintfDone      DOORBELL_5
1069
1070 struct sa_registers {
1071         struct sa_drawbridge_CSR        SaDbCSR;                        /* 98h - c4h */
1072 };
1073
1074
1075 #define SA_INIT_NUM_MSIXVECTORS         1
1076 #define SA_MINIPORT_REVISION            SA_INIT_NUM_MSIXVECTORS
1077
1078 #define sa_readw(AEP, CSR)              readl(&((AEP)->regs.sa->CSR))
1079 #define sa_readl(AEP, CSR)              readl(&((AEP)->regs.sa->CSR))
1080 #define sa_writew(AEP, CSR, value)      writew(value, &((AEP)->regs.sa->CSR))
1081 #define sa_writel(AEP, CSR, value)      writel(value, &((AEP)->regs.sa->CSR))
1082
1083 /*
1084  *      Rx Message Unit Registers
1085  */
1086
1087 struct rx_mu_registers {
1088                             /*  Local  | PCI*| Name */
1089         __le32  ARSR;       /*  1300h  | 00h | APIC Register Select Register */
1090         __le32  reserved0;  /*  1304h  | 04h | Reserved */
1091         __le32  AWR;        /*  1308h  | 08h | APIC Window Register */
1092         __le32  reserved1;  /*  130Ch  | 0Ch | Reserved */
1093         __le32  IMRx[2];    /*  1310h  | 10h | Inbound Message Registers */
1094         __le32  OMRx[2];    /*  1318h  | 18h | Outbound Message Registers */
1095         __le32  IDR;        /*  1320h  | 20h | Inbound Doorbell Register */
1096         __le32  IISR;       /*  1324h  | 24h | Inbound Interrupt
1097                                                 Status Register */
1098         __le32  IIMR;       /*  1328h  | 28h | Inbound Interrupt
1099                                                 Mask Register */
1100         __le32  ODR;        /*  132Ch  | 2Ch | Outbound Doorbell Register */
1101         __le32  OISR;       /*  1330h  | 30h | Outbound Interrupt
1102                                                 Status Register */
1103         __le32  OIMR;       /*  1334h  | 34h | Outbound Interrupt
1104                                                 Mask Register */
1105         __le32  reserved2;  /*  1338h  | 38h | Reserved */
1106         __le32  reserved3;  /*  133Ch  | 3Ch | Reserved */
1107         __le32  InboundQueue;/* 1340h  | 40h | Inbound Queue Port relative to firmware */
1108         __le32  OutboundQueue;/*1344h  | 44h | Outbound Queue Port relative to firmware */
1109                             /* * Must access through ATU Inbound
1110                                  Translation Window */
1111 };
1112
1113 struct rx_inbound {
1114         __le32  Mailbox[8];
1115 };
1116
1117 #define INBOUNDDOORBELL_0       0x00000001
1118 #define INBOUNDDOORBELL_1       0x00000002
1119 #define INBOUNDDOORBELL_2       0x00000004
1120 #define INBOUNDDOORBELL_3       0x00000008
1121 #define INBOUNDDOORBELL_4       0x00000010
1122 #define INBOUNDDOORBELL_5       0x00000020
1123 #define INBOUNDDOORBELL_6       0x00000040
1124
1125 #define OUTBOUNDDOORBELL_0      0x00000001
1126 #define OUTBOUNDDOORBELL_1      0x00000002
1127 #define OUTBOUNDDOORBELL_2      0x00000004
1128 #define OUTBOUNDDOORBELL_3      0x00000008
1129 #define OUTBOUNDDOORBELL_4      0x00000010
1130
1131 #define InboundDoorbellReg      MUnit.IDR
1132 #define OutboundDoorbellReg     MUnit.ODR
1133
1134 struct rx_registers {
1135         struct rx_mu_registers          MUnit;          /* 1300h - 1347h */
1136         __le32                          reserved1[2];   /* 1348h - 134ch */
1137         struct rx_inbound               IndexRegs;
1138 };
1139
1140 #define rx_readb(AEP, CSR)              readb(&((AEP)->regs.rx->CSR))
1141 #define rx_readl(AEP, CSR)              readl(&((AEP)->regs.rx->CSR))
1142 #define rx_writeb(AEP, CSR, value)      writeb(value, &((AEP)->regs.rx->CSR))
1143 #define rx_writel(AEP, CSR, value)      writel(value, &((AEP)->regs.rx->CSR))
1144
1145 /*
1146  *      Rkt Message Unit Registers (same as Rx, except a larger reserve region)
1147  */
1148
1149 #define rkt_mu_registers rx_mu_registers
1150 #define rkt_inbound rx_inbound
1151
1152 struct rkt_registers {
1153         struct rkt_mu_registers         MUnit;           /* 1300h - 1347h */
1154         __le32                          reserved1[1006]; /* 1348h - 22fch */
1155         struct rkt_inbound              IndexRegs;       /* 2300h - */
1156 };
1157
1158 #define rkt_readb(AEP, CSR)             readb(&((AEP)->regs.rkt->CSR))
1159 #define rkt_readl(AEP, CSR)             readl(&((AEP)->regs.rkt->CSR))
1160 #define rkt_writeb(AEP, CSR, value)     writeb(value, &((AEP)->regs.rkt->CSR))
1161 #define rkt_writel(AEP, CSR, value)     writel(value, &((AEP)->regs.rkt->CSR))
1162
1163 /*
1164  * PMC SRC message unit registers
1165  */
1166
1167 #define src_inbound rx_inbound
1168
1169 struct src_mu_registers {
1170                                 /*  PCI*| Name */
1171         __le32  reserved0[6];   /*  00h | Reserved */
1172         __le32  IOAR[2];        /*  18h | IOA->host interrupt register */
1173         __le32  IDR;            /*  20h | Inbound Doorbell Register */
1174         __le32  IISR;           /*  24h | Inbound Int. Status Register */
1175         __le32  reserved1[3];   /*  28h | Reserved */
1176         __le32  OIMR;           /*  34h | Outbound Int. Mask Register */
1177         __le32  reserved2[25];  /*  38h | Reserved */
1178         __le32  ODR_R;          /*  9ch | Outbound Doorbell Read */
1179         __le32  ODR_C;          /*  a0h | Outbound Doorbell Clear */
1180         __le32  reserved3[3];   /*  a4h | Reserved */
1181         __le32  SCR0;           /*  b0h | Scratchpad 0 */
1182         __le32  reserved4[2];   /*  b4h | Reserved */
1183         __le32  OMR;            /*  bch | Outbound Message Register */
1184         __le32  IQ_L;           /*  c0h | Inbound Queue (Low address) */
1185         __le32  IQ_H;           /*  c4h | Inbound Queue (High address) */
1186         __le32  ODR_MSI;        /*  c8h | MSI register for sync./AIF */
1187         __le32  reserved5;      /*  cch | Reserved */
1188         __le32  IQN_L;          /*  d0h | Inbound (native cmd) low  */
1189         __le32  IQN_H;          /*  d4h | Inbound (native cmd) high */
1190 };
1191
1192 struct src_registers {
1193         struct src_mu_registers MUnit;  /* 00h - cbh */
1194         union {
1195                 struct {
1196                         __le32 reserved1[130786];       /* d8h - 7fc5fh */
1197                         struct src_inbound IndexRegs;   /* 7fc60h */
1198                 } tupelo;
1199                 struct {
1200                         __le32 reserved1[970];          /* d8h - fffh */
1201                         struct src_inbound IndexRegs;   /* 1000h */
1202                 } denali;
1203         } u;
1204 };
1205
1206 #define src_readb(AEP, CSR)             readb(&((AEP)->regs.src.bar0->CSR))
1207 #define src_readl(AEP, CSR)             readl(&((AEP)->regs.src.bar0->CSR))
1208 #define src_writeb(AEP, CSR, value)     writeb(value, \
1209                                                 &((AEP)->regs.src.bar0->CSR))
1210 #define src_writel(AEP, CSR, value)     writel(value, \
1211                                                 &((AEP)->regs.src.bar0->CSR))
1212 #if defined(writeq)
1213 #define src_writeq(AEP, CSR, value)     writeq(value, \
1214                                                 &((AEP)->regs.src.bar0->CSR))
1215 #endif
1216
1217 #define SRC_ODR_SHIFT           12
1218 #define SRC_IDR_SHIFT           9
1219 #define SRC_MSI_READ_MASK       0x1000
1220
1221 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
1222
1223 struct aac_fib_context {
1224         s16                     type;           // used for verification of structure
1225         s16                     size;
1226         u32                     unique;         // unique value representing this context
1227         ulong                   jiffies;        // used for cleanup - dmb changed to ulong
1228         struct list_head        next;           // used to link context's into a linked list
1229         struct completion       completion;     // this is used to wait for the next fib to arrive.
1230         int                     wait;           // Set to true when thread is in WaitForSingleObject
1231         unsigned long           count;          // total number of FIBs on FibList
1232         struct list_head        fib_list;       // this holds fibs and their attachd hw_fibs
1233 };
1234
1235 struct sense_data {
1236         u8 error_code;          /* 70h (current errors), 71h(deferred errors) */
1237         u8 valid:1;             /* A valid bit of one indicates that the information  */
1238                                 /* field contains valid information as defined in the
1239                                  * SCSI-2 Standard.
1240                                  */
1241         u8 segment_number;      /* Only used for COPY, COMPARE, or COPY AND VERIFY Commands */
1242         u8 sense_key:4;         /* Sense Key */
1243         u8 reserved:1;
1244         u8 ILI:1;               /* Incorrect Length Indicator */
1245         u8 EOM:1;               /* End Of Medium - reserved for random access devices */
1246         u8 filemark:1;          /* Filemark - reserved for random access devices */
1247
1248         u8 information[4];      /* for direct-access devices, contains the unsigned
1249                                  * logical block address or residue associated with
1250                                  * the sense key
1251                                  */
1252         u8 add_sense_len;       /* number of additional sense bytes to follow this field */
1253         u8 cmnd_info[4];        /* not used */
1254         u8 ASC;                 /* Additional Sense Code */
1255         u8 ASCQ;                /* Additional Sense Code Qualifier */
1256         u8 FRUC;                /* Field Replaceable Unit Code - not used */
1257         u8 bit_ptr:3;           /* indicates which byte of the CDB or parameter data
1258                                  * was in error
1259                                  */
1260         u8 BPV:1;               /* bit pointer valid (BPV): 1- indicates that
1261                                  * the bit_ptr field has valid value
1262                                  */
1263         u8 reserved2:2;
1264         u8 CD:1;                /* command data bit: 1- illegal parameter in CDB.
1265                                  * 0- illegal parameter in data.
1266                                  */
1267         u8 SKSV:1;
1268         u8 field_ptr[2];        /* byte of the CDB or parameter data in error */
1269 };
1270
1271 struct fsa_dev_info {
1272         u64             last;
1273         u64             size;
1274         u32             type;
1275         u32             config_waiting_on;
1276         unsigned long   config_waiting_stamp;
1277         u16             queue_depth;
1278         u8              config_needed;
1279         u8              valid;
1280         u8              ro;
1281         u8              locked;
1282         u8              deleted;
1283         char            devname[8];
1284         struct sense_data sense_data;
1285         u32             block_size;
1286         u8              identifier[16];
1287 };
1288
1289 struct fib {
1290         void                    *next;  /* this is used by the allocator */
1291         s16                     type;
1292         s16                     size;
1293         /*
1294          *      The Adapter that this I/O is destined for.
1295          */
1296         struct aac_dev          *dev;
1297         /*
1298          *      This is the event the sendfib routine will wait on if the
1299          *      caller did not pass one and this is synch io.
1300          */
1301         struct completion       event_wait;
1302         spinlock_t              event_lock;
1303
1304         u32                     done;   /* gets set to 1 when fib is complete */
1305         fib_callback            callback;
1306         void                    *callback_data;
1307         u32                     flags; // u32 dmb was ulong
1308         /*
1309          *      And for the internal issue/reply queues (we may be able
1310          *      to merge these two)
1311          */
1312         struct list_head        fiblink;
1313         void                    *data;
1314         u32                     vector_no;
1315         struct hw_fib           *hw_fib_va;     /* also used for native */
1316         dma_addr_t              hw_fib_pa;      /* physical address of hw_fib*/
1317         dma_addr_t              hw_sgl_pa;      /* extra sgl for native */
1318         dma_addr_t              hw_error_pa;    /* error buffer for native */
1319         u32                     hbacmd_size;    /* cmd size for native */
1320 };
1321
1322 #define AAC_INIT                        0
1323 #define AAC_RESCAN                      1
1324
1325 #define AAC_DEVTYPE_RAID_MEMBER 1
1326 #define AAC_DEVTYPE_ARC_RAW             2
1327 #define AAC_DEVTYPE_NATIVE_RAW          3
1328
1329 #define AAC_RESCAN_DELAY                (10 * HZ)
1330
1331 struct aac_hba_map_info {
1332         __le32  rmw_nexus;              /* nexus for native HBA devices */
1333         u8              devtype;        /* device type */
1334         s8              reset_state;    /* 0 - no reset, 1..x - */
1335                                         /* after xth TM LUN reset */
1336         u16             qd_limit;
1337         u32             scan_counter;
1338         struct aac_ciss_identify_pd  *safw_identify_resp;
1339 };
1340
1341 /*
1342  *      Adapter Information Block
1343  *
1344  *      This is returned by the RequestAdapterInfo block
1345  */
1346
1347 struct aac_adapter_info
1348 {
1349         __le32  platform;
1350         __le32  cpu;
1351         __le32  subcpu;
1352         __le32  clock;
1353         __le32  execmem;
1354         __le32  buffermem;
1355         __le32  totalmem;
1356         __le32  kernelrev;
1357         __le32  kernelbuild;
1358         __le32  monitorrev;
1359         __le32  monitorbuild;
1360         __le32  hwrev;
1361         __le32  hwbuild;
1362         __le32  biosrev;
1363         __le32  biosbuild;
1364         __le32  cluster;
1365         __le32  clusterchannelmask;
1366         __le32  serial[2];
1367         __le32  battery;
1368         __le32  options;
1369         __le32  OEM;
1370 };
1371
1372 struct aac_supplement_adapter_info
1373 {
1374         u8      adapter_type_text[17+1];
1375         u8      pad[2];
1376         __le32  flash_memory_byte_size;
1377         __le32  flash_image_id;
1378         __le32  max_number_ports;
1379         __le32  version;
1380         __le32  feature_bits;
1381         u8      slot_number;
1382         u8      reserved_pad0[3];
1383         u8      build_date[12];
1384         __le32  current_number_ports;
1385         struct {
1386                 u8      assembly_pn[8];
1387                 u8      fru_pn[8];
1388                 u8      battery_fru_pn[8];
1389                 u8      ec_version_string[8];
1390                 u8      tsid[12];
1391         }       vpd_info;
1392         __le32  flash_firmware_revision;
1393         __le32  flash_firmware_build;
1394         __le32  raid_type_morph_options;
1395         __le32  flash_firmware_boot_revision;
1396         __le32  flash_firmware_boot_build;
1397         u8      mfg_pcba_serial_no[12];
1398         u8      mfg_wwn_name[8];
1399         __le32  supported_options2;
1400         __le32  struct_expansion;
1401         /* StructExpansion == 1 */
1402         __le32  feature_bits3;
1403         __le32  supported_performance_modes;
1404         u8      host_bus_type;          /* uses HOST_BUS_TYPE_xxx defines */
1405         u8      host_bus_width;         /* actual width in bits or links */
1406         u16     host_bus_speed;         /* actual bus speed/link rate in MHz */
1407         u8      max_rrc_drives;         /* max. number of ITP-RRC drives/pool */
1408         u8      max_disk_xtasks;        /* max. possible num of DiskX Tasks */
1409
1410         u8      cpld_ver_loaded;
1411         u8      cpld_ver_in_flash;
1412
1413         __le64  max_rrc_capacity;
1414         __le32  compiled_max_hist_log_level;
1415         u8      custom_board_name[12];
1416         u16     supported_cntlr_mode;   /* identify supported controller mode */
1417         u16     reserved_for_future16;
1418         __le32  supported_options3;     /* reserved for future options */
1419
1420         __le16  virt_device_bus;                /* virt. SCSI device for Thor */
1421         __le16  virt_device_target;
1422         __le16  virt_device_lun;
1423         __le16  unused;
1424         __le32  reserved_for_future_growth[68];
1425
1426 };
1427 #define AAC_FEATURE_FALCON      cpu_to_le32(0x00000010)
1428 #define AAC_FEATURE_JBOD        cpu_to_le32(0x08000000)
1429 /* SupportedOptions2 */
1430 #define AAC_OPTION_MU_RESET             cpu_to_le32(0x00000001)
1431 #define AAC_OPTION_IGNORE_RESET         cpu_to_le32(0x00000002)
1432 #define AAC_OPTION_POWER_MANAGEMENT     cpu_to_le32(0x00000004)
1433 #define AAC_OPTION_DOORBELL_RESET       cpu_to_le32(0x00004000)
1434 /* 4KB sector size */
1435 #define AAC_OPTION_VARIABLE_BLOCK_SIZE  cpu_to_le32(0x00040000)
1436 /* 240 simple volume support */
1437 #define AAC_OPTION_SUPPORTED_240_VOLUMES cpu_to_le32(0x10000000)
1438 /*
1439  * Supports FIB dump sync command send prior to IOP_RESET
1440  */
1441 #define AAC_OPTION_SUPPORTED3_IOP_RESET_FIB_DUMP        cpu_to_le32(0x00004000)
1442 #define AAC_SIS_VERSION_V3      3
1443 #define AAC_SIS_SLOT_UNKNOWN    0xFF
1444
1445 #define GetBusInfo 0x00000009
1446 struct aac_bus_info {
1447         __le32  Command;        /* VM_Ioctl */
1448         __le32  ObjType;        /* FT_DRIVE */
1449         __le32  MethodId;       /* 1 = SCSI Layer */
1450         __le32  ObjectId;       /* Handle */
1451         __le32  CtlCmd;         /* GetBusInfo */
1452 };
1453
1454 struct aac_bus_info_response {
1455         __le32  Status;         /* ST_OK */
1456         __le32  ObjType;
1457         __le32  MethodId;       /* unused */
1458         __le32  ObjectId;       /* unused */
1459         __le32  CtlCmd;         /* unused */
1460         __le32  ProbeComplete;
1461         __le32  BusCount;
1462         __le32  TargetsPerBus;
1463         u8      InitiatorBusId[10];
1464         u8      BusValid[10];
1465 };
1466
1467 /*
1468  * Battery platforms
1469  */
1470 #define AAC_BAT_REQ_PRESENT     (1)
1471 #define AAC_BAT_REQ_NOTPRESENT  (2)
1472 #define AAC_BAT_OPT_PRESENT     (3)
1473 #define AAC_BAT_OPT_NOTPRESENT  (4)
1474 #define AAC_BAT_NOT_SUPPORTED   (5)
1475 /*
1476  * cpu types
1477  */
1478 #define AAC_CPU_SIMULATOR       (1)
1479 #define AAC_CPU_I960            (2)
1480 #define AAC_CPU_STRONGARM       (3)
1481
1482 /*
1483  * Supported Options
1484  */
1485 #define AAC_OPT_SNAPSHOT                cpu_to_le32(1)
1486 #define AAC_OPT_CLUSTERS                cpu_to_le32(1<<1)
1487 #define AAC_OPT_WRITE_CACHE             cpu_to_le32(1<<2)
1488 #define AAC_OPT_64BIT_DATA              cpu_to_le32(1<<3)
1489 #define AAC_OPT_HOST_TIME_FIB           cpu_to_le32(1<<4)
1490 #define AAC_OPT_RAID50                  cpu_to_le32(1<<5)
1491 #define AAC_OPT_4GB_WINDOW              cpu_to_le32(1<<6)
1492 #define AAC_OPT_SCSI_UPGRADEABLE        cpu_to_le32(1<<7)
1493 #define AAC_OPT_SOFT_ERR_REPORT         cpu_to_le32(1<<8)
1494 #define AAC_OPT_SUPPORTED_RECONDITION   cpu_to_le32(1<<9)
1495 #define AAC_OPT_SGMAP_HOST64            cpu_to_le32(1<<10)
1496 #define AAC_OPT_ALARM                   cpu_to_le32(1<<11)
1497 #define AAC_OPT_NONDASD                 cpu_to_le32(1<<12)
1498 #define AAC_OPT_SCSI_MANAGED            cpu_to_le32(1<<13)
1499 #define AAC_OPT_RAID_SCSI_MODE          cpu_to_le32(1<<14)
1500 #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16)
1501 #define AAC_OPT_NEW_COMM                cpu_to_le32(1<<17)
1502 #define AAC_OPT_NEW_COMM_64             cpu_to_le32(1<<18)
1503 #define AAC_OPT_EXTENDED                cpu_to_le32(1<<23)
1504 #define AAC_OPT_NATIVE_HBA              cpu_to_le32(1<<25)
1505 #define AAC_OPT_NEW_COMM_TYPE1          cpu_to_le32(1<<28)
1506 #define AAC_OPT_NEW_COMM_TYPE2          cpu_to_le32(1<<29)
1507 #define AAC_OPT_NEW_COMM_TYPE3          cpu_to_le32(1<<30)
1508 #define AAC_OPT_NEW_COMM_TYPE4          cpu_to_le32(1<<31)
1509
1510 #define AAC_COMM_PRODUCER               0
1511 #define AAC_COMM_MESSAGE                1
1512 #define AAC_COMM_MESSAGE_TYPE1          3
1513 #define AAC_COMM_MESSAGE_TYPE2          4
1514 #define AAC_COMM_MESSAGE_TYPE3          5
1515
1516 #define AAC_EXTOPT_SA_FIRMWARE          cpu_to_le32(1<<1)
1517 #define AAC_EXTOPT_SOFT_RESET           cpu_to_le32(1<<16)
1518
1519 /* MSIX context */
1520 struct aac_msix_ctx {
1521         int             vector_no;
1522         struct aac_dev  *dev;
1523 };
1524
1525 struct aac_dev
1526 {
1527         struct list_head        entry;
1528         const char              *name;
1529         int                     id;
1530
1531         /*
1532          *      negotiated FIB settings
1533          */
1534         unsigned int            max_fib_size;
1535         unsigned int            sg_tablesize;
1536         unsigned int            max_num_aif;
1537
1538         unsigned int            max_cmd_size;   /* max_fib_size or MAX_NATIVE */
1539
1540         /*
1541          *      Map for 128 fib objects (64k)
1542          */
1543         dma_addr_t              hw_fib_pa;      /* also used for native cmd */
1544         struct hw_fib           *hw_fib_va;     /* also used for native cmd */
1545         struct hw_fib           *aif_base_va;
1546         /*
1547          *      Fib Headers
1548          */
1549         struct fib              *fibs;
1550
1551         struct fib              *free_fib;
1552         spinlock_t              fib_lock;
1553
1554         struct mutex            ioctl_mutex;
1555         struct mutex            scan_mutex;
1556         struct aac_queue_block *queues;
1557         /*
1558          *      The user API will use an IOCTL to register itself to receive
1559          *      FIBs from the adapter.  The following list is used to keep
1560          *      track of all the threads that have requested these FIBs.  The
1561          *      mutex is used to synchronize access to all data associated
1562          *      with the adapter fibs.
1563          */
1564         struct list_head        fib_list;
1565
1566         struct adapter_ops      a_ops;
1567         unsigned long           fsrev;          /* Main driver's revision number */
1568
1569         resource_size_t         base_start;     /* main IO base */
1570         resource_size_t         dbg_base;       /* address of UART
1571                                                  * debug buffer */
1572
1573         resource_size_t         base_size, dbg_size;    /* Size of
1574                                                          *  mapped in region */
1575         /*
1576          * Holds initialization info
1577          * to communicate with adapter
1578          */
1579         union aac_init          *init;
1580         dma_addr_t              init_pa;        /* Holds physical address of the init struct */
1581         /* response queue (if AAC_COMM_MESSAGE_TYPE1) */
1582         __le32                  *host_rrq;
1583         dma_addr_t              host_rrq_pa;    /* phys. address */
1584         /* index into rrq buffer */
1585         u32                     host_rrq_idx[AAC_MAX_MSIX];
1586         atomic_t                rrq_outstanding[AAC_MAX_MSIX];
1587         u32                     fibs_pushed_no;
1588         struct pci_dev          *pdev;          /* Our PCI interface */
1589         /* pointer to buffer used for printf's from the adapter */
1590         void                    *printfbuf;
1591         void                    *comm_addr;     /* Base address of Comm area */
1592         dma_addr_t              comm_phys;      /* Physical Address of Comm area */
1593         size_t                  comm_size;
1594
1595         struct Scsi_Host        *scsi_host_ptr;
1596         int                     maximum_num_containers;
1597         int                     maximum_num_physicals;
1598         int                     maximum_num_channels;
1599         struct fsa_dev_info     *fsa_dev;
1600         struct task_struct      *thread;
1601         struct delayed_work     safw_rescan_work;
1602         struct delayed_work     src_reinit_aif_worker;
1603         int                     cardtype;
1604         /*
1605          *This lock will protect the two 32-bit
1606          *writes to the Inbound Queue
1607          */
1608         spinlock_t              iq_lock;
1609
1610         /*
1611          *      The following is the device specific extension.
1612          */
1613 #ifndef AAC_MIN_FOOTPRINT_SIZE
1614 #       define AAC_MIN_FOOTPRINT_SIZE 8192
1615 #       define AAC_MIN_SRC_BAR0_SIZE 0x400000
1616 #       define AAC_MIN_SRC_BAR1_SIZE 0x800
1617 #       define AAC_MIN_SRCV_BAR0_SIZE 0x100000
1618 #       define AAC_MIN_SRCV_BAR1_SIZE 0x400
1619 #endif
1620         union
1621         {
1622                 struct sa_registers __iomem *sa;
1623                 struct rx_registers __iomem *rx;
1624                 struct rkt_registers __iomem *rkt;
1625                 struct {
1626                         struct src_registers __iomem *bar0;
1627                         char __iomem *bar1;
1628                 } src;
1629         } regs;
1630         volatile void __iomem *base, *dbg_base_mapped;
1631         volatile struct rx_inbound __iomem *IndexRegs;
1632         u32                     OIMR; /* Mask Register Cache */
1633         /*
1634          *      AIF thread states
1635          */
1636         u32                     aif_thread;
1637         struct aac_adapter_info adapter_info;
1638         struct aac_supplement_adapter_info supplement_adapter_info;
1639         /* These are in adapter info but they are in the io flow so
1640          * lets break them out so we don't have to do an AND to check them
1641          */
1642         u8                      nondasd_support;
1643         u8                      jbod;
1644         u8                      cache_protected;
1645         u8                      dac_support;
1646         u8                      needs_dac;
1647         u8                      raid_scsi_mode;
1648         u8                      comm_interface;
1649         u8                      raw_io_interface;
1650         u8                      raw_io_64;
1651         u8                      printf_enabled;
1652         u8                      in_reset;
1653         u8                      in_soft_reset;
1654         u8                      msi;
1655         u8                      sa_firmware;
1656         int                     management_fib_count;
1657         spinlock_t              manage_lock;
1658         spinlock_t              sync_lock;
1659         int                     sync_mode;
1660         struct fib              *sync_fib;
1661         struct list_head        sync_fib_list;
1662         u32                     doorbell_mask;
1663         u32                     max_msix;       /* max. MSI-X vectors */
1664         u32                     vector_cap;     /* MSI-X vector capab.*/
1665         int                     msi_enabled;    /* MSI/MSI-X enabled */
1666         atomic_t                msix_counter;
1667         u32                     scan_counter;
1668         struct msix_entry       msixentry[AAC_MAX_MSIX];
1669         struct aac_msix_ctx     aac_msix[AAC_MAX_MSIX]; /* context */
1670         struct aac_hba_map_info hba_map[AAC_MAX_BUSES][AAC_MAX_TARGETS];
1671         struct aac_ciss_phys_luns_resp *safw_phys_luns;
1672         u8                      adapter_shutdown;
1673         u32                     handle_pci_error;
1674         bool                    init_reset;
1675         u8                      soft_reset_support;
1676 };
1677
1678 #define aac_adapter_interrupt(dev) \
1679         (dev)->a_ops.adapter_interrupt(dev)
1680
1681 #define aac_adapter_notify(dev, event) \
1682         (dev)->a_ops.adapter_notify(dev, event)
1683
1684 #define aac_adapter_disable_int(dev) \
1685         (dev)->a_ops.adapter_disable_int(dev)
1686
1687 #define aac_adapter_enable_int(dev) \
1688         (dev)->a_ops.adapter_enable_int(dev)
1689
1690 #define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
1691         (dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
1692
1693 #define aac_adapter_restart(dev, bled, reset_type) \
1694         ((dev)->a_ops.adapter_restart(dev, bled, reset_type))
1695
1696 #define aac_adapter_start(dev) \
1697         ((dev)->a_ops.adapter_start(dev))
1698
1699 #define aac_adapter_ioremap(dev, size) \
1700         (dev)->a_ops.adapter_ioremap(dev, size)
1701
1702 #define aac_adapter_deliver(fib) \
1703         ((fib)->dev)->a_ops.adapter_deliver(fib)
1704
1705 #define aac_adapter_bounds(dev,cmd,lba) \
1706         dev->a_ops.adapter_bounds(dev,cmd,lba)
1707
1708 #define aac_adapter_read(fib,cmd,lba,count) \
1709         ((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count)
1710
1711 #define aac_adapter_write(fib,cmd,lba,count,fua) \
1712         ((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count,fua)
1713
1714 #define aac_adapter_scsi(fib,cmd) \
1715         ((fib)->dev)->a_ops.adapter_scsi(fib,cmd)
1716
1717 #define aac_adapter_comm(dev,comm) \
1718         (dev)->a_ops.adapter_comm(dev, comm)
1719
1720 #define FIB_CONTEXT_FLAG_TIMED_OUT              (0x00000001)
1721 #define FIB_CONTEXT_FLAG                        (0x00000002)
1722 #define FIB_CONTEXT_FLAG_WAIT                   (0x00000004)
1723 #define FIB_CONTEXT_FLAG_FASTRESP               (0x00000008)
1724 #define FIB_CONTEXT_FLAG_NATIVE_HBA             (0x00000010)
1725 #define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF (0x00000020)
1726 #define FIB_CONTEXT_FLAG_SCSI_CMD       (0x00000040)
1727 #define FIB_CONTEXT_FLAG_EH_RESET       (0x00000080)
1728
1729 /*
1730  *      Define the command values
1731  */
1732
1733 #define         Null                    0
1734 #define         GetAttributes           1
1735 #define         SetAttributes           2
1736 #define         Lookup                  3
1737 #define         ReadLink                4
1738 #define         Read                    5
1739 #define         Write                   6
1740 #define         Create                  7
1741 #define         MakeDirectory           8
1742 #define         SymbolicLink            9
1743 #define         MakeNode                10
1744 #define         Removex                 11
1745 #define         RemoveDirectoryx        12
1746 #define         Rename                  13
1747 #define         Link                    14
1748 #define         ReadDirectory           15
1749 #define         ReadDirectoryPlus       16
1750 #define         FileSystemStatus        17
1751 #define         FileSystemInfo          18
1752 #define         PathConfigure           19
1753 #define         Commit                  20
1754 #define         Mount                   21
1755 #define         UnMount                 22
1756 #define         Newfs                   23
1757 #define         FsCheck                 24
1758 #define         FsSync                  25
1759 #define         SimReadWrite            26
1760 #define         SetFileSystemStatus     27
1761 #define         BlockRead               28
1762 #define         BlockWrite              29
1763 #define         NvramIoctl              30
1764 #define         FsSyncWait              31
1765 #define         ClearArchiveBit         32
1766 #define         SetAcl                  33
1767 #define         GetAcl                  34
1768 #define         AssignAcl               35
1769 #define         FaultInsertion          36      /* Fault Insertion Command */
1770 #define         CrazyCache              37      /* Crazycache */
1771
1772 #define         MAX_FSACOMMAND_NUM      38
1773
1774
1775 /*
1776  *      Define the status returns. These are very unixlike although
1777  *      most are not in fact used
1778  */
1779
1780 #define         ST_OK           0
1781 #define         ST_PERM         1
1782 #define         ST_NOENT        2
1783 #define         ST_IO           5
1784 #define         ST_NXIO         6
1785 #define         ST_E2BIG        7
1786 #define         ST_MEDERR       8
1787 #define         ST_ACCES        13
1788 #define         ST_EXIST        17
1789 #define         ST_XDEV         18
1790 #define         ST_NODEV        19
1791 #define         ST_NOTDIR       20
1792 #define         ST_ISDIR        21
1793 #define         ST_INVAL        22
1794 #define         ST_FBIG         27
1795 #define         ST_NOSPC        28
1796 #define         ST_ROFS         30
1797 #define         ST_MLINK        31
1798 #define         ST_WOULDBLOCK   35
1799 #define         ST_NAMETOOLONG  63
1800 #define         ST_NOTEMPTY     66
1801 #define         ST_DQUOT        69
1802 #define         ST_STALE        70
1803 #define         ST_REMOTE       71
1804 #define         ST_NOT_READY    72
1805 #define         ST_BADHANDLE    10001
1806 #define         ST_NOT_SYNC     10002
1807 #define         ST_BAD_COOKIE   10003
1808 #define         ST_NOTSUPP      10004
1809 #define         ST_TOOSMALL     10005
1810 #define         ST_SERVERFAULT  10006
1811 #define         ST_BADTYPE      10007
1812 #define         ST_JUKEBOX      10008
1813 #define         ST_NOTMOUNTED   10009
1814 #define         ST_MAINTMODE    10010
1815 #define         ST_STALEACL     10011
1816
1817 /*
1818  *      On writes how does the client want the data written.
1819  */
1820
1821 #define CACHE_CSTABLE           1
1822 #define CACHE_UNSTABLE          2
1823
1824 /*
1825  *      Lets the client know at which level the data was committed on
1826  *      a write request
1827  */
1828
1829 #define CMFILE_SYNCH_NVRAM      1
1830 #define CMDATA_SYNCH_NVRAM      2
1831 #define CMFILE_SYNCH            3
1832 #define CMDATA_SYNCH            4
1833 #define CMUNSTABLE              5
1834
1835 #define RIO_TYPE_WRITE                  0x0000
1836 #define RIO_TYPE_READ                   0x0001
1837 #define RIO_SUREWRITE                   0x0008
1838
1839 #define RIO2_IO_TYPE                    0x0003
1840 #define RIO2_IO_TYPE_WRITE              0x0000
1841 #define RIO2_IO_TYPE_READ               0x0001
1842 #define RIO2_IO_TYPE_VERIFY             0x0002
1843 #define RIO2_IO_ERROR                   0x0004
1844 #define RIO2_IO_SUREWRITE               0x0008
1845 #define RIO2_SGL_CONFORMANT             0x0010
1846 #define RIO2_SG_FORMAT                  0xF000
1847 #define RIO2_SG_FORMAT_ARC              0x0000
1848 #define RIO2_SG_FORMAT_SRL              0x1000
1849 #define RIO2_SG_FORMAT_IEEE1212         0x2000
1850
1851 struct aac_read
1852 {
1853         __le32          command;
1854         __le32          cid;
1855         __le32          block;
1856         __le32          count;
1857         struct sgmap    sg;     // Must be last in struct because it is variable
1858 };
1859
1860 struct aac_read64
1861 {
1862         __le32          command;
1863         __le16          cid;
1864         __le16          sector_count;
1865         __le32          block;
1866         __le16          pad;
1867         __le16          flags;
1868         struct sgmap64  sg;     // Must be last in struct because it is variable
1869 };
1870
1871 struct aac_read_reply
1872 {
1873         __le32          status;
1874         __le32          count;
1875 };
1876
1877 struct aac_write
1878 {
1879         __le32          command;
1880         __le32          cid;
1881         __le32          block;
1882         __le32          count;
1883         __le32          stable; // Not used
1884         struct sgmap    sg;     // Must be last in struct because it is variable
1885 };
1886
1887 struct aac_write64
1888 {
1889         __le32          command;
1890         __le16          cid;
1891         __le16          sector_count;
1892         __le32          block;
1893         __le16          pad;
1894         __le16          flags;
1895         struct sgmap64  sg;     // Must be last in struct because it is variable
1896 };
1897 struct aac_write_reply
1898 {
1899         __le32          status;
1900         __le32          count;
1901         __le32          committed;
1902 };
1903
1904 struct aac_raw_io
1905 {
1906         __le32          block[2];
1907         __le32          count;
1908         __le16          cid;
1909         __le16          flags;          /* 00 W, 01 R */
1910         __le16          bpTotal;        /* reserved for F/W use */
1911         __le16          bpComplete;     /* reserved for F/W use */
1912         struct sgmapraw sg;
1913 };
1914
1915 struct aac_raw_io2 {
1916         __le32          blockLow;
1917         __le32          blockHigh;
1918         __le32          byteCount;
1919         __le16          cid;
1920         __le16          flags;          /* RIO2 flags */
1921         __le32          sgeFirstSize;   /* size of first sge el. */
1922         __le32          sgeNominalSize; /* size of 2nd sge el. (if conformant) */
1923         u8              sgeCnt;         /* only 8 bits required */
1924         u8              bpTotal;        /* reserved for F/W use */
1925         u8              bpComplete;     /* reserved for F/W use */
1926         u8              sgeFirstIndex;  /* reserved for F/W use */
1927         u8              unused[4];
1928         struct sge_ieee1212     sge[];
1929 };
1930
1931 #define CT_FLUSH_CACHE 129
1932 struct aac_synchronize {
1933         __le32          command;        /* VM_ContainerConfig */
1934         __le32          type;           /* CT_FLUSH_CACHE */
1935         __le32          cid;
1936         __le32          parm1;
1937         __le32          parm2;
1938         __le32          parm3;
1939         __le32          parm4;
1940         __le32          count;  /* sizeof(((struct aac_synchronize_reply *)NULL)->data) */
1941 };
1942
1943 struct aac_synchronize_reply {
1944         __le32          dummy0;
1945         __le32          dummy1;
1946         __le32          status; /* CT_OK */
1947         __le32          parm1;
1948         __le32          parm2;
1949         __le32          parm3;
1950         __le32          parm4;
1951         __le32          parm5;
1952         u8              data[16];
1953 };
1954
1955 #define CT_POWER_MANAGEMENT     245
1956 #define CT_PM_START_UNIT        2
1957 #define CT_PM_STOP_UNIT         3
1958 #define CT_PM_UNIT_IMMEDIATE    1
1959 struct aac_power_management {
1960         __le32          command;        /* VM_ContainerConfig */
1961         __le32          type;           /* CT_POWER_MANAGEMENT */
1962         __le32          sub;            /* CT_PM_* */
1963         __le32          cid;
1964         __le32          parm;           /* CT_PM_sub_* */
1965 };
1966
1967 #define CT_PAUSE_IO    65
1968 #define CT_RELEASE_IO  66
1969 struct aac_pause {
1970         __le32          command;        /* VM_ContainerConfig */
1971         __le32          type;           /* CT_PAUSE_IO */
1972         __le32          timeout;        /* 10ms ticks */
1973         __le32          min;
1974         __le32          noRescan;
1975         __le32          parm3;
1976         __le32          parm4;
1977         __le32          count;  /* sizeof(((struct aac_pause_reply *)NULL)->data) */
1978 };
1979
1980 struct aac_srb
1981 {
1982         __le32          function;
1983         __le32          channel;
1984         __le32          id;
1985         __le32          lun;
1986         __le32          timeout;
1987         __le32          flags;
1988         __le32          count;          // Data xfer size
1989         __le32          retry_limit;
1990         __le32          cdb_size;
1991         u8              cdb[16];
1992         struct  sgmap   sg;
1993 };
1994
1995 /*
1996  * This and associated data structs are used by the
1997  * ioctl caller and are in cpu order.
1998  */
1999 struct user_aac_srb
2000 {
2001         u32             function;
2002         u32             channel;
2003         u32             id;
2004         u32             lun;
2005         u32             timeout;
2006         u32             flags;
2007         u32             count;          // Data xfer size
2008         u32             retry_limit;
2009         u32             cdb_size;
2010         u8              cdb[16];
2011         struct  user_sgmap      sg;
2012 };
2013
2014 #define         AAC_SENSE_BUFFERSIZE     30
2015
2016 struct aac_srb_reply
2017 {
2018         __le32          status;
2019         __le32          srb_status;
2020         __le32          scsi_status;
2021         __le32          data_xfer_length;
2022         __le32          sense_data_size;
2023         u8              sense_data[AAC_SENSE_BUFFERSIZE]; // Can this be SCSI_SENSE_BUFFERSIZE
2024 };
2025
2026 struct aac_srb_unit {
2027         struct aac_srb_reply    srb_reply;
2028         struct aac_srb          srb;
2029 };
2030
2031 /*
2032  * SRB Flags
2033  */
2034 #define         SRB_NoDataXfer           0x0000
2035 #define         SRB_DisableDisconnect    0x0004
2036 #define         SRB_DisableSynchTransfer 0x0008
2037 #define         SRB_BypassFrozenQueue    0x0010
2038 #define         SRB_DisableAutosense     0x0020
2039 #define         SRB_DataIn               0x0040
2040 #define         SRB_DataOut              0x0080
2041
2042 /*
2043  * SRB Functions - set in aac_srb->function
2044  */
2045 #define SRBF_ExecuteScsi        0x0000
2046 #define SRBF_ClaimDevice        0x0001
2047 #define SRBF_IO_Control         0x0002
2048 #define SRBF_ReceiveEvent       0x0003
2049 #define SRBF_ReleaseQueue       0x0004
2050 #define SRBF_AttachDevice       0x0005
2051 #define SRBF_ReleaseDevice      0x0006
2052 #define SRBF_Shutdown           0x0007
2053 #define SRBF_Flush              0x0008
2054 #define SRBF_AbortCommand       0x0010
2055 #define SRBF_ReleaseRecovery    0x0011
2056 #define SRBF_ResetBus           0x0012
2057 #define SRBF_ResetDevice        0x0013
2058 #define SRBF_TerminateIO        0x0014
2059 #define SRBF_FlushQueue         0x0015
2060 #define SRBF_RemoveDevice       0x0016
2061 #define SRBF_DomainValidation   0x0017
2062
2063 /*
2064  * SRB SCSI Status - set in aac_srb->scsi_status
2065  */
2066 #define SRB_STATUS_PENDING                  0x00
2067 #define SRB_STATUS_SUCCESS                  0x01
2068 #define SRB_STATUS_ABORTED                  0x02
2069 #define SRB_STATUS_ABORT_FAILED             0x03
2070 #define SRB_STATUS_ERROR                    0x04
2071 #define SRB_STATUS_BUSY                     0x05
2072 #define SRB_STATUS_INVALID_REQUEST          0x06
2073 #define SRB_STATUS_INVALID_PATH_ID          0x07
2074 #define SRB_STATUS_NO_DEVICE                0x08
2075 #define SRB_STATUS_TIMEOUT                  0x09
2076 #define SRB_STATUS_SELECTION_TIMEOUT        0x0A
2077 #define SRB_STATUS_COMMAND_TIMEOUT          0x0B
2078 #define SRB_STATUS_MESSAGE_REJECTED         0x0D
2079 #define SRB_STATUS_BUS_RESET                0x0E
2080 #define SRB_STATUS_PARITY_ERROR             0x0F
2081 #define SRB_STATUS_REQUEST_SENSE_FAILED     0x10
2082 #define SRB_STATUS_NO_HBA                   0x11
2083 #define SRB_STATUS_DATA_OVERRUN             0x12
2084 #define SRB_STATUS_UNEXPECTED_BUS_FREE      0x13
2085 #define SRB_STATUS_PHASE_SEQUENCE_FAILURE   0x14
2086 #define SRB_STATUS_BAD_SRB_BLOCK_LENGTH     0x15
2087 #define SRB_STATUS_REQUEST_FLUSHED          0x16
2088 #define SRB_STATUS_DELAYED_RETRY            0x17
2089 #define SRB_STATUS_INVALID_LUN              0x20
2090 #define SRB_STATUS_INVALID_TARGET_ID        0x21
2091 #define SRB_STATUS_BAD_FUNCTION             0x22
2092 #define SRB_STATUS_ERROR_RECOVERY           0x23
2093 #define SRB_STATUS_NOT_STARTED              0x24
2094 #define SRB_STATUS_NOT_IN_USE               0x30
2095 #define SRB_STATUS_FORCE_ABORT              0x31
2096 #define SRB_STATUS_DOMAIN_VALIDATION_FAIL   0x32
2097
2098 /*
2099  * Object-Server / Volume-Manager Dispatch Classes
2100  */
2101
2102 #define         VM_Null                 0
2103 #define         VM_NameServe            1
2104 #define         VM_ContainerConfig      2
2105 #define         VM_Ioctl                3
2106 #define         VM_FilesystemIoctl      4
2107 #define         VM_CloseAll             5
2108 #define         VM_CtBlockRead          6
2109 #define         VM_CtBlockWrite         7
2110 #define         VM_SliceBlockRead       8       /* raw access to configured "storage objects" */
2111 #define         VM_SliceBlockWrite      9
2112 #define         VM_DriveBlockRead       10      /* raw access to physical devices */
2113 #define         VM_DriveBlockWrite      11
2114 #define         VM_EnclosureMgt         12      /* enclosure management */
2115 #define         VM_Unused               13      /* used to be diskset management */
2116 #define         VM_CtBlockVerify        14
2117 #define         VM_CtPerf               15      /* performance test */
2118 #define         VM_CtBlockRead64        16
2119 #define         VM_CtBlockWrite64       17
2120 #define         VM_CtBlockVerify64      18
2121 #define         VM_CtHostRead64         19
2122 #define         VM_CtHostWrite64        20
2123 #define         VM_DrvErrTblLog         21
2124 #define         VM_NameServe64          22
2125 #define         VM_NameServeAllBlk      30
2126
2127 #define         MAX_VMCOMMAND_NUM       23      /* used for sizing stats array - leave last */
2128
2129 /*
2130  *      Descriptive information (eg, vital stats)
2131  *      that a content manager might report.  The
2132  *      FileArray filesystem component is one example
2133  *      of a content manager.  Raw mode might be
2134  *      another.
2135  */
2136
2137 struct aac_fsinfo {
2138         __le32  fsTotalSize;    /* Consumed by fs, incl. metadata */
2139         __le32  fsBlockSize;
2140         __le32  fsFragSize;
2141         __le32  fsMaxExtendSize;
2142         __le32  fsSpaceUnits;
2143         __le32  fsMaxNumFiles;
2144         __le32  fsNumFreeFiles;
2145         __le32  fsInodeDensity;
2146 };      /* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */
2147
2148 struct  aac_blockdevinfo {
2149         __le32  block_size;
2150         __le32  logical_phys_map;
2151         u8      identifier[16];
2152 };
2153
2154 union aac_contentinfo {
2155         struct  aac_fsinfo              filesys;
2156         struct  aac_blockdevinfo        bdevinfo;
2157 };
2158
2159 /*
2160  *      Query for Container Configuration Status
2161  */
2162
2163 #define CT_GET_CONFIG_STATUS 147
2164 struct aac_get_config_status {
2165         __le32          command;        /* VM_ContainerConfig */
2166         __le32          type;           /* CT_GET_CONFIG_STATUS */
2167         __le32          parm1;
2168         __le32          parm2;
2169         __le32          parm3;
2170         __le32          parm4;
2171         __le32          parm5;
2172         __le32          count;  /* sizeof(((struct aac_get_config_status_resp *)NULL)->data) */
2173 };
2174
2175 #define CFACT_CONTINUE 0
2176 #define CFACT_PAUSE    1
2177 #define CFACT_ABORT    2
2178 struct aac_get_config_status_resp {
2179         __le32          response; /* ST_OK */
2180         __le32          dummy0;
2181         __le32          status; /* CT_OK */
2182         __le32          parm1;
2183         __le32          parm2;
2184         __le32          parm3;
2185         __le32          parm4;
2186         __le32          parm5;
2187         struct {
2188                 __le32  action; /* CFACT_CONTINUE, CFACT_PAUSE or CFACT_ABORT */
2189                 __le16  flags;
2190                 __le16  count;
2191         }               data;
2192 };
2193
2194 /*
2195  *      Accept the configuration as-is
2196  */
2197
2198 #define CT_COMMIT_CONFIG 152
2199
2200 struct aac_commit_config {
2201         __le32          command;        /* VM_ContainerConfig */
2202         __le32          type;           /* CT_COMMIT_CONFIG */
2203 };
2204
2205 /*
2206  *      Query for Container Configuration Status
2207  */
2208
2209 #define CT_GET_CONTAINER_COUNT 4
2210 struct aac_get_container_count {
2211         __le32          command;        /* VM_ContainerConfig */
2212         __le32          type;           /* CT_GET_CONTAINER_COUNT */
2213 };
2214
2215 struct aac_get_container_count_resp {
2216         __le32          response; /* ST_OK */
2217         __le32          dummy0;
2218         __le32          MaxContainers;
2219         __le32          ContainerSwitchEntries;
2220         __le32          MaxPartitions;
2221         __le32          MaxSimpleVolumes;
2222 };
2223
2224
2225 /*
2226  *      Query for "mountable" objects, ie, objects that are typically
2227  *      associated with a drive letter on the client (host) side.
2228  */
2229
2230 struct aac_mntent {
2231         __le32                  oid;
2232         u8                      name[16];       /* if applicable */
2233         struct creation_info    create_info;    /* if applicable */
2234         __le32                  capacity;
2235         __le32                  vol;            /* substrate structure */
2236         __le32                  obj;            /* FT_FILESYS, etc. */
2237         __le32                  state;          /* unready for mounting,
2238                                                    readonly, etc. */
2239         union aac_contentinfo   fileinfo;       /* Info specific to content
2240                                                    manager (eg, filesystem) */
2241         __le32                  altoid;         /* != oid <==> snapshot or
2242                                                    broken mirror exists */
2243         __le32                  capacityhigh;
2244 };
2245
2246 #define FSCS_NOTCLEAN   0x0001  /* fsck is necessary before mounting */
2247 #define FSCS_READONLY   0x0002  /* possible result of broken mirror */
2248 #define FSCS_HIDDEN     0x0004  /* should be ignored - set during a clear */
2249 #define FSCS_NOT_READY  0x0008  /* Array spinning up to fulfil request */
2250
2251 struct aac_query_mount {
2252         __le32          command;
2253         __le32          type;
2254         __le32          count;
2255 };
2256
2257 struct aac_mount {
2258         __le32          status;
2259         __le32          type;           /* should be same as that requested */
2260         __le32          count;
2261         struct aac_mntent mnt[1];
2262 };
2263
2264 #define CT_READ_NAME 130
2265 struct aac_get_name {
2266         __le32          command;        /* VM_ContainerConfig */
2267         __le32          type;           /* CT_READ_NAME */
2268         __le32          cid;
2269         __le32          parm1;
2270         __le32          parm2;
2271         __le32          parm3;
2272         __le32          parm4;
2273         __le32          count;  /* sizeof(((struct aac_get_name_resp *)NULL)->data) */
2274 };
2275
2276 struct aac_get_name_resp {
2277         __le32          dummy0;
2278         __le32          dummy1;
2279         __le32          status; /* CT_OK */
2280         __le32          parm1;
2281         __le32          parm2;
2282         __le32          parm3;
2283         __le32          parm4;
2284         __le32          parm5;
2285         u8              data[17];
2286 };
2287
2288 #define CT_CID_TO_32BITS_UID 165
2289 struct aac_get_serial {
2290         __le32          command;        /* VM_ContainerConfig */
2291         __le32          type;           /* CT_CID_TO_32BITS_UID */
2292         __le32          cid;
2293 };
2294
2295 struct aac_get_serial_resp {
2296         __le32          dummy0;
2297         __le32          dummy1;
2298         __le32          status; /* CT_OK */
2299         __le32          uid;
2300 };
2301
2302 /*
2303  * The following command is sent to shut down each container.
2304  */
2305
2306 struct aac_close {
2307         __le32  command;
2308         __le32  cid;
2309 };
2310
2311 struct aac_query_disk
2312 {
2313         s32     cnum;
2314         s32     bus;
2315         s32     id;
2316         s32     lun;
2317         u32     valid;
2318         u32     locked;
2319         u32     deleted;
2320         s32     instance;
2321         s8      name[10];
2322         u32     unmapped;
2323 };
2324
2325 struct aac_delete_disk {
2326         u32     disknum;
2327         u32     cnum;
2328 };
2329
2330 struct fib_ioctl
2331 {
2332         u32     fibctx;
2333         s32     wait;
2334         char    __user *fib;
2335 };
2336
2337 struct revision
2338 {
2339         u32 compat;
2340         __le32 version;
2341         __le32 build;
2342 };
2343
2344
2345 /*
2346  *      Ugly - non Linux like ioctl coding for back compat.
2347  */
2348
2349 #define CTL_CODE(function, method) (                 \
2350     (4<< 16) | ((function) << 2) | (method) \
2351 )
2352
2353 /*
2354  *      Define the method codes for how buffers are passed for I/O and FS
2355  *      controls
2356  */
2357
2358 #define METHOD_BUFFERED                 0
2359 #define METHOD_NEITHER                  3
2360
2361 /*
2362  *      Filesystem ioctls
2363  */
2364
2365 #define FSACTL_SENDFIB                          CTL_CODE(2050, METHOD_BUFFERED)
2366 #define FSACTL_SEND_RAW_SRB                     CTL_CODE(2067, METHOD_BUFFERED)
2367 #define FSACTL_DELETE_DISK                      0x163
2368 #define FSACTL_QUERY_DISK                       0x173
2369 #define FSACTL_OPEN_GET_ADAPTER_FIB             CTL_CODE(2100, METHOD_BUFFERED)
2370 #define FSACTL_GET_NEXT_ADAPTER_FIB             CTL_CODE(2101, METHOD_BUFFERED)
2371 #define FSACTL_CLOSE_GET_ADAPTER_FIB            CTL_CODE(2102, METHOD_BUFFERED)
2372 #define FSACTL_MINIPORT_REV_CHECK               CTL_CODE(2107, METHOD_BUFFERED)
2373 #define FSACTL_GET_PCI_INFO                     CTL_CODE(2119, METHOD_BUFFERED)
2374 #define FSACTL_FORCE_DELETE_DISK                CTL_CODE(2120, METHOD_NEITHER)
2375 #define FSACTL_GET_CONTAINERS                   2131
2376 #define FSACTL_SEND_LARGE_FIB                   CTL_CODE(2138, METHOD_BUFFERED)
2377 #define FSACTL_RESET_IOP                        CTL_CODE(2140, METHOD_BUFFERED)
2378 #define FSACTL_GET_HBA_INFO                     CTL_CODE(2150, METHOD_BUFFERED)
2379 /* flags defined for IOP & HW SOFT RESET */
2380 #define HW_IOP_RESET                            0x01
2381 #define HW_SOFT_RESET                           0x02
2382 #define IOP_HWSOFT_RESET                        (HW_IOP_RESET | HW_SOFT_RESET)
2383 /* HW Soft Reset register offset */
2384 #define IBW_SWR_OFFSET                          0x4000
2385 #define SOFT_RESET_TIME                 60
2386
2387
2388
2389 struct aac_common
2390 {
2391         /*
2392          *      If this value is set to 1 then interrupt moderation will occur
2393          *      in the base commuication support.
2394          */
2395         u32 irq_mod;
2396         u32 peak_fibs;
2397         u32 zero_fibs;
2398         u32 fib_timeouts;
2399         /*
2400          *      Statistical counters in debug mode
2401          */
2402 #ifdef DBG
2403         u32 FibsSent;
2404         u32 FibRecved;
2405         u32 NativeSent;
2406         u32 NativeRecved;
2407         u32 NoResponseSent;
2408         u32 NoResponseRecved;
2409         u32 AsyncSent;
2410         u32 AsyncRecved;
2411         u32 NormalSent;
2412         u32 NormalRecved;
2413 #endif
2414 };
2415
2416 extern struct aac_common aac_config;
2417
2418 /*
2419  * This is for management ioctl purpose only.
2420  */
2421 struct aac_hba_info {
2422
2423         u8      driver_name[50];
2424         u8      adapter_number;
2425         u8      system_io_bus_number;
2426         u8      device_number;
2427         u32     function_number;
2428         u32     vendor_id;
2429         u32     device_id;
2430         u32     sub_vendor_id;
2431         u32     sub_system_id;
2432         u32     mapped_base_address_size;
2433         u32     base_physical_address_high_part;
2434         u32     base_physical_address_low_part;
2435
2436         u32     max_command_size;
2437         u32     max_fib_size;
2438         u32     max_scatter_gather_from_os;
2439         u32     max_scatter_gather_to_fw;
2440         u32     max_outstanding_fibs;
2441
2442         u32     queue_start_threshold;
2443         u32     queue_dump_threshold;
2444         u32     max_io_size_queued;
2445         u32     outstanding_io;
2446
2447         u32     firmware_build_number;
2448         u32     bios_build_number;
2449         u32     driver_build_number;
2450         u32     serial_number_high_part;
2451         u32     serial_number_low_part;
2452         u32     supported_options;
2453         u32     feature_bits;
2454         u32     currentnumber_ports;
2455
2456         u8      new_comm_interface:1;
2457         u8      new_commands_supported:1;
2458         u8      disable_passthrough:1;
2459         u8      expose_non_dasd:1;
2460         u8      queue_allowed:1;
2461         u8      bled_check_enabled:1;
2462         u8      reserved1:1;
2463         u8      reserted2:1;
2464
2465         u32     reserved3[10];
2466
2467 };
2468
2469 /*
2470  *      The following macro is used when sending and receiving FIBs. It is
2471  *      only used for debugging.
2472  */
2473
2474 #ifdef DBG
2475 #define FIB_COUNTER_INCREMENT(counter)          (counter)++
2476 #else
2477 #define FIB_COUNTER_INCREMENT(counter)
2478 #endif
2479
2480 /*
2481  *      Adapter direct commands
2482  *      Monitor/Kernel API
2483  */
2484
2485 #define BREAKPOINT_REQUEST              0x00000004
2486 #define INIT_STRUCT_BASE_ADDRESS        0x00000005
2487 #define READ_PERMANENT_PARAMETERS       0x0000000a
2488 #define WRITE_PERMANENT_PARAMETERS      0x0000000b
2489 #define HOST_CRASHING                   0x0000000d
2490 #define SEND_SYNCHRONOUS_FIB            0x0000000c
2491 #define COMMAND_POST_RESULTS            0x00000014
2492 #define GET_ADAPTER_PROPERTIES          0x00000019
2493 #define GET_DRIVER_BUFFER_PROPERTIES    0x00000023
2494 #define RCV_TEMP_READINGS               0x00000025
2495 #define GET_COMM_PREFERRED_SETTINGS     0x00000026
2496 #define IOP_RESET_FW_FIB_DUMP           0x00000034
2497 #define DROP_IO                 0x00000035
2498 #define IOP_RESET                       0x00001000
2499 #define IOP_RESET_ALWAYS                0x00001001
2500 #define RE_INIT_ADAPTER         0x000000ee
2501
2502 #define IOP_SRC_RESET_MASK              0x00000100
2503
2504 /*
2505  *      Adapter Status Register
2506  *
2507  *  Phase Staus mailbox is 32bits:
2508  *      <31:16> = Phase Status
2509  *      <15:0>  = Phase
2510  *
2511  *      The adapter reports is present state through the phase.  Only
2512  *      a single phase should be ever be set.  Each phase can have multiple
2513  *      phase status bits to provide more detailed information about the
2514  *      state of the board.  Care should be taken to ensure that any phase
2515  *      status bits that are set when changing the phase are also valid
2516  *      for the new phase or be cleared out.  Adapter software (monitor,
2517  *      iflash, kernel) is responsible for properly maintining the phase
2518  *      status mailbox when it is running.
2519  *
2520  *      MONKER_API Phases
2521  *
2522  *      Phases are bit oriented.  It is NOT valid  to have multiple bits set
2523  */
2524
2525 #define SELF_TEST_FAILED                0x00000004
2526 #define MONITOR_PANIC                   0x00000020
2527 #define KERNEL_BOOTING                  0x00000040
2528 #define KERNEL_UP_AND_RUNNING           0x00000080
2529 #define KERNEL_PANIC                    0x00000100
2530 #define FLASH_UPD_PENDING               0x00002000
2531 #define FLASH_UPD_SUCCESS               0x00004000
2532 #define FLASH_UPD_FAILED                0x00008000
2533 #define INVALID_OMR                     0xffffffff
2534 #define FWUPD_TIMEOUT                   (5 * 60)
2535
2536 /*
2537  *      Doorbell bit defines
2538  */
2539
2540 #define DoorBellSyncCmdAvailable        (1<<0)  /* Host -> Adapter */
2541 #define DoorBellPrintfDone              (1<<5)  /* Host -> Adapter */
2542 #define DoorBellAdapterNormCmdReady     (1<<1)  /* Adapter -> Host */
2543 #define DoorBellAdapterNormRespReady    (1<<2)  /* Adapter -> Host */
2544 #define DoorBellAdapterNormCmdNotFull   (1<<3)  /* Adapter -> Host */
2545 #define DoorBellAdapterNormRespNotFull  (1<<4)  /* Adapter -> Host */
2546 #define DoorBellPrintfReady             (1<<5)  /* Adapter -> Host */
2547 #define DoorBellAifPending              (1<<6)  /* Adapter -> Host */
2548
2549 /* PMC specific outbound doorbell bits */
2550 #define PmDoorBellResponseSent          (1<<1)  /* Adapter -> Host */
2551
2552 /*
2553  *      For FIB communication, we need all of the following things
2554  *      to send back to the user.
2555  */
2556
2557 #define         AifCmdEventNotify       1       /* Notify of event */
2558 #define                 AifEnConfigChange       3       /* Adapter configuration change */
2559 #define                 AifEnContainerChange    4       /* Container configuration change */
2560 #define                 AifEnDeviceFailure      5       /* SCSI device failed */
2561 #define                 AifEnEnclosureManagement 13     /* EM_DRIVE_* */
2562 #define                         EM_DRIVE_INSERTION      31
2563 #define                         EM_DRIVE_REMOVAL        32
2564 #define                 EM_SES_DRIVE_INSERTION  33
2565 #define                 EM_SES_DRIVE_REMOVAL    26
2566 #define                 AifEnBatteryEvent       14      /* Change in Battery State */
2567 #define                 AifEnAddContainer       15      /* A new array was created */
2568 #define                 AifEnDeleteContainer    16      /* A container was deleted */
2569 #define                 AifEnExpEvent           23      /* Firmware Event Log */
2570 #define                 AifExeFirmwarePanic     3       /* Firmware Event Panic */
2571 #define                 AifHighPriority         3       /* Highest Priority Event */
2572 #define                 AifEnAddJBOD            30      /* JBOD created */
2573 #define                 AifEnDeleteJBOD         31      /* JBOD deleted */
2574
2575 #define                 AifBuManagerEvent               42 /* Bu management*/
2576 #define                 AifBuCacheDataLoss              10
2577 #define                 AifBuCacheDataRecover   11
2578
2579 #define         AifCmdJobProgress       2       /* Progress report */
2580 #define                 AifJobCtrZero   101     /* Array Zero progress */
2581 #define                 AifJobStsSuccess 1      /* Job completes */
2582 #define                 AifJobStsRunning 102    /* Job running */
2583 #define         AifCmdAPIReport         3       /* Report from other user of API */
2584 #define         AifCmdDriverNotify      4       /* Notify host driver of event */
2585 #define                 AifDenMorphComplete 200 /* A morph operation completed */
2586 #define                 AifDenVolumeExtendComplete 201 /* A volume extend completed */
2587 #define         AifReqJobList           100     /* Gets back complete job list */
2588 #define         AifReqJobsForCtr        101     /* Gets back jobs for specific container */
2589 #define         AifReqJobsForScsi       102     /* Gets back jobs for specific SCSI device */
2590 #define         AifReqJobReport         103     /* Gets back a specific job report or list of them */
2591 #define         AifReqTerminateJob      104     /* Terminates job */
2592 #define         AifReqSuspendJob        105     /* Suspends a job */
2593 #define         AifReqResumeJob         106     /* Resumes a job */
2594 #define         AifReqSendAPIReport     107     /* API generic report requests */
2595 #define         AifReqAPIJobStart       108     /* Start a job from the API */
2596 #define         AifReqAPIJobUpdate      109     /* Update a job report from the API */
2597 #define         AifReqAPIJobFinish      110     /* Finish a job from the API */
2598
2599 /* PMC NEW COMM: Request the event data */
2600 #define         AifReqEvent             200
2601 #define         AifRawDeviceRemove      203     /* RAW device deleted */
2602 #define         AifNativeDeviceAdd      204     /* native HBA device added */
2603 #define         AifNativeDeviceRemove   205     /* native HBA device removed */
2604
2605
2606 /*
2607  *      Adapter Initiated FIB command structures. Start with the adapter
2608  *      initiated FIBs that really come from the adapter, and get responded
2609  *      to by the host.
2610  */
2611
2612 struct aac_aifcmd {
2613         __le32 command;         /* Tell host what type of notify this is */
2614         __le32 seqnum;          /* To allow ordering of reports (if necessary) */
2615         u8 data[];              /* Undefined length (from kernel viewpoint) */
2616 };
2617
2618 /**
2619  *      Convert capacity to cylinders
2620  *      accounting for the fact capacity could be a 64 bit value
2621  *
2622  */
2623 static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
2624 {
2625         sector_div(capacity, divisor);
2626         return capacity;
2627 }
2628
2629 static inline int aac_pci_offline(struct aac_dev *dev)
2630 {
2631         return pci_channel_offline(dev->pdev) || dev->handle_pci_error;
2632 }
2633
2634 static inline int aac_adapter_check_health(struct aac_dev *dev)
2635 {
2636         if (unlikely(aac_pci_offline(dev)))
2637                 return -1;
2638
2639         return (dev)->a_ops.adapter_check_health(dev);
2640 }
2641
2642
2643 int aac_scan_host(struct aac_dev *dev);
2644
2645 static inline void aac_schedule_safw_scan_worker(struct aac_dev *dev)
2646 {
2647         schedule_delayed_work(&dev->safw_rescan_work, AAC_RESCAN_DELAY);
2648 }
2649
2650 static inline void aac_schedule_src_reinit_aif_worker(struct aac_dev *dev)
2651 {
2652         schedule_delayed_work(&dev->src_reinit_aif_worker, AAC_RESCAN_DELAY);
2653 }
2654
2655 static inline void aac_safw_rescan_worker(struct work_struct *work)
2656 {
2657         struct aac_dev *dev = container_of(to_delayed_work(work),
2658                 struct aac_dev, safw_rescan_work);
2659
2660         wait_event(dev->scsi_host_ptr->host_wait,
2661                 !scsi_host_in_recovery(dev->scsi_host_ptr));
2662
2663         aac_scan_host(dev);
2664 }
2665
2666 static inline void aac_cancel_rescan_worker(struct aac_dev *dev)
2667 {
2668         cancel_delayed_work_sync(&dev->safw_rescan_work);
2669         cancel_delayed_work_sync(&dev->src_reinit_aif_worker);
2670 }
2671
2672 enum aac_cmd_owner {
2673         AAC_OWNER_MIDLEVEL      = 0x101,
2674         AAC_OWNER_LOWLEVEL      = 0x102,
2675         AAC_OWNER_ERROR_HANDLER = 0x103,
2676         AAC_OWNER_FIRMWARE      = 0x106,
2677 };
2678
2679 struct aac_cmd_priv {
2680         int                     (*callback)(struct scsi_cmnd *);
2681         int                     status;
2682         enum aac_cmd_owner      owner;
2683         bool                    sent_command;
2684 };
2685
2686 static inline struct aac_cmd_priv *aac_priv(struct scsi_cmnd *cmd)
2687 {
2688         return scsi_cmd_priv(cmd);
2689 }
2690
2691 void aac_safw_rescan_worker(struct work_struct *work);
2692 void aac_src_reinit_aif_worker(struct work_struct *work);
2693 int aac_acquire_irq(struct aac_dev *dev);
2694 void aac_free_irq(struct aac_dev *dev);
2695 int aac_setup_safw_adapter(struct aac_dev *dev);
2696 const char *aac_driverinfo(struct Scsi_Host *);
2697 void aac_fib_vector_assign(struct aac_dev *dev);
2698 struct fib *aac_fib_alloc(struct aac_dev *dev);
2699 struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd);
2700 int aac_fib_setup(struct aac_dev *dev);
2701 void aac_fib_map_free(struct aac_dev *dev);
2702 void aac_fib_free(struct fib * context);
2703 void aac_fib_init(struct fib * context);
2704 void aac_printf(struct aac_dev *dev, u32 val);
2705 int aac_fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt);
2706 int aac_hba_send(u8 command, struct fib *context,
2707                 fib_callback callback, void *ctxt);
2708 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
2709 void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
2710 int aac_fib_complete(struct fib * context);
2711 void aac_hba_callback(void *context, struct fib *fibptr);
2712 #define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data)
2713 struct aac_dev *aac_init_adapter(struct aac_dev *dev);
2714 void aac_src_access_devreg(struct aac_dev *dev, int mode);
2715 void aac_set_intx_mode(struct aac_dev *dev);
2716 int aac_get_config_status(struct aac_dev *dev, int commit_flag);
2717 int aac_get_containers(struct aac_dev *dev);
2718 int aac_scsi_cmd(struct scsi_cmnd *cmd);
2719 int aac_dev_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg);
2720 #ifndef shost_to_class
2721 #define shost_to_class(shost) &shost->shost_dev
2722 #endif
2723 ssize_t aac_get_serial_number(struct device *dev, char *buf);
2724 int aac_do_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg);
2725 int aac_rx_init(struct aac_dev *dev);
2726 int aac_rkt_init(struct aac_dev *dev);
2727 int aac_nark_init(struct aac_dev *dev);
2728 int aac_sa_init(struct aac_dev *dev);
2729 int aac_src_init(struct aac_dev *dev);
2730 int aac_srcv_init(struct aac_dev *dev);
2731 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
2732 void aac_define_int_mode(struct aac_dev *dev);
2733 unsigned int aac_response_normal(struct aac_queue * q);
2734 unsigned int aac_command_normal(struct aac_queue * q);
2735 unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
2736                         int isAif, int isFastResponse,
2737                         struct hw_fib *aif_fib);
2738 int aac_reset_adapter(struct aac_dev *dev, int forced, u8 reset_type);
2739 int aac_command_thread(void *data);
2740 int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
2741 int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
2742 struct aac_driver_ident* aac_get_driver_ident(int devtype);
2743 int aac_get_adapter_info(struct aac_dev* dev);
2744 int aac_send_shutdown(struct aac_dev *dev);
2745 int aac_probe_container(struct aac_dev *dev, int cid);
2746 int _aac_rx_init(struct aac_dev *dev);
2747 int aac_rx_select_comm(struct aac_dev *dev, int comm);
2748 int aac_rx_deliver_producer(struct fib * fib);
2749 void aac_reinit_aif(struct aac_dev *aac, unsigned int index);
2750
2751 static inline int aac_is_src(struct aac_dev *dev)
2752 {
2753         u16 device = dev->pdev->device;
2754
2755         if (device == PMC_DEVICE_S6 ||
2756                 device == PMC_DEVICE_S7 ||
2757                 device == PMC_DEVICE_S8)
2758                 return 1;
2759         return 0;
2760 }
2761
2762 static inline int aac_supports_2T(struct aac_dev *dev)
2763 {
2764         return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64);
2765 }
2766
2767 char * get_container_type(unsigned type);
2768 extern int numacb;
2769 extern char aac_driver_version[];
2770 extern int startup_timeout;
2771 extern int aif_timeout;
2772 extern int expose_physicals;
2773 extern int aac_reset_devices;
2774 extern int aac_msi;
2775 extern int aac_commit;
2776 extern int update_interval;
2777 extern int check_interval;
2778 extern int aac_check_reset;
2779 extern int aac_fib_dump;
2780 #endif