drivers/regulator/da9055-regulator.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Regulator driver for DA9055 PMIC
   4 //
   5 // Copyright(c) 2012 Dialog Semiconductor Ltd.
   6 //
   7 // Author: David Dajun Chen <[email protected]>
   8
   9 #include <linux/module.h>
  10 #include <linux/init.h>
  11 #include <linux/err.h>
  12 #include <linux/gpio/consumer.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/regulator/driver.h>
  15 #include <linux/regulator/machine.h>
  16 #include <linux/of.h>
  17 #include <linux/regulator/of_regulator.h>
  18
  19 #include <linux/mfd/da9055/core.h>
  20 #include <linux/mfd/da9055/reg.h>
  21 #include <linux/mfd/da9055/pdata.h>
  22
  23 #define DA9055_MIN_UA           0
  24 #define DA9055_MAX_UA           3
  25
  26 #define DA9055_LDO_MODE_SYNC    0
  27 #define DA9055_LDO_MODE_SLEEP   1
  28
  29 #define DA9055_BUCK_MODE_SLEEP  1
  30 #define DA9055_BUCK_MODE_SYNC   2
  31 #define DA9055_BUCK_MODE_AUTO   3
  32
  33 /* DA9055 REGULATOR IDs */
  34 #define DA9055_ID_BUCK1 0
  35 #define DA9055_ID_BUCK2 1
  36 #define DA9055_ID_LDO1          2
  37 #define DA9055_ID_LDO2          3
  38 #define DA9055_ID_LDO3          4
  39 #define DA9055_ID_LDO4          5
  40 #define DA9055_ID_LDO5          6
  41 #define DA9055_ID_LDO6          7
  42
  43 /* DA9055 BUCK current limit */
  44 static const unsigned int da9055_current_limits[] = {
  45         500000, 600000, 700000, 800000
  46 };
  47
  48 struct da9055_conf_reg {
  49         int reg;
  50         int sel_mask;
  51         int en_mask;
  52 };
  53
  54 struct da9055_volt_reg {
  55         int reg_a;
  56         int reg_b;
  57         int sl_shift;
  58         int v_mask;
  59 };
  60
  61 struct da9055_mode_reg {
  62         int reg;
  63         int mask;
  64         int shift;
  65 };
  66
  67 struct da9055_regulator_info {
  68         struct regulator_desc reg_desc;
  69         struct da9055_conf_reg conf;
  70         struct da9055_volt_reg volt;
  71         struct da9055_mode_reg mode;
  72 };
  73
  74 struct da9055_regulator {
  75         struct da9055 *da9055;
  76         const struct da9055_regulator_info *info;
  77         struct regulator_dev *rdev;
  78         enum gpio_select reg_rselect;
  79 };
  80
  81 static unsigned int da9055_buck_get_mode(struct regulator_dev *rdev)
  82 {
  83         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
  84         const struct da9055_regulator_info *info = regulator->info;
  85         int ret, mode = 0;
  86
  87         ret = da9055_reg_read(regulator->da9055, info->mode.reg);
  88         if (ret < 0)
  89                 return ret;
  90
  91         switch ((ret & info->mode.mask) >> info->mode.shift) {
  92         case DA9055_BUCK_MODE_SYNC:
  93                 mode = REGULATOR_MODE_FAST;
  94                 break;
  95         case DA9055_BUCK_MODE_AUTO:
  96                 mode = REGULATOR_MODE_NORMAL;
  97                 break;
  98         case DA9055_BUCK_MODE_SLEEP:
  99                 mode = REGULATOR_MODE_STANDBY;
 100                 break;
 101         }
 102
 103         return mode;
 104 }
 105
 106 static int da9055_buck_set_mode(struct regulator_dev *rdev,
 107                                         unsigned int mode)
 108 {
 109         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 110         const struct da9055_regulator_info *info = regulator->info;
 111         int val = 0;
 112
 113         switch (mode) {
 114         case REGULATOR_MODE_FAST:
 115                 val = DA9055_BUCK_MODE_SYNC << info->mode.shift;
 116                 break;
 117         case REGULATOR_MODE_NORMAL:
 118                 val = DA9055_BUCK_MODE_AUTO << info->mode.shift;
 119                 break;
 120         case REGULATOR_MODE_STANDBY:
 121                 val = DA9055_BUCK_MODE_SLEEP << info->mode.shift;
 122                 break;
 123         }
 124
 125         return da9055_reg_update(regulator->da9055, info->mode.reg,
 126                                  info->mode.mask, val);
 127 }
 128
 129 static unsigned int da9055_ldo_get_mode(struct regulator_dev *rdev)
 130 {
 131         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 132         const struct da9055_regulator_info *info = regulator->info;
 133         int ret;
 134
 135         ret = da9055_reg_read(regulator->da9055, info->volt.reg_b);
 136         if (ret < 0)
 137                 return ret;
 138
 139         if (ret >> info->volt.sl_shift)
 140                 return REGULATOR_MODE_STANDBY;
 141         else
 142                 return REGULATOR_MODE_NORMAL;
 143 }
 144
 145 static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
 146 {
 147         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 148         const struct da9055_regulator_info *info = regulator->info;
 149         struct da9055_volt_reg volt = info->volt;
 150         int val = 0;
 151
 152         switch (mode) {
 153         case REGULATOR_MODE_NORMAL:
 154         case REGULATOR_MODE_FAST:
 155                 val = DA9055_LDO_MODE_SYNC;
 156                 break;
 157         case REGULATOR_MODE_STANDBY:
 158                 val = DA9055_LDO_MODE_SLEEP;
 159                 break;
 160         }
 161
 162         return da9055_reg_update(regulator->da9055, volt.reg_b,
 163                                  1 << volt.sl_shift,
 164                                  val << volt.sl_shift);
 165 }
 166
 167 static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
 168 {
 169         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 170         const struct da9055_regulator_info *info = regulator->info;
 171         struct da9055_volt_reg volt = info->volt;
 172         int ret, sel;
 173
 174         /*
 175          * There are two voltage register set A & B for voltage ramping but
 176          * either one of then can be active therefore we first determine
 177          * the active register set.
 178          */
 179         ret = da9055_reg_read(regulator->da9055, info->conf.reg);
 180         if (ret < 0)
 181                 return ret;
 182
 183         ret &= info->conf.sel_mask;
 184
 185         /* Get the voltage for the active register set A/B */
 186         if (ret == DA9055_REGUALTOR_SET_A)
 187                 ret = da9055_reg_read(regulator->da9055, volt.reg_a);
 188         else
 189                 ret = da9055_reg_read(regulator->da9055, volt.reg_b);
 190
 191         if (ret < 0)
 192                 return ret;
 193
 194         sel = (ret & volt.v_mask);
 195         return sel;
 196 }
 197
 198 static int da9055_regulator_set_voltage_sel(struct regulator_dev *rdev,
 199                                             unsigned int selector)
 200 {
 201         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 202         const struct da9055_regulator_info *info = regulator->info;
 203         int ret;
 204
 205         /*
 206          * Regulator register set A/B is not selected through GPIO therefore
 207          * we use default register set A for voltage ramping.
 208          */
 209         if (regulator->reg_rselect == NO_GPIO) {
 210                 /* Select register set A */
 211                 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 212                                         info->conf.sel_mask, DA9055_SEL_REG_A);
 213                 if (ret < 0)
 214                         return ret;
 215
 216                 /* Set the voltage */
 217                 return da9055_reg_update(regulator->da9055, info->volt.reg_a,
 218                                          info->volt.v_mask, selector);
 219         }
 220
 221         /*
 222          * Here regulator register set A/B is selected through GPIO.
 223          * Therefore we first determine the selected register set A/B and
 224          * then set the desired voltage for that register set A/B.
 225          */
 226         ret = da9055_reg_read(regulator->da9055, info->conf.reg);
 227         if (ret < 0)
 228                 return ret;
 229
 230         ret &= info->conf.sel_mask;
 231
 232         /* Set the voltage */
 233         if (ret == DA9055_REGUALTOR_SET_A)
 234                 return da9055_reg_update(regulator->da9055, info->volt.reg_a,
 235                                          info->volt.v_mask, selector);
 236         else
 237                 return da9055_reg_update(regulator->da9055, info->volt.reg_b,
 238                                          info->volt.v_mask, selector);
 239 }
 240
 241 static int da9055_regulator_set_suspend_voltage(struct regulator_dev *rdev,
 242                                                 int uV)
 243 {
 244         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 245         const struct da9055_regulator_info *info = regulator->info;
 246         int ret;
 247
 248         /* Select register set B for suspend voltage ramping. */
 249         if (regulator->reg_rselect == NO_GPIO) {
 250                 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 251                                         info->conf.sel_mask, DA9055_SEL_REG_B);
 252                 if (ret < 0)
 253                         return ret;
 254         }
 255
 256         ret = regulator_map_voltage_linear(rdev, uV, uV);
 257         if (ret < 0)
 258                 return ret;
 259
 260         return da9055_reg_update(regulator->da9055, info->volt.reg_b,
 261                                  info->volt.v_mask, ret);
 262 }
 263
 264 static int da9055_suspend_enable(struct regulator_dev *rdev)
 265 {
 266         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 267         const struct da9055_regulator_info *info = regulator->info;
 268
 269         /* Select register set B for voltage ramping. */
 270         if (regulator->reg_rselect == NO_GPIO)
 271                 return da9055_reg_update(regulator->da9055, info->conf.reg,
 272                                         info->conf.sel_mask, DA9055_SEL_REG_B);
 273         else
 274                 return 0;
 275 }
 276
 277 static int da9055_suspend_disable(struct regulator_dev *rdev)
 278 {
 279         struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 280         const struct da9055_regulator_info *info = regulator->info;
 281
 282         /* Diselect register set B. */
 283         if (regulator->reg_rselect == NO_GPIO)
 284                 return da9055_reg_update(regulator->da9055, info->conf.reg,
 285                                         info->conf.sel_mask, DA9055_SEL_REG_A);
 286         else
 287                 return 0;
 288 }
 289
 290 static const struct regulator_ops da9055_buck_ops = {
 291         .get_mode = da9055_buck_get_mode,
 292         .set_mode = da9055_buck_set_mode,
 293
 294         .get_current_limit = regulator_get_current_limit_regmap,
 295         .set_current_limit = regulator_set_current_limit_regmap,
 296
 297         .get_voltage_sel = da9055_regulator_get_voltage_sel,
 298         .set_voltage_sel = da9055_regulator_set_voltage_sel,
 299         .list_voltage = regulator_list_voltage_linear,
 300         .map_voltage = regulator_map_voltage_linear,
 301         .is_enabled = regulator_is_enabled_regmap,
 302         .enable = regulator_enable_regmap,
 303         .disable = regulator_disable_regmap,
 304
 305         .set_suspend_voltage = da9055_regulator_set_suspend_voltage,
 306         .set_suspend_enable = da9055_suspend_enable,
 307         .set_suspend_disable = da9055_suspend_disable,
 308         .set_suspend_mode = da9055_buck_set_mode,
 309 };
 310
 311 static const struct regulator_ops da9055_ldo_ops = {
 312         .get_mode = da9055_ldo_get_mode,
 313         .set_mode = da9055_ldo_set_mode,
 314
 315         .get_voltage_sel = da9055_regulator_get_voltage_sel,
 316         .set_voltage_sel = da9055_regulator_set_voltage_sel,
 317         .list_voltage = regulator_list_voltage_linear,
 318         .map_voltage = regulator_map_voltage_linear,
 319         .is_enabled = regulator_is_enabled_regmap,
 320         .enable = regulator_enable_regmap,
 321         .disable = regulator_disable_regmap,
 322
 323         .set_suspend_voltage = da9055_regulator_set_suspend_voltage,
 324         .set_suspend_enable = da9055_suspend_enable,
 325         .set_suspend_disable = da9055_suspend_disable,
 326         .set_suspend_mode = da9055_ldo_set_mode,
 327
 328 };
 329
 330 #define DA9055_LDO(_id, step, min, max, vbits, voffset) \
 331 {\
 332         .reg_desc = {\
 333                 .name = #_id,\
 334                 .of_match = of_match_ptr(#_id),\
 335                 .regulators_node = of_match_ptr("regulators"),\
 336                 .ops = &da9055_ldo_ops,\
 337                 .type = REGULATOR_VOLTAGE,\
 338                 .id = DA9055_ID_##_id,\
 339                 .n_voltages = (max - min) / step + 1 + (voffset), \
 340                 .enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 341                 .enable_mask = 1, \
 342                 .min_uV = (min) * 1000,\
 343                 .uV_step = (step) * 1000,\
 344                 .linear_min_sel = (voffset),\
 345                 .owner = THIS_MODULE,\
 346         },\
 347         .conf = {\
 348                 .reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 349                 .sel_mask = (1 << 4),\
 350                 .en_mask = 1,\
 351         },\
 352         .volt = {\
 353                 .reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
 354                 .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
 355                 .sl_shift = 7,\
 356                 .v_mask = (1 << (vbits)) - 1,\
 357         },\
 358 }
 359
 360 #define DA9055_BUCK(_id, step, min, max, vbits, voffset, mbits, sbits) \
 361 {\
 362         .reg_desc = {\
 363                 .name = #_id,\
 364                 .of_match = of_match_ptr(#_id),\
 365                 .regulators_node = of_match_ptr("regulators"),\
 366                 .ops = &da9055_buck_ops,\
 367                 .type = REGULATOR_VOLTAGE,\
 368                 .id = DA9055_ID_##_id,\
 369                 .n_voltages = (max - min) / step + 1 + (voffset), \
 370                 .enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 371                 .enable_mask = 1,\
 372                 .min_uV = (min) * 1000,\
 373                 .uV_step = (step) * 1000,\
 374                 .linear_min_sel = (voffset),\
 375                 .owner = THIS_MODULE,\
 376                 .curr_table = da9055_current_limits,\
 377                 .n_current_limits = ARRAY_SIZE(da9055_current_limits),\
 378                 .csel_reg = DA9055_REG_BUCK_LIM,\
 379                 .csel_mask = (mbits),\
 380         },\
 381         .conf = {\
 382                 .reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 383                 .sel_mask = (1 << 4),\
 384                 .en_mask = 1,\
 385         },\
 386         .volt = {\
 387                 .reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
 388                 .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
 389                 .sl_shift = 7,\
 390                 .v_mask = (1 << (vbits)) - 1,\
 391         },\
 392         .mode = {\
 393                 .reg = DA9055_REG_BCORE_MODE,\
 394                 .mask = (mbits),\
 395                 .shift = (sbits),\
 396         },\
 397 }
 398
 399 static const struct da9055_regulator_info da9055_regulator_info[] = {
 400         DA9055_BUCK(BUCK1, 25, 725, 2075, 6, 9, 0xc, 2),
 401         DA9055_BUCK(BUCK2, 25, 925, 2500, 6, 0, 3, 0),
 402         DA9055_LDO(LDO1, 50, 900, 3300, 6, 2),
 403         DA9055_LDO(LDO2, 50, 900, 3300, 6, 3),
 404         DA9055_LDO(LDO3, 50, 900, 3300, 6, 2),
 405         DA9055_LDO(LDO4, 50, 900, 3300, 6, 2),
 406         DA9055_LDO(LDO5, 50, 900, 2750, 6, 2),
 407         DA9055_LDO(LDO6, 20, 900, 3300, 7, 0),
 408 };
 409
 410 /*
 411  * Configures regulator to be controlled either through GPIO 1 or 2.
 412  * GPIO can control regulator state and/or select the regulator register
 413  * set A/B for voltage ramping.
 414  */
 415 static int da9055_gpio_init(struct device *dev,
 416                             struct da9055_regulator *regulator,
 417                             struct regulator_config *config,
 418                             struct da9055_pdata *pdata, int id)
 419 {
 420         const struct da9055_regulator_info *info = regulator->info;
 421         struct gpio_desc *ren;
 422         struct gpio_desc *ena;
 423         struct gpio_desc *rsel;
 424         int ret = 0;
 425
 426         /* Look for "regulator-enable-gpios" GPIOs in the regulator node */
 427         ren = devm_gpiod_get_optional(dev, "regulator-enable", GPIOD_IN);
 428         if (IS_ERR(ren))
 429                 return PTR_ERR(ren);
 430
 431         if (ren) {
 432                 /* This GPIO is not optional at this point */
 433                 ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
 434                 if (IS_ERR(ena))
 435                         return PTR_ERR(ena);
 436
 437                 config->ena_gpiod = ena;
 438
 439                 /*
 440                  * GPI pin is muxed with regulator to control the
 441                  * regulator state.
 442                  */
 443                 gpiod_set_consumer_name(ren, "DA9055 ren GPI");
 444
 445                 /*
 446                  * Let the regulator know that its state is controlled
 447                  * through GPI.
 448                  */
 449                 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 450                                         DA9055_E_GPI_MASK,
 451                                         pdata->reg_ren[id]
 452                                         << DA9055_E_GPI_SHIFT);
 453                 if (ret < 0)
 454                         return ret;
 455         }
 456
 457         /* Look for "regulator-select-gpios" GPIOs in the regulator node */
 458         rsel = devm_gpiod_get_optional(dev, "regulator-select", GPIOD_IN);
 459         if (IS_ERR(rsel))
 460                 return PTR_ERR(rsel);
 461
 462         if (rsel) {
 463                 regulator->reg_rselect = pdata->reg_rsel[id];
 464
 465                 /*
 466                  * GPI pin is muxed with regulator to select the
 467                  * regulator register set A/B for voltage ramping.
 468                  */
 469                 gpiod_set_consumer_name(rsel, "DA9055 rsel GPI");
 470
 471                 /*
 472                  * Let the regulator know that its register set A/B
 473                  * will be selected through GPI for voltage ramping.
 474                  */
 475                 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 476                                         DA9055_V_GPI_MASK,
 477                                         pdata->reg_rsel[id]
 478                                         << DA9055_V_GPI_SHIFT);
 479         }
 480
 481         return ret;
 482 }
 483
 484 static irqreturn_t da9055_ldo5_6_oc_irq(int irq, void *data)
 485 {
 486         struct da9055_regulator *regulator = data;
 487
 488         regulator_notifier_call_chain(regulator->rdev,
 489                                       REGULATOR_EVENT_OVER_CURRENT, NULL);
 490
 491         return IRQ_HANDLED;
 492 }
 493
 494 static inline const struct da9055_regulator_info *find_regulator_info(int id)
 495 {
 496         const struct da9055_regulator_info *info;
 497         int i;
 498
 499         for (i = 0; i < ARRAY_SIZE(da9055_regulator_info); i++) {
 500                 info = &da9055_regulator_info[i];
 501                 if (info->reg_desc.id == id)
 502                         return info;
 503         }
 504
 505         return NULL;
 506 }
 507
 508 static int da9055_regulator_probe(struct platform_device *pdev)
 509 {
 510         struct regulator_config config = { };
 511         struct da9055_regulator *regulator;
 512         struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
 513         struct da9055_pdata *pdata = dev_get_platdata(da9055->dev);
 514         int ret, irq;
 515
 516         regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator),
 517                                  GFP_KERNEL);
 518         if (!regulator)
 519                 return -ENOMEM;
 520
 521         regulator->info = find_regulator_info(pdev->id);
 522         if (regulator->info == NULL) {
 523                 dev_err(&pdev->dev, "invalid regulator ID specified\n");
 524                 return -EINVAL;
 525         }
 526
 527         regulator->da9055 = da9055;
 528         config.dev = da9055->dev;
 529         config.driver_data = regulator;
 530         config.regmap = da9055->regmap;
 531
 532         if (pdata)
 533                 config.init_data = pdata->regulators[pdev->id];
 534
 535         ret = da9055_gpio_init(&pdev->dev, regulator, &config, pdata, pdev->id);
 536         if (ret < 0)
 537                 return ret;
 538
 539         regulator->rdev = devm_regulator_register(&pdev->dev,
 540                                                   &regulator->info->reg_desc,
 541                                                   &config);
 542         if (IS_ERR(regulator->rdev)) {
 543                 dev_err(&pdev->dev, "Failed to register regulator %s\n",
 544                         regulator->info->reg_desc.name);
 545                 return PTR_ERR(regulator->rdev);
 546         }
 547
 548         /* Only LDO 5 and 6 has got the over current interrupt */
 549         if (pdev->id == DA9055_ID_LDO5 || pdev->id ==  DA9055_ID_LDO6) {
 550                 irq = platform_get_irq_byname(pdev, "REGULATOR");
 551                 if (irq < 0)
 552                         return irq;
 553
 554                 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 555                                                 da9055_ldo5_6_oc_irq,
 556                                                 IRQF_TRIGGER_HIGH |
 557                                                 IRQF_ONESHOT |
 558                                                 IRQF_PROBE_SHARED,
 559                                                 pdev->name, regulator);
 560                 if (ret != 0) {
 561                         if (ret != -EBUSY) {
 562                                 dev_err(&pdev->dev,
 563                                 "Failed to request Regulator IRQ %d: %d\n",
 564                                 irq, ret);
 565                                 return ret;
 566                         }
 567                 }
 568         }
 569
 570         platform_set_drvdata(pdev, regulator);
 571
 572         return 0;
 573 }
 574
 575 static struct platform_driver da9055_regulator_driver = {
 576         .probe = da9055_regulator_probe,
 577         .driver = {
 578                 .name = "da9055-regulator",
 579                 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
 580         },
 581 };
 582
 583 static int __init da9055_regulator_init(void)
 584 {
 585         return platform_driver_register(&da9055_regulator_driver);
 586 }
 587 subsys_initcall(da9055_regulator_init);
 588
 589 static void __exit da9055_regulator_exit(void)
 590 {
 591         platform_driver_unregister(&da9055_regulator_driver);
 592 }
 593 module_exit(da9055_regulator_exit);
 594
 595 MODULE_AUTHOR("David Dajun Chen <[email protected]>");
 596 MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9055 PMIC");
 597 MODULE_LICENSE("GPL");
 598 MODULE_ALIAS("platform:da9055-regulator");