drivers/net/wireless/intel/iwlwifi/fw/api/config.h

   1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
   2 /*
   3  * Copyright (C) 2012-2014, 2018-2019, 2023-2024 Intel Corporation
   4  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
   5  * Copyright (C) 2016-2017 Intel Deutschland GmbH
   6  */
   7 #ifndef __iwl_fw_api_config_h__
   8 #define __iwl_fw_api_config_h__
   9
  10 /*
  11  * struct iwl_dqa_enable_cmd
  12  * @cmd_queue: the TXQ number of the command queue
  13  */
  14 struct iwl_dqa_enable_cmd {
  15         __le32 cmd_queue;
  16 } __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */
  17
  18 /*
  19  * struct iwl_tx_ant_cfg_cmd
  20  * @valid: valid antenna configuration
  21  */
  22 struct iwl_tx_ant_cfg_cmd {
  23         __le32 valid;
  24 } __packed;
  25
  26 /**
  27  * struct iwl_calib_ctrl - Calibration control struct.
  28  * Sent as part of the phy configuration command.
  29  * @flow_trigger: bitmap for which calibrations to perform according to
  30  *              flow triggers, using &enum iwl_calib_cfg
  31  * @event_trigger: bitmap for which calibrations to perform according to
  32  *              event triggers, using &enum iwl_calib_cfg
  33  */
  34 struct iwl_calib_ctrl {
  35         __le32 flow_trigger;
  36         __le32 event_trigger;
  37 } __packed;
  38
  39 /* This enum defines the bitmap of various calibrations to enable in both
  40  * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
  41  */
  42 enum iwl_calib_cfg {
  43         IWL_CALIB_CFG_XTAL_IDX                  = BIT(0),
  44         IWL_CALIB_CFG_TEMPERATURE_IDX           = BIT(1),
  45         IWL_CALIB_CFG_VOLTAGE_READ_IDX          = BIT(2),
  46         IWL_CALIB_CFG_PAPD_IDX                  = BIT(3),
  47         IWL_CALIB_CFG_TX_PWR_IDX                = BIT(4),
  48         IWL_CALIB_CFG_DC_IDX                    = BIT(5),
  49         IWL_CALIB_CFG_BB_FILTER_IDX             = BIT(6),
  50         IWL_CALIB_CFG_LO_LEAKAGE_IDX            = BIT(7),
  51         IWL_CALIB_CFG_TX_IQ_IDX                 = BIT(8),
  52         IWL_CALIB_CFG_TX_IQ_SKEW_IDX            = BIT(9),
  53         IWL_CALIB_CFG_RX_IQ_IDX                 = BIT(10),
  54         IWL_CALIB_CFG_RX_IQ_SKEW_IDX            = BIT(11),
  55         IWL_CALIB_CFG_SENSITIVITY_IDX           = BIT(12),
  56         IWL_CALIB_CFG_CHAIN_NOISE_IDX           = BIT(13),
  57         IWL_CALIB_CFG_DISCONNECTED_ANT_IDX      = BIT(14),
  58         IWL_CALIB_CFG_ANT_COUPLING_IDX          = BIT(15),
  59         IWL_CALIB_CFG_DAC_IDX                   = BIT(16),
  60         IWL_CALIB_CFG_ABS_IDX                   = BIT(17),
  61         IWL_CALIB_CFG_AGC_IDX                   = BIT(18),
  62 };
  63
  64 /**
  65  * struct iwl_phy_specific_cfg - specific PHY filter configuration
  66  *
  67  * Sent as part of the phy configuration command (v3) to configure specific FW
  68  * defined PHY filters that can be applied to each antenna.
  69  *
  70  * @filter_cfg_chains: filter config id for LMAC1 chain A, LMAC1 chain B,
  71  *      LMAC2 chain A, LMAC2 chain B (in that order)
  72  *      values: 0: no filter; 0xffffffff: reserved; otherwise: filter id
  73  */
  74 struct iwl_phy_specific_cfg {
  75         __le32 filter_cfg_chains[4];
  76 } __packed; /* PHY_SPECIFIC_CONFIGURATION_API_VER_1*/
  77
  78 /**
  79  * struct iwl_phy_cfg_cmd_v1 - Phy configuration command
  80  *
  81  * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
  82  * @calib_control: calibration control data
  83  */
  84 struct iwl_phy_cfg_cmd_v1 {
  85         __le32  phy_cfg;
  86         struct iwl_calib_ctrl calib_control;
  87 } __packed;
  88
  89 /**
  90  * struct iwl_phy_cfg_cmd_v3 - Phy configuration command (v3)
  91  *
  92  * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
  93  * @calib_control: calibration control data
  94  * @phy_specific_cfg: configure predefined PHY filters
  95  */
  96 struct iwl_phy_cfg_cmd_v3 {
  97         __le32  phy_cfg;
  98         struct iwl_calib_ctrl calib_control;
  99         struct iwl_phy_specific_cfg phy_specific_cfg;
 100 } __packed; /* PHY_CONFIGURATION_CMD_API_S_VER_3 */
 101
 102 /*
 103  * enum iwl_dc2dc_config_id - flag ids
 104  *
 105  * Ids of dc2dc configuration flags
 106  */
 107 enum iwl_dc2dc_config_id {
 108         DCDC_LOW_POWER_MODE_MSK_SET  = 0x1, /* not used */
 109         DCDC_FREQ_TUNE_SET = 0x2,
 110 }; /* MARKER_ID_API_E_VER_1 */
 111
 112 #endif /* __iwl_fw_api_config_h__ */