drivers/net/ethernet/intel/e1000e/ptp.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /* Copyright(c) 1999 - 2018 Intel Corporation. */
   3
   4 /* PTP 1588 Hardware Clock (PHC)
   5  * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb)
   6  * Copyright (C) 2011 Richard Cochran <[email protected]>
   7  */
   8
   9 #include "e1000.h"
  10
  11 #ifdef CONFIG_E1000E_HWTS
  12 #include <linux/clocksource.h>
  13 #include <linux/ktime.h>
  14 #include <asm/tsc.h>
  15 #endif
  16
  17 /**
  18  * e1000e_phc_adjfine - adjust the frequency of the hardware clock
  19  * @ptp: ptp clock structure
  20  * @delta: Desired frequency chance in scaled parts per million
  21  *
  22  * Adjust the frequency of the PHC cycle counter by the indicated delta from
  23  * the base frequency.
  24  *
  25  * Scaled parts per million is ppm but with a 16 bit binary fractional field.
  26  **/
  27 static int e1000e_phc_adjfine(struct ptp_clock_info *ptp, long delta)
  28 {
  29         struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
  30                                                      ptp_clock_info);
  31         struct e1000_hw *hw = &adapter->hw;
  32         unsigned long flags;
  33         u64 incvalue;
  34         u32 timinca;
  35         s32 ret_val;
  36
  37         /* Get the System Time Register SYSTIM base frequency */
  38         ret_val = e1000e_get_base_timinca(adapter, &timinca);
  39         if (ret_val)
  40                 return ret_val;
  41
  42         spin_lock_irqsave(&adapter->systim_lock, flags);
  43
  44         incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK;
  45         incvalue = adjust_by_scaled_ppm(incvalue, delta);
  46
  47         timinca &= ~E1000_TIMINCA_INCVALUE_MASK;
  48         timinca |= incvalue;
  49
  50         ew32(TIMINCA, timinca);
  51
  52         adapter->ptp_delta = delta;
  53
  54         spin_unlock_irqrestore(&adapter->systim_lock, flags);
  55
  56         return 0;
  57 }
  58
  59 /**
  60  * e1000e_phc_adjtime - Shift the time of the hardware clock
  61  * @ptp: ptp clock structure
  62  * @delta: Desired change in nanoseconds
  63  *
  64  * Adjust the timer by resetting the timecounter structure.
  65  **/
  66 static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
  67 {
  68         struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
  69                                                      ptp_clock_info);
  70         unsigned long flags;
  71
  72         spin_lock_irqsave(&adapter->systim_lock, flags);
  73         timecounter_adjtime(&adapter->tc, delta);
  74         spin_unlock_irqrestore(&adapter->systim_lock, flags);
  75
  76         return 0;
  77 }
  78
  79 #ifdef CONFIG_E1000E_HWTS
  80 #define MAX_HW_WAIT_COUNT (3)
  81
  82 /**
  83  * e1000e_phc_get_syncdevicetime - Callback given to timekeeping code reads system/device registers
  84  * @device: current device time
  85  * @system: system counter value read synchronously with device time
  86  * @ctx: context provided by timekeeping code
  87  *
  88  * Read device and system (ART) clock simultaneously and return the corrected
  89  * clock values in ns.
  90  **/
  91 static int e1000e_phc_get_syncdevicetime(ktime_t *device,
  92                                          struct system_counterval_t *system,
  93                                          void *ctx)
  94 {
  95         struct e1000_adapter *adapter = (struct e1000_adapter *)ctx;
  96         struct e1000_hw *hw = &adapter->hw;
  97         unsigned long flags;
  98         int i;
  99         u32 tsync_ctrl;
 100         u64 dev_cycles;
 101         u64 sys_cycles;
 102
 103         tsync_ctrl = er32(TSYNCTXCTL);
 104         tsync_ctrl |= E1000_TSYNCTXCTL_START_SYNC |
 105                 E1000_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK;
 106         ew32(TSYNCTXCTL, tsync_ctrl);
 107         for (i = 0; i < MAX_HW_WAIT_COUNT; ++i) {
 108                 udelay(1);
 109                 tsync_ctrl = er32(TSYNCTXCTL);
 110                 if (tsync_ctrl & E1000_TSYNCTXCTL_SYNC_COMP)
 111                         break;
 112         }
 113
 114         if (i == MAX_HW_WAIT_COUNT)
 115                 return -ETIMEDOUT;
 116
 117         dev_cycles = er32(SYSSTMPH);
 118         dev_cycles <<= 32;
 119         dev_cycles |= er32(SYSSTMPL);
 120         spin_lock_irqsave(&adapter->systim_lock, flags);
 121         *device = ns_to_ktime(timecounter_cyc2time(&adapter->tc, dev_cycles));
 122         spin_unlock_irqrestore(&adapter->systim_lock, flags);
 123
 124         sys_cycles = er32(PLTSTMPH);
 125         sys_cycles <<= 32;
 126         sys_cycles |= er32(PLTSTMPL);
 127         system->cycles = sys_cycles;
 128         system->cs_id = CSID_X86_ART;
 129
 130         return 0;
 131 }
 132
 133 /**
 134  * e1000e_phc_getcrosststamp - Reads the current system/device cross timestamp
 135  * @ptp: ptp clock structure
 136  * @xtstamp: structure containing timestamp
 137  *
 138  * Read device and system (ART) clock simultaneously and return the scaled
 139  * clock values in ns.
 140  **/
 141 static int e1000e_phc_getcrosststamp(struct ptp_clock_info *ptp,
 142                                      struct system_device_crosststamp *xtstamp)
 143 {
 144         struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
 145                                                      ptp_clock_info);
 146
 147         return get_device_system_crosststamp(e1000e_phc_get_syncdevicetime,
 148                                                 adapter, NULL, xtstamp);
 149 }
 150 #endif/*CONFIG_E1000E_HWTS*/
 151
 152 /**
 153  * e1000e_phc_gettimex - Reads the current time from the hardware clock and
 154  *                       system clock
 155  * @ptp: ptp clock structure
 156  * @ts: timespec structure to hold the current PHC time
 157  * @sts: structure to hold the current system time
 158  *
 159  * Read the timecounter and return the correct value in ns after converting
 160  * it into a struct timespec.
 161  **/
 162 static int e1000e_phc_gettimex(struct ptp_clock_info *ptp,
 163                                struct timespec64 *ts,
 164                                struct ptp_system_timestamp *sts)
 165 {
 166         struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
 167                                                      ptp_clock_info);
 168         unsigned long flags;
 169         u64 cycles, ns;
 170
 171         spin_lock_irqsave(&adapter->systim_lock, flags);
 172
 173         /* NOTE: Non-monotonic SYSTIM readings may be returned */
 174         cycles = e1000e_read_systim(adapter, sts);
 175         ns = timecounter_cyc2time(&adapter->tc, cycles);
 176
 177         spin_unlock_irqrestore(&adapter->systim_lock, flags);
 178
 179         *ts = ns_to_timespec64(ns);
 180
 181         return 0;
 182 }
 183
 184 /**
 185  * e1000e_phc_settime - Set the current time on the hardware clock
 186  * @ptp: ptp clock structure
 187  * @ts: timespec containing the new time for the cycle counter
 188  *
 189  * Reset the timecounter to use a new base value instead of the kernel
 190  * wall timer value.
 191  **/
 192 static int e1000e_phc_settime(struct ptp_clock_info *ptp,
 193                               const struct timespec64 *ts)
 194 {
 195         struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
 196                                                      ptp_clock_info);
 197         unsigned long flags;
 198         u64 ns;
 199
 200         ns = timespec64_to_ns(ts);
 201
 202         /* reset the timecounter */
 203         spin_lock_irqsave(&adapter->systim_lock, flags);
 204         timecounter_init(&adapter->tc, &adapter->cc, ns);
 205         spin_unlock_irqrestore(&adapter->systim_lock, flags);
 206
 207         return 0;
 208 }
 209
 210 /**
 211  * e1000e_phc_enable - enable or disable an ancillary feature
 212  * @ptp: ptp clock structure
 213  * @request: Desired resource to enable or disable
 214  * @on: Caller passes one to enable or zero to disable
 215  *
 216  * Enable (or disable) ancillary features of the PHC subsystem.
 217  * Currently, no ancillary features are supported.
 218  **/
 219 static int e1000e_phc_enable(struct ptp_clock_info __always_unused *ptp,
 220                              struct ptp_clock_request __always_unused *request,
 221                              int __always_unused on)
 222 {
 223         return -EOPNOTSUPP;
 224 }
 225
 226 static void e1000e_systim_overflow_work(struct work_struct *work)
 227 {
 228         struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
 229                                                      systim_overflow_work.work);
 230         struct e1000_hw *hw = &adapter->hw;
 231         struct timespec64 ts;
 232         u64 ns;
 233
 234         /* Update the timecounter */
 235         ns = timecounter_read(&adapter->tc);
 236
 237         ts = ns_to_timespec64(ns);
 238         e_dbg("SYSTIM overflow check at %lld.%09lu\n",
 239               (long long) ts.tv_sec, ts.tv_nsec);
 240
 241         schedule_delayed_work(&adapter->systim_overflow_work,
 242                               E1000_SYSTIM_OVERFLOW_PERIOD);
 243 }
 244
 245 static const struct ptp_clock_info e1000e_ptp_clock_info = {
 246         .owner          = THIS_MODULE,
 247         .n_alarm        = 0,
 248         .n_ext_ts       = 0,
 249         .n_per_out      = 0,
 250         .n_pins         = 0,
 251         .pps            = 0,
 252         .adjfine        = e1000e_phc_adjfine,
 253         .adjtime        = e1000e_phc_adjtime,
 254         .gettimex64     = e1000e_phc_gettimex,
 255         .settime64      = e1000e_phc_settime,
 256         .enable         = e1000e_phc_enable,
 257 };
 258
 259 /**
 260  * e1000e_ptp_init - initialize PTP for devices which support it
 261  * @adapter: board private structure
 262  *
 263  * This function performs the required steps for enabling PTP support.
 264  * If PTP support has already been loaded it simply calls the cyclecounter
 265  * init routine and exits.
 266  **/
 267 void e1000e_ptp_init(struct e1000_adapter *adapter)
 268 {
 269         struct e1000_hw *hw = &adapter->hw;
 270
 271         adapter->ptp_clock = NULL;
 272
 273         if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
 274                 return;
 275
 276         adapter->ptp_clock_info = e1000e_ptp_clock_info;
 277
 278         snprintf(adapter->ptp_clock_info.name,
 279                  sizeof(adapter->ptp_clock_info.name), "%pm",
 280                  adapter->netdev->perm_addr);
 281
 282         switch (hw->mac.type) {
 283         case e1000_pch2lan:
 284                 adapter->ptp_clock_info.max_adj = MAX_PPB_96MHZ;
 285                 break;
 286         case e1000_pch_lpt:
 287                 if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)
 288                         adapter->ptp_clock_info.max_adj = MAX_PPB_96MHZ;
 289                 else
 290                         adapter->ptp_clock_info.max_adj = MAX_PPB_25MHZ;
 291                 break;
 292         case e1000_pch_spt:
 293                 adapter->ptp_clock_info.max_adj = MAX_PPB_24MHZ;
 294                 break;
 295         case e1000_pch_cnp:
 296         case e1000_pch_tgp:
 297         case e1000_pch_adp:
 298         case e1000_pch_mtp:
 299         case e1000_pch_lnp:
 300         case e1000_pch_ptp:
 301         case e1000_pch_nvp:
 302                 if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)
 303                         adapter->ptp_clock_info.max_adj = MAX_PPB_24MHZ;
 304                 else
 305                         adapter->ptp_clock_info.max_adj = MAX_PPB_38400KHZ;
 306                 break;
 307         case e1000_82574:
 308         case e1000_82583:
 309                 adapter->ptp_clock_info.max_adj = MAX_PPB_25MHZ;
 310                 break;
 311         default:
 312                 break;
 313         }
 314
 315 #ifdef CONFIG_E1000E_HWTS
 316         /* CPU must have ART and GBe must be from Sunrise Point or greater */
 317         if (hw->mac.type >= e1000_pch_spt && boot_cpu_has(X86_FEATURE_ART))
 318                 adapter->ptp_clock_info.getcrosststamp =
 319                         e1000e_phc_getcrosststamp;
 320 #endif/*CONFIG_E1000E_HWTS*/
 321
 322         INIT_DELAYED_WORK(&adapter->systim_overflow_work,
 323                           e1000e_systim_overflow_work);
 324
 325         schedule_delayed_work(&adapter->systim_overflow_work,
 326                               E1000_SYSTIM_OVERFLOW_PERIOD);
 327
 328         adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info,
 329                                                 &adapter->pdev->dev);
 330         if (IS_ERR(adapter->ptp_clock)) {
 331                 adapter->ptp_clock = NULL;
 332                 e_err("ptp_clock_register failed\n");
 333         } else if (adapter->ptp_clock) {
 334                 e_info("registered PHC clock\n");
 335         }
 336 }
 337
 338 /**
 339  * e1000e_ptp_remove - disable PTP device and stop the overflow check
 340  * @adapter: board private structure
 341  *
 342  * Stop the PTP support, and cancel the delayed work.
 343  **/
 344 void e1000e_ptp_remove(struct e1000_adapter *adapter)
 345 {
 346         if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
 347                 return;
 348
 349         cancel_delayed_work_sync(&adapter->systim_overflow_work);
 350
 351         if (adapter->ptp_clock) {
 352                 ptp_clock_unregister(adapter->ptp_clock);
 353                 adapter->ptp_clock = NULL;
 354                 e_info("removed PHC\n");
 355         }
 356 }