drivers/media/i2c/gc08a3.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Driver for GalaxyCore gc08a3 image sensor
   4  *
   5  * Copyright 2024 MediaTek
   6  *
   7  * Zhi Mao <[email protected]>
   8  */
   9 #include <linux/array_size.h>
  10 #include <linux/bits.h>
  11 #include <linux/clk.h>
  12 #include <linux/container_of.h>
  13 #include <linux/delay.h>
  14 #include <linux/device.h>
  15 #include <linux/err.h>
  16 #include <linux/gpio/consumer.h>
  17 #include <linux/math64.h>
  18 #include <linux/mod_devicetable.h>
  19 #include <linux/pm_runtime.h>
  20 #include <linux/property.h>
  21 #include <linux/regulator/consumer.h>
  22 #include <linux/types.h>
  23 #include <linux/units.h>
  24
  25 #include <media/v4l2-cci.h>
  26 #include <media/v4l2-ctrls.h>
  27 #include <media/v4l2-fwnode.h>
  28 #include <media/v4l2-subdev.h>
  29
  30 #define GC08A3_REG_TEST_PATTERN_EN CCI_REG8(0x008c)
  31 #define GC08A3_REG_TEST_PATTERN_IDX CCI_REG8(0x008d)
  32 #define GC08A3_TEST_PATTERN_EN 0x01
  33
  34 #define GC08A3_STREAMING_REG CCI_REG8(0x0100)
  35
  36 #define GC08A3_FLIP_REG CCI_REG8(0x0101)
  37 #define GC08A3_FLIP_H_MASK BIT(0)
  38 #define GC08A3_FLIP_V_MASK BIT(1)
  39
  40 #define GC08A3_EXP_REG CCI_REG16(0x0202)
  41 #define GC08A3_EXP_MARGIN 16
  42 #define GC08A3_EXP_MIN 4
  43 #define GC08A3_EXP_STEP 1
  44
  45 #define GC08A3_AGAIN_REG CCI_REG16(0x0204)
  46 #define GC08A3_AGAIN_MIN 1024
  47 #define GC08A3_AGAIN_MAX (1024 * 16)
  48 #define GC08A3_AGAIN_STEP 1
  49
  50 #define GC08A3_FRAME_LENGTH_REG CCI_REG16(0x0340)
  51 #define GC08A3_VTS_MAX 0xfff0
  52
  53 #define GC08A3_REG_CHIP_ID CCI_REG16(0x03f0)
  54 #define GC08A3_CHIP_ID 0x08a3
  55
  56 #define GC08A3_NATIVE_WIDTH 3264
  57 #define GC08A3_NATIVE_HEIGHT 2448
  58
  59 #define GC08A3_DEFAULT_CLK_FREQ (24 * HZ_PER_MHZ)
  60 #define GC08A3_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
  61 #define GC08A3_DATA_LANES 4
  62
  63 #define GC08A3_RGB_DEPTH 10
  64
  65 #define GC08A3_SLEEP_US  (2 * USEC_PER_MSEC)
  66
  67 static const char *const gc08a3_test_pattern_menu[] = {
  68         "No Pattern", "Solid Black", "Colour Bar", "Solid White",
  69         "Solid Red", "Solid Green", "Solid Blue", "Solid Yellow",
  70 };
  71
  72 static const s64 gc08a3_link_freq_menu_items[] = {
  73         (336 * HZ_PER_MHZ),
  74         (207 * HZ_PER_MHZ),
  75 };
  76
  77 static const char *const gc08a3_supply_name[] = {
  78         "avdd",
  79         "dvdd",
  80         "dovdd",
  81 };
  82
  83 struct gc08a3 {
  84         struct device *dev;
  85         struct v4l2_subdev sd;
  86         struct media_pad pad;
  87
  88         struct clk *xclk;
  89         struct regulator_bulk_data supplies[ARRAY_SIZE(gc08a3_supply_name)];
  90         struct gpio_desc *reset_gpio;
  91
  92         struct v4l2_ctrl_handler ctrls;
  93         struct v4l2_ctrl *pixel_rate;
  94         struct v4l2_ctrl *link_freq;
  95         struct v4l2_ctrl *exposure;
  96         struct v4l2_ctrl *vblank;
  97         struct v4l2_ctrl *hblank;
  98         struct v4l2_ctrl *hflip;
  99         struct v4l2_ctrl *vflip;
 100
 101         struct regmap *regmap;
 102         unsigned long link_freq_bitmap;
 103         const struct gc08a3_mode *cur_mode;
 104 };
 105
 106 struct gc08a3_reg_list {
 107         u32 num_of_regs;
 108         const struct cci_reg_sequence *regs;
 109 };
 110
 111 static const struct cci_reg_sequence mode_3264x2448[] = {
 112         /* system */
 113         { CCI_REG8(0x0336), 0x70 },
 114         { CCI_REG8(0x0383), 0xbb },
 115         { CCI_REG8(0x0344), 0x00 },
 116         { CCI_REG8(0x0345), 0x06 },
 117         { CCI_REG8(0x0346), 0x00 },
 118         { CCI_REG8(0x0347), 0x04 },
 119         { CCI_REG8(0x0348), 0x0c },
 120         { CCI_REG8(0x0349), 0xd0 },
 121         { CCI_REG8(0x034a), 0x09 },
 122         { CCI_REG8(0x034b), 0x9c },
 123         { CCI_REG8(0x0202), 0x09 },
 124         { CCI_REG8(0x0203), 0x04 },
 125         { CCI_REG8(0x0340), 0x09 },
 126         { CCI_REG8(0x0341), 0xf4 },
 127         { CCI_REG8(0x0342), 0x07 },
 128         { CCI_REG8(0x0343), 0x1c },
 129
 130         { CCI_REG8(0x0226), 0x00 },
 131         { CCI_REG8(0x0227), 0x28 },
 132         { CCI_REG8(0x0e38), 0x49 },
 133         { CCI_REG8(0x0210), 0x13 },
 134         { CCI_REG8(0x0218), 0x00 },
 135         { CCI_REG8(0x0241), 0x88 },
 136         { CCI_REG8(0x0392), 0x60 },
 137
 138         /* ISP */
 139         { CCI_REG8(0x00a2), 0x00 },
 140         { CCI_REG8(0x00a3), 0x00 },
 141         { CCI_REG8(0x00ab), 0x00 },
 142         { CCI_REG8(0x00ac), 0x00 },
 143
 144         /* GAIN */
 145         { CCI_REG8(0x0204), 0x04 },
 146         { CCI_REG8(0x0205), 0x00 },
 147         { CCI_REG8(0x0050), 0x5c },
 148         { CCI_REG8(0x0051), 0x44 },
 149
 150         /* out window */
 151         { CCI_REG8(0x009a), 0x66 },
 152         { CCI_REG8(0x0351), 0x00 },
 153         { CCI_REG8(0x0352), 0x06 },
 154         { CCI_REG8(0x0353), 0x00 },
 155         { CCI_REG8(0x0354), 0x08 },
 156         { CCI_REG8(0x034c), 0x0c },
 157         { CCI_REG8(0x034d), 0xc0 },
 158         { CCI_REG8(0x034e), 0x09 },
 159         { CCI_REG8(0x034f), 0x90 },
 160
 161         /* MIPI */
 162         { CCI_REG8(0x0114), 0x03 },
 163         { CCI_REG8(0x0180), 0x65 },
 164         { CCI_REG8(0x0181), 0xf0 },
 165         { CCI_REG8(0x0185), 0x01 },
 166         { CCI_REG8(0x0115), 0x30 },
 167         { CCI_REG8(0x011b), 0x12 },
 168         { CCI_REG8(0x011c), 0x12 },
 169         { CCI_REG8(0x0121), 0x06 },
 170         { CCI_REG8(0x0122), 0x06 },
 171         { CCI_REG8(0x0123), 0x15 },
 172         { CCI_REG8(0x0124), 0x01 },
 173         { CCI_REG8(0x0125), 0x0b },
 174         { CCI_REG8(0x0126), 0x08 },
 175         { CCI_REG8(0x0129), 0x06 },
 176         { CCI_REG8(0x012a), 0x08 },
 177         { CCI_REG8(0x012b), 0x08 },
 178
 179         { CCI_REG8(0x0a73), 0x60 },
 180         { CCI_REG8(0x0a70), 0x11 },
 181         { CCI_REG8(0x0313), 0x80 },
 182         { CCI_REG8(0x0aff), 0x00 },
 183         { CCI_REG8(0x0a70), 0x00 },
 184         { CCI_REG8(0x00a4), 0x80 },
 185         { CCI_REG8(0x0316), 0x01 },
 186         { CCI_REG8(0x0a67), 0x00 },
 187         { CCI_REG8(0x0084), 0x10 },
 188         { CCI_REG8(0x0102), 0x09 },
 189 };
 190
 191 static const struct cci_reg_sequence mode_1920x1080[] = {
 192         /* system */
 193         { CCI_REG8(0x0336), 0x45 },
 194         { CCI_REG8(0x0383), 0x8b },
 195         { CCI_REG8(0x0344), 0x02 },
 196         { CCI_REG8(0x0345), 0xa6 },
 197         { CCI_REG8(0x0346), 0x02 },
 198         { CCI_REG8(0x0347), 0xb0 },
 199         { CCI_REG8(0x0348), 0x07 },
 200         { CCI_REG8(0x0349), 0x90 },
 201         { CCI_REG8(0x034a), 0x04 },
 202         { CCI_REG8(0x034b), 0x44 },
 203         { CCI_REG8(0x0202), 0x03 },
 204         { CCI_REG8(0x0203), 0x00 },
 205         { CCI_REG8(0x0340), 0x04 },
 206         { CCI_REG8(0x0341), 0xfc },
 207         { CCI_REG8(0x0342), 0x07 },
 208         { CCI_REG8(0x0343), 0x1c },
 209         { CCI_REG8(0x0226), 0x00 },
 210         { CCI_REG8(0x0227), 0x88 },
 211         { CCI_REG8(0x0e38), 0x49 },
 212         { CCI_REG8(0x0210), 0x13 },
 213         { CCI_REG8(0x0218), 0x00 },
 214         { CCI_REG8(0x0241), 0x88 },
 215         { CCI_REG8(0x0392), 0x60 },
 216
 217         /* ISP */
 218         { CCI_REG8(0x00a2), 0xac },
 219         { CCI_REG8(0x00a3), 0x02 },
 220         { CCI_REG8(0x00ab), 0xa0 },
 221         { CCI_REG8(0x00ac), 0x02 },
 222
 223         /* GAIN */
 224         { CCI_REG8(0x0204), 0x04 },
 225         { CCI_REG8(0x0205), 0x00 },
 226         { CCI_REG8(0x0050), 0x38 },
 227         { CCI_REG8(0x0051), 0x20 },
 228
 229         /* out window */
 230         { CCI_REG8(0x009a), 0x66 },
 231         { CCI_REG8(0x0351), 0x00 },
 232         { CCI_REG8(0x0352), 0x06 },
 233         { CCI_REG8(0x0353), 0x00 },
 234         { CCI_REG8(0x0354), 0x08 },
 235         { CCI_REG8(0x034c), 0x07 },
 236         { CCI_REG8(0x034d), 0x80 },
 237         { CCI_REG8(0x034e), 0x04 },
 238         { CCI_REG8(0x034f), 0x38 },
 239
 240         /* MIPI */
 241         { CCI_REG8(0x0114), 0x03 },
 242         { CCI_REG8(0x0180), 0x65 },
 243         { CCI_REG8(0x0181), 0xf0 },
 244         { CCI_REG8(0x0185), 0x01 },
 245         { CCI_REG8(0x0115), 0x30 },
 246         { CCI_REG8(0x011b), 0x12 },
 247         { CCI_REG8(0x011c), 0x12 },
 248         { CCI_REG8(0x0121), 0x02 },
 249         { CCI_REG8(0x0122), 0x03 },
 250         { CCI_REG8(0x0123), 0x0c },
 251         { CCI_REG8(0x0124), 0x00 },
 252         { CCI_REG8(0x0125), 0x09 },
 253         { CCI_REG8(0x0126), 0x06 },
 254         { CCI_REG8(0x0129), 0x04 },
 255         { CCI_REG8(0x012a), 0x03 },
 256         { CCI_REG8(0x012b), 0x06 },
 257
 258         { CCI_REG8(0x0a73), 0x60 },
 259         { CCI_REG8(0x0a70), 0x11 },
 260         { CCI_REG8(0x0313), 0x80 },
 261         { CCI_REG8(0x0aff), 0x00 },
 262         { CCI_REG8(0x0a70), 0x00 },
 263         { CCI_REG8(0x00a4), 0x80 },
 264         { CCI_REG8(0x0316), 0x01 },
 265         { CCI_REG8(0x0a67), 0x00 },
 266         { CCI_REG8(0x0084), 0x10 },
 267         { CCI_REG8(0x0102), 0x09 },
 268 };
 269
 270 static const struct cci_reg_sequence mode_table_common[] = {
 271         { GC08A3_STREAMING_REG, 0x00 },
 272         /* system */
 273         { CCI_REG8(0x031c), 0x60 },
 274         { CCI_REG8(0x0337), 0x04 },
 275         { CCI_REG8(0x0335), 0x51 },
 276         { CCI_REG8(0x0336), 0x70 },
 277         { CCI_REG8(0x0383), 0xbb },
 278         { CCI_REG8(0x031a), 0x00 },
 279         { CCI_REG8(0x0321), 0x10 },
 280         { CCI_REG8(0x0327), 0x03 },
 281         { CCI_REG8(0x0325), 0x40 },
 282         { CCI_REG8(0x0326), 0x23 },
 283         { CCI_REG8(0x0314), 0x11 },
 284         { CCI_REG8(0x0315), 0xd6 },
 285         { CCI_REG8(0x0316), 0x01 },
 286         { CCI_REG8(0x0334), 0x40 },
 287         { CCI_REG8(0x0324), 0x42 },
 288         { CCI_REG8(0x031c), 0x00 },
 289         { CCI_REG8(0x031c), 0x9f },
 290         { CCI_REG8(0x039a), 0x13 },
 291         { CCI_REG8(0x0084), 0x30 },
 292         { CCI_REG8(0x02b3), 0x08 },
 293         { CCI_REG8(0x0057), 0x0c },
 294         { CCI_REG8(0x05c3), 0x50 },
 295         { CCI_REG8(0x0311), 0x90 },
 296         { CCI_REG8(0x05a0), 0x02 },
 297         { CCI_REG8(0x0074), 0x0a },
 298         { CCI_REG8(0x0059), 0x11 },
 299         { CCI_REG8(0x0070), 0x05 },
 300         { CCI_REG8(0x0101), 0x00 },
 301
 302         /* analog */
 303         { CCI_REG8(0x0344), 0x00 },
 304         { CCI_REG8(0x0345), 0x06 },
 305         { CCI_REG8(0x0346), 0x00 },
 306         { CCI_REG8(0x0347), 0x04 },
 307         { CCI_REG8(0x0348), 0x0c },
 308         { CCI_REG8(0x0349), 0xd0 },
 309         { CCI_REG8(0x034a), 0x09 },
 310         { CCI_REG8(0x034b), 0x9c },
 311         { CCI_REG8(0x0202), 0x09 },
 312         { CCI_REG8(0x0203), 0x04 },
 313
 314         { CCI_REG8(0x0219), 0x05 },
 315         { CCI_REG8(0x0226), 0x00 },
 316         { CCI_REG8(0x0227), 0x28 },
 317         { CCI_REG8(0x0e0a), 0x00 },
 318         { CCI_REG8(0x0e0b), 0x00 },
 319         { CCI_REG8(0x0e24), 0x04 },
 320         { CCI_REG8(0x0e25), 0x04 },
 321         { CCI_REG8(0x0e26), 0x00 },
 322         { CCI_REG8(0x0e27), 0x10 },
 323         { CCI_REG8(0x0e01), 0x74 },
 324         { CCI_REG8(0x0e03), 0x47 },
 325         { CCI_REG8(0x0e04), 0x33 },
 326         { CCI_REG8(0x0e05), 0x44 },
 327         { CCI_REG8(0x0e06), 0x44 },
 328         { CCI_REG8(0x0e0c), 0x1e },
 329         { CCI_REG8(0x0e17), 0x3a },
 330         { CCI_REG8(0x0e18), 0x3c },
 331         { CCI_REG8(0x0e19), 0x40 },
 332         { CCI_REG8(0x0e1a), 0x42 },
 333         { CCI_REG8(0x0e28), 0x21 },
 334         { CCI_REG8(0x0e2b), 0x68 },
 335         { CCI_REG8(0x0e2c), 0x0d },
 336         { CCI_REG8(0x0e2d), 0x08 },
 337         { CCI_REG8(0x0e34), 0xf4 },
 338         { CCI_REG8(0x0e35), 0x44 },
 339         { CCI_REG8(0x0e36), 0x07 },
 340         { CCI_REG8(0x0e38), 0x49 },
 341         { CCI_REG8(0x0210), 0x13 },
 342         { CCI_REG8(0x0218), 0x00 },
 343         { CCI_REG8(0x0241), 0x88 },
 344         { CCI_REG8(0x0e32), 0x00 },
 345         { CCI_REG8(0x0e33), 0x18 },
 346         { CCI_REG8(0x0e42), 0x03 },
 347         { CCI_REG8(0x0e43), 0x80 },
 348         { CCI_REG8(0x0e44), 0x04 },
 349         { CCI_REG8(0x0e45), 0x00 },
 350         { CCI_REG8(0x0e4f), 0x04 },
 351         { CCI_REG8(0x057a), 0x20 },
 352         { CCI_REG8(0x0381), 0x7c },
 353         { CCI_REG8(0x0382), 0x9b },
 354         { CCI_REG8(0x0384), 0xfb },
 355         { CCI_REG8(0x0389), 0x38 },
 356         { CCI_REG8(0x038a), 0x03 },
 357         { CCI_REG8(0x0390), 0x6a },
 358         { CCI_REG8(0x0391), 0x0b },
 359         { CCI_REG8(0x0392), 0x60 },
 360         { CCI_REG8(0x0393), 0xc1 },
 361         { CCI_REG8(0x0396), 0xff },
 362         { CCI_REG8(0x0398), 0x62 },
 363
 364         /* cisctl reset */
 365         { CCI_REG8(0x031c), 0x80 },
 366         { CCI_REG8(0x03fe), 0x10 },
 367         { CCI_REG8(0x03fe), 0x00 },
 368         { CCI_REG8(0x031c), 0x9f },
 369         { CCI_REG8(0x03fe), 0x00 },
 370         { CCI_REG8(0x03fe), 0x00 },
 371         { CCI_REG8(0x03fe), 0x00 },
 372         { CCI_REG8(0x03fe), 0x00 },
 373         { CCI_REG8(0x031c), 0x80 },
 374         { CCI_REG8(0x03fe), 0x10 },
 375         { CCI_REG8(0x03fe), 0x00 },
 376         { CCI_REG8(0x031c), 0x9f },
 377         { CCI_REG8(0x0360), 0x01 },
 378         { CCI_REG8(0x0360), 0x00 },
 379         { CCI_REG8(0x0316), 0x09 },
 380         { CCI_REG8(0x0a67), 0x80 },
 381         { CCI_REG8(0x0313), 0x00 },
 382         { CCI_REG8(0x0a53), 0x0e },
 383         { CCI_REG8(0x0a65), 0x17 },
 384         { CCI_REG8(0x0a68), 0xa1 },
 385         { CCI_REG8(0x0a58), 0x00 },
 386         { CCI_REG8(0x0ace), 0x0c },
 387         { CCI_REG8(0x00a4), 0x00 },
 388         { CCI_REG8(0x00a5), 0x01 },
 389         { CCI_REG8(0x00a7), 0x09 },
 390         { CCI_REG8(0x00a8), 0x9c },
 391         { CCI_REG8(0x00a9), 0x0c },
 392         { CCI_REG8(0x00aa), 0xd0 },
 393         { CCI_REG8(0x0a8a), 0x00 },
 394         { CCI_REG8(0x0a8b), 0xe0 },
 395         { CCI_REG8(0x0a8c), 0x13 },
 396         { CCI_REG8(0x0a8d), 0xe8 },
 397         { CCI_REG8(0x0a90), 0x0a },
 398         { CCI_REG8(0x0a91), 0x10 },
 399         { CCI_REG8(0x0a92), 0xf8 },
 400         { CCI_REG8(0x0a71), 0xf2 },
 401         { CCI_REG8(0x0a72), 0x12 },
 402         { CCI_REG8(0x0a73), 0x64 },
 403         { CCI_REG8(0x0a75), 0x41 },
 404         { CCI_REG8(0x0a70), 0x07 },
 405         { CCI_REG8(0x0313), 0x80 },
 406
 407         /* ISP */
 408         { CCI_REG8(0x00a0), 0x01 },
 409         { CCI_REG8(0x0080), 0xd2 },
 410         { CCI_REG8(0x0081), 0x3f },
 411         { CCI_REG8(0x0087), 0x51 },
 412         { CCI_REG8(0x0089), 0x03 },
 413         { CCI_REG8(0x009b), 0x40 },
 414         { CCI_REG8(0x05a0), 0x82 },
 415         { CCI_REG8(0x05ac), 0x00 },
 416         { CCI_REG8(0x05ad), 0x01 },
 417         { CCI_REG8(0x05ae), 0x00 },
 418         { CCI_REG8(0x0800), 0x0a },
 419         { CCI_REG8(0x0801), 0x14 },
 420         { CCI_REG8(0x0802), 0x28 },
 421         { CCI_REG8(0x0803), 0x34 },
 422         { CCI_REG8(0x0804), 0x0e },
 423         { CCI_REG8(0x0805), 0x33 },
 424         { CCI_REG8(0x0806), 0x03 },
 425         { CCI_REG8(0x0807), 0x8a },
 426         { CCI_REG8(0x0808), 0x50 },
 427         { CCI_REG8(0x0809), 0x00 },
 428         { CCI_REG8(0x080a), 0x34 },
 429         { CCI_REG8(0x080b), 0x03 },
 430         { CCI_REG8(0x080c), 0x26 },
 431         { CCI_REG8(0x080d), 0x03 },
 432         { CCI_REG8(0x080e), 0x18 },
 433         { CCI_REG8(0x080f), 0x03 },
 434         { CCI_REG8(0x0810), 0x10 },
 435         { CCI_REG8(0x0811), 0x03 },
 436         { CCI_REG8(0x0812), 0x00 },
 437         { CCI_REG8(0x0813), 0x00 },
 438         { CCI_REG8(0x0814), 0x01 },
 439         { CCI_REG8(0x0815), 0x00 },
 440         { CCI_REG8(0x0816), 0x01 },
 441         { CCI_REG8(0x0817), 0x00 },
 442         { CCI_REG8(0x0818), 0x00 },
 443         { CCI_REG8(0x0819), 0x0a },
 444         { CCI_REG8(0x081a), 0x01 },
 445         { CCI_REG8(0x081b), 0x6c },
 446         { CCI_REG8(0x081c), 0x00 },
 447         { CCI_REG8(0x081d), 0x0b },
 448         { CCI_REG8(0x081e), 0x02 },
 449         { CCI_REG8(0x081f), 0x00 },
 450         { CCI_REG8(0x0820), 0x00 },
 451         { CCI_REG8(0x0821), 0x0c },
 452         { CCI_REG8(0x0822), 0x02 },
 453         { CCI_REG8(0x0823), 0xd9 },
 454         { CCI_REG8(0x0824), 0x00 },
 455         { CCI_REG8(0x0825), 0x0d },
 456         { CCI_REG8(0x0826), 0x03 },
 457         { CCI_REG8(0x0827), 0xf0 },
 458         { CCI_REG8(0x0828), 0x00 },
 459         { CCI_REG8(0x0829), 0x0e },
 460         { CCI_REG8(0x082a), 0x05 },
 461         { CCI_REG8(0x082b), 0x94 },
 462         { CCI_REG8(0x082c), 0x09 },
 463         { CCI_REG8(0x082d), 0x6e },
 464         { CCI_REG8(0x082e), 0x07 },
 465         { CCI_REG8(0x082f), 0xe6 },
 466         { CCI_REG8(0x0830), 0x10 },
 467         { CCI_REG8(0x0831), 0x0e },
 468         { CCI_REG8(0x0832), 0x0b },
 469         { CCI_REG8(0x0833), 0x2c },
 470         { CCI_REG8(0x0834), 0x14 },
 471         { CCI_REG8(0x0835), 0xae },
 472         { CCI_REG8(0x0836), 0x0f },
 473         { CCI_REG8(0x0837), 0xc4 },
 474         { CCI_REG8(0x0838), 0x18 },
 475         { CCI_REG8(0x0839), 0x0e },
 476         { CCI_REG8(0x05ac), 0x01 },
 477         { CCI_REG8(0x059a), 0x00 },
 478         { CCI_REG8(0x059b), 0x00 },
 479         { CCI_REG8(0x059c), 0x01 },
 480         { CCI_REG8(0x0598), 0x00 },
 481         { CCI_REG8(0x0597), 0x14 },
 482         { CCI_REG8(0x05ab), 0x09 },
 483         { CCI_REG8(0x05a4), 0x02 },
 484         { CCI_REG8(0x05a3), 0x05 },
 485         { CCI_REG8(0x05a0), 0xc2 },
 486         { CCI_REG8(0x0207), 0xc4 },
 487
 488         /* GAIN */
 489         { CCI_REG8(0x0208), 0x01 },
 490         { CCI_REG8(0x0209), 0x72 },
 491         { CCI_REG8(0x0204), 0x04 },
 492         { CCI_REG8(0x0205), 0x00 },
 493
 494         { CCI_REG8(0x0040), 0x22 },
 495         { CCI_REG8(0x0041), 0x20 },
 496         { CCI_REG8(0x0043), 0x10 },
 497         { CCI_REG8(0x0044), 0x00 },
 498         { CCI_REG8(0x0046), 0x08 },
 499         { CCI_REG8(0x0047), 0xf0 },
 500         { CCI_REG8(0x0048), 0x0f },
 501         { CCI_REG8(0x004b), 0x0f },
 502         { CCI_REG8(0x004c), 0x00 },
 503         { CCI_REG8(0x0050), 0x5c },
 504         { CCI_REG8(0x0051), 0x44 },
 505         { CCI_REG8(0x005b), 0x03 },
 506         { CCI_REG8(0x00c0), 0x00 },
 507         { CCI_REG8(0x00c1), 0x80 },
 508         { CCI_REG8(0x00c2), 0x31 },
 509         { CCI_REG8(0x00c3), 0x00 },
 510         { CCI_REG8(0x0460), 0x04 },
 511         { CCI_REG8(0x0462), 0x08 },
 512         { CCI_REG8(0x0464), 0x0e },
 513         { CCI_REG8(0x0466), 0x0a },
 514         { CCI_REG8(0x0468), 0x12 },
 515         { CCI_REG8(0x046a), 0x12 },
 516         { CCI_REG8(0x046c), 0x10 },
 517         { CCI_REG8(0x046e), 0x0c },
 518         { CCI_REG8(0x0461), 0x03 },
 519         { CCI_REG8(0x0463), 0x03 },
 520         { CCI_REG8(0x0465), 0x03 },
 521         { CCI_REG8(0x0467), 0x03 },
 522         { CCI_REG8(0x0469), 0x04 },
 523         { CCI_REG8(0x046b), 0x04 },
 524         { CCI_REG8(0x046d), 0x04 },
 525         { CCI_REG8(0x046f), 0x04 },
 526         { CCI_REG8(0x0470), 0x04 },
 527         { CCI_REG8(0x0472), 0x10 },
 528         { CCI_REG8(0x0474), 0x26 },
 529         { CCI_REG8(0x0476), 0x38 },
 530         { CCI_REG8(0x0478), 0x20 },
 531         { CCI_REG8(0x047a), 0x30 },
 532         { CCI_REG8(0x047c), 0x38 },
 533         { CCI_REG8(0x047e), 0x60 },
 534         { CCI_REG8(0x0471), 0x05 },
 535         { CCI_REG8(0x0473), 0x05 },
 536         { CCI_REG8(0x0475), 0x05 },
 537         { CCI_REG8(0x0477), 0x05 },
 538         { CCI_REG8(0x0479), 0x04 },
 539         { CCI_REG8(0x047b), 0x04 },
 540         { CCI_REG8(0x047d), 0x04 },
 541         { CCI_REG8(0x047f), 0x04 },
 542 };
 543
 544 struct gc08a3_mode {
 545         u32 width;
 546         u32 height;
 547         const struct gc08a3_reg_list reg_list;
 548
 549         u32 hts; /* Horizontal timining size */
 550         u32 vts_def; /* Default vertical timining size */
 551         u32 vts_min; /* Min vertical timining size */
 552 };
 553
 554 /* Declare modes in order, from biggest to smallest height. */
 555 static const struct gc08a3_mode gc08a3_modes[] = {
 556         {
 557                 /* 3264*2448@30fps */
 558                 .width = GC08A3_NATIVE_WIDTH,
 559                 .height = GC08A3_NATIVE_HEIGHT,
 560                 .reg_list = {
 561                         .num_of_regs = ARRAY_SIZE(mode_3264x2448),
 562                         .regs = mode_3264x2448,
 563                 },
 564                 .hts = 3640,
 565                 .vts_def = 2548,
 566                 .vts_min = 2548,
 567         },
 568         {
 569                 /* 1920*1080@60fps */
 570                 .width = 1920,
 571                 .height = 1080,
 572                 .reg_list = {
 573                         .num_of_regs = ARRAY_SIZE(mode_1920x1080),
 574                         .regs = mode_1920x1080,
 575                 },
 576                 .hts = 3640,
 577                 .vts_def = 1276,
 578                 .vts_min = 1276,
 579         },
 580 };
 581
 582 static inline struct gc08a3 *to_gc08a3(struct v4l2_subdev *sd)
 583 {
 584         return container_of(sd, struct gc08a3, sd);
 585 }
 586
 587 static int gc08a3_power_on(struct device *dev)
 588 {
 589         struct v4l2_subdev *sd = dev_get_drvdata(dev);
 590         struct gc08a3 *gc08a3 = to_gc08a3(sd);
 591         int ret;
 592
 593         ret = regulator_bulk_enable(ARRAY_SIZE(gc08a3_supply_name),
 594                                     gc08a3->supplies);
 595         if (ret < 0) {
 596                 dev_err(gc08a3->dev, "failed to enable regulators: %d\n", ret);
 597                 return ret;
 598         }
 599
 600         ret = clk_prepare_enable(gc08a3->xclk);
 601         if (ret < 0) {
 602                 regulator_bulk_disable(ARRAY_SIZE(gc08a3_supply_name),
 603                                        gc08a3->supplies);
 604                 dev_err(gc08a3->dev, "clk prepare enable failed\n");
 605                 return ret;
 606         }
 607
 608         fsleep(GC08A3_SLEEP_US);
 609
 610         gpiod_set_value_cansleep(gc08a3->reset_gpio, 0);
 611         fsleep(GC08A3_SLEEP_US);
 612
 613         return 0;
 614 }
 615
 616 static int gc08a3_power_off(struct device *dev)
 617 {
 618         struct v4l2_subdev *sd = dev_get_drvdata(dev);
 619         struct gc08a3 *gc08a3 = to_gc08a3(sd);
 620
 621         clk_disable_unprepare(gc08a3->xclk);
 622         gpiod_set_value_cansleep(gc08a3->reset_gpio, 1);
 623         regulator_bulk_disable(ARRAY_SIZE(gc08a3_supply_name),
 624                                gc08a3->supplies);
 625
 626         return 0;
 627 }
 628
 629 static int gc08a3_enum_mbus_code(struct v4l2_subdev *sd,
 630                                  struct v4l2_subdev_state *sd_state,
 631                                  struct v4l2_subdev_mbus_code_enum *code)
 632 {
 633         if (code->index > 0)
 634                 return -EINVAL;
 635
 636         code->code = GC08A3_MBUS_CODE;
 637
 638         return 0;
 639 }
 640
 641 static int gc08a3_enum_frame_size(struct v4l2_subdev *subdev,
 642                                   struct v4l2_subdev_state *sd_state,
 643                                   struct v4l2_subdev_frame_size_enum *fse)
 644 {
 645         if (fse->code != GC08A3_MBUS_CODE)
 646                 return -EINVAL;
 647
 648         if (fse->index >= ARRAY_SIZE(gc08a3_modes))
 649                 return -EINVAL;
 650
 651         fse->min_width = gc08a3_modes[fse->index].width;
 652         fse->max_width = gc08a3_modes[fse->index].width;
 653         fse->min_height = gc08a3_modes[fse->index].height;
 654         fse->max_height = gc08a3_modes[fse->index].height;
 655
 656         return 0;
 657 }
 658
 659 static int gc08a3_update_cur_mode_controls(struct gc08a3 *gc08a3,
 660                                            const struct gc08a3_mode *mode)
 661 {
 662         s64 exposure_max, h_blank;
 663         int ret;
 664
 665         ret = __v4l2_ctrl_modify_range(gc08a3->vblank,
 666                                        mode->vts_min - mode->height,
 667                                        GC08A3_VTS_MAX - mode->height, 1,
 668                                        mode->vts_def - mode->height);
 669         if (ret) {
 670                 dev_err(gc08a3->dev, "VB ctrl range update failed\n");
 671                 return ret;
 672         }
 673
 674         h_blank = mode->hts - mode->width;
 675         ret = __v4l2_ctrl_modify_range(gc08a3->hblank, h_blank, h_blank, 1,
 676                                        h_blank);
 677         if (ret) {
 678                 dev_err(gc08a3->dev, "HB ctrl range update failed\n");
 679                 return ret;
 680         }
 681
 682         exposure_max = mode->vts_def - GC08A3_EXP_MARGIN;
 683         ret = __v4l2_ctrl_modify_range(gc08a3->exposure, GC08A3_EXP_MIN,
 684                                        exposure_max, GC08A3_EXP_STEP,
 685                                        exposure_max);
 686         if (ret) {
 687                 dev_err(gc08a3->dev, "exposure ctrl range update failed\n");
 688                 return ret;
 689         }
 690
 691         return 0;
 692 }
 693
 694 static void gc08a3_update_pad_format(struct gc08a3 *gc08a3,
 695                                      const struct gc08a3_mode *mode,
 696                                      struct v4l2_mbus_framefmt *fmt)
 697 {
 698         fmt->width = mode->width;
 699         fmt->height = mode->height;
 700         fmt->code = GC08A3_MBUS_CODE;
 701         fmt->field = V4L2_FIELD_NONE;
 702         fmt->colorspace = V4L2_COLORSPACE_RAW;
 703         fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
 704         fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
 705         fmt->xfer_func = V4L2_XFER_FUNC_NONE;
 706 }
 707
 708 static int gc08a3_set_format(struct v4l2_subdev *sd,
 709                              struct v4l2_subdev_state *state,
 710                              struct v4l2_subdev_format *fmt)
 711 {
 712         struct gc08a3 *gc08a3 = to_gc08a3(sd);
 713         struct v4l2_mbus_framefmt *mbus_fmt;
 714         struct v4l2_rect *crop;
 715         const struct gc08a3_mode *mode;
 716
 717         mode = v4l2_find_nearest_size(gc08a3_modes, ARRAY_SIZE(gc08a3_modes),
 718                                       width, height, fmt->format.width,
 719                                       fmt->format.height);
 720
 721         /* update crop info to subdev state */
 722         crop = v4l2_subdev_state_get_crop(state, 0);
 723         crop->width = mode->width;
 724         crop->height = mode->height;
 725
 726         /* update fmt info to subdev state */
 727         gc08a3_update_pad_format(gc08a3, mode, &fmt->format);
 728         mbus_fmt = v4l2_subdev_state_get_format(state, 0);
 729         *mbus_fmt = fmt->format;
 730
 731         if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
 732                 return 0;
 733
 734         gc08a3->cur_mode = mode;
 735         gc08a3_update_cur_mode_controls(gc08a3, mode);
 736
 737         return 0;
 738 }
 739
 740 static int gc08a3_get_selection(struct v4l2_subdev *sd,
 741                                 struct v4l2_subdev_state *state,
 742                                 struct v4l2_subdev_selection *sel)
 743 {
 744         switch (sel->target) {
 745         case V4L2_SEL_TGT_CROP_DEFAULT:
 746         case V4L2_SEL_TGT_CROP:
 747                 sel->r = *v4l2_subdev_state_get_crop(state, 0);
 748                 break;
 749         case V4L2_SEL_TGT_CROP_BOUNDS:
 750                 sel->r.top = 0;
 751                 sel->r.left = 0;
 752                 sel->r.width = GC08A3_NATIVE_WIDTH;
 753                 sel->r.height = GC08A3_NATIVE_HEIGHT;
 754                 break;
 755         default:
 756                 return -EINVAL;
 757         }
 758
 759         return 0;
 760 }
 761
 762 static int gc08a3_init_state(struct v4l2_subdev *sd,
 763                              struct v4l2_subdev_state *state)
 764 {
 765         struct v4l2_subdev_format fmt = {
 766                 .which = V4L2_SUBDEV_FORMAT_TRY,
 767                 .pad = 0,
 768                 .format = {
 769                         .code = GC08A3_MBUS_CODE,
 770                         .width = gc08a3_modes[0].width,
 771                         .height = gc08a3_modes[0].height,
 772                 },
 773         };
 774
 775         gc08a3_set_format(sd, state, &fmt);
 776
 777         return 0;
 778 }
 779
 780 static int gc08a3_set_ctrl_hflip(struct gc08a3 *gc08a3, u32 ctrl_val)
 781 {
 782         int ret;
 783         u64 val;
 784
 785         ret = cci_read(gc08a3->regmap, GC08A3_FLIP_REG, &val, NULL);
 786         if (ret) {
 787                 dev_err(gc08a3->dev, "read hflip register failed: %d\n", ret);
 788                 return ret;
 789         }
 790
 791         return cci_update_bits(gc08a3->regmap, GC08A3_FLIP_REG,
 792                                GC08A3_FLIP_H_MASK,
 793                                ctrl_val ? GC08A3_FLIP_H_MASK : 0, NULL);
 794 }
 795
 796 static int gc08a3_set_ctrl_vflip(struct gc08a3 *gc08a3, u32 ctrl_val)
 797 {
 798         int ret;
 799         u64 val;
 800
 801         ret = cci_read(gc08a3->regmap, GC08A3_FLIP_REG, &val, NULL);
 802         if (ret) {
 803                 dev_err(gc08a3->dev, "read vflip register failed: %d\n", ret);
 804                 return ret;
 805         }
 806
 807         return cci_update_bits(gc08a3->regmap, GC08A3_FLIP_REG,
 808                                GC08A3_FLIP_V_MASK,
 809                                ctrl_val ? GC08A3_FLIP_V_MASK : 0, NULL);
 810 }
 811
 812 static int gc08a3_test_pattern(struct gc08a3 *gc08a3, u32 pattern_menu)
 813 {
 814         u32 pattern;
 815         int ret;
 816
 817         if (pattern_menu) {
 818                 switch (pattern_menu) {
 819                 case 1:
 820                         pattern = 0x00;
 821                         break;
 822                 case 2:
 823                         pattern = 0x10;
 824                         break;
 825                 case 3:
 826                 case 4:
 827                 case 5:
 828                 case 6:
 829                 case 7:
 830                         pattern = pattern_menu + 1;
 831                         break;
 832                 default:
 833                         pattern = 0x00;
 834                         break;
 835                 }
 836
 837                 ret = cci_write(gc08a3->regmap, GC08A3_REG_TEST_PATTERN_IDX,
 838                                 pattern, NULL);
 839                 if (ret)
 840                         return ret;
 841
 842                 return cci_write(gc08a3->regmap, GC08A3_REG_TEST_PATTERN_EN,
 843                                  GC08A3_TEST_PATTERN_EN, NULL);
 844         } else {
 845                 return cci_write(gc08a3->regmap, GC08A3_REG_TEST_PATTERN_EN,
 846                                  0x00, NULL);
 847         }
 848 }
 849
 850 static int gc08a3_set_ctrl(struct v4l2_ctrl *ctrl)
 851 {
 852         struct gc08a3 *gc08a3 =
 853                 container_of(ctrl->handler, struct gc08a3, ctrls);
 854         int ret = 0;
 855         s64 exposure_max;
 856         struct v4l2_subdev_state *state;
 857         const struct v4l2_mbus_framefmt *format;
 858
 859         state = v4l2_subdev_get_locked_active_state(&gc08a3->sd);
 860         format = v4l2_subdev_state_get_format(state, 0);
 861
 862         if (ctrl->id == V4L2_CID_VBLANK) {
 863                 /* Update max exposure while meeting expected vblanking */
 864                 exposure_max = format->height + ctrl->val - GC08A3_EXP_MARGIN;
 865                 __v4l2_ctrl_modify_range(gc08a3->exposure,
 866                                          gc08a3->exposure->minimum,
 867                                          exposure_max, gc08a3->exposure->step,
 868                                          exposure_max);
 869         }
 870
 871         /*
 872          * Applying V4L2 control value only happens
 873          * when power is on for streaming.
 874          */
 875         if (!pm_runtime_get_if_active(gc08a3->dev))
 876                 return 0;
 877
 878         switch (ctrl->id) {
 879         case V4L2_CID_EXPOSURE:
 880                 ret = cci_write(gc08a3->regmap, GC08A3_EXP_REG,
 881                                 ctrl->val, NULL);
 882                 break;
 883
 884         case V4L2_CID_ANALOGUE_GAIN:
 885                 ret = cci_write(gc08a3->regmap, GC08A3_AGAIN_REG,
 886                                 ctrl->val, NULL);
 887                 break;
 888
 889         case V4L2_CID_VBLANK:
 890                 ret = cci_write(gc08a3->regmap, GC08A3_FRAME_LENGTH_REG,
 891                                 gc08a3->cur_mode->height + ctrl->val, NULL);
 892                 break;
 893
 894         case V4L2_CID_HFLIP:
 895                 ret = gc08a3_set_ctrl_hflip(gc08a3, ctrl->val);
 896                 break;
 897
 898         case V4L2_CID_VFLIP:
 899                 ret = gc08a3_set_ctrl_vflip(gc08a3, ctrl->val);
 900                 break;
 901
 902         case V4L2_CID_TEST_PATTERN:
 903                 ret = gc08a3_test_pattern(gc08a3, ctrl->val);
 904                 break;
 905
 906         default:
 907                 break;
 908         }
 909
 910         pm_runtime_put(gc08a3->dev);
 911
 912         return ret;
 913 }
 914
 915 static const struct v4l2_ctrl_ops gc08a3_ctrl_ops = {
 916         .s_ctrl = gc08a3_set_ctrl,
 917 };
 918
 919 static int gc08a3_start_streaming(struct gc08a3 *gc08a3)
 920 {
 921         const struct gc08a3_mode *mode;
 922         const struct gc08a3_reg_list *reg_list;
 923         int ret;
 924
 925         ret = pm_runtime_resume_and_get(gc08a3->dev);
 926         if (ret < 0)
 927                 return ret;
 928
 929         ret = cci_multi_reg_write(gc08a3->regmap,
 930                                   mode_table_common,
 931                                   ARRAY_SIZE(mode_table_common), NULL);
 932         if (ret)
 933                 goto err_rpm_put;
 934
 935         mode = gc08a3->cur_mode;
 936         reg_list = &mode->reg_list;
 937         ret = cci_multi_reg_write(gc08a3->regmap,
 938                                   reg_list->regs, reg_list->num_of_regs, NULL);
 939         if (ret < 0)
 940                 goto err_rpm_put;
 941
 942         ret = __v4l2_ctrl_handler_setup(&gc08a3->ctrls);
 943         if (ret < 0) {
 944                 dev_err(gc08a3->dev, "could not sync v4l2 controls\n");
 945                 goto err_rpm_put;
 946         }
 947
 948         ret = cci_write(gc08a3->regmap, GC08A3_STREAMING_REG, 1, NULL);
 949         if (ret < 0) {
 950                 dev_err(gc08a3->dev, "write STREAMING_REG failed: %d\n", ret);
 951                 goto err_rpm_put;
 952         }
 953
 954         return 0;
 955
 956 err_rpm_put:
 957         pm_runtime_put(gc08a3->dev);
 958         return ret;
 959 }
 960
 961 static int gc08a3_stop_streaming(struct gc08a3 *gc08a3)
 962 {
 963         int ret;
 964
 965         ret = cci_write(gc08a3->regmap, GC08A3_STREAMING_REG, 0, NULL);
 966         if (ret < 0)
 967                 dev_err(gc08a3->dev, "could not sent stop streaming %d\n", ret);
 968
 969         pm_runtime_put(gc08a3->dev);
 970         return ret;
 971 }
 972
 973 static int gc08a3_s_stream(struct v4l2_subdev *subdev, int enable)
 974 {
 975         struct gc08a3 *gc08a3 = to_gc08a3(subdev);
 976         struct v4l2_subdev_state *state;
 977         int ret;
 978
 979         state = v4l2_subdev_lock_and_get_active_state(subdev);
 980
 981         if (enable)
 982                 ret = gc08a3_start_streaming(gc08a3);
 983         else
 984                 ret = gc08a3_stop_streaming(gc08a3);
 985
 986         v4l2_subdev_unlock_state(state);
 987
 988         return ret;
 989 }
 990
 991 static const struct v4l2_subdev_video_ops gc08a3_video_ops = {
 992         .s_stream = gc08a3_s_stream,
 993 };
 994
 995 static const struct v4l2_subdev_pad_ops gc08a3_subdev_pad_ops = {
 996         .enum_mbus_code = gc08a3_enum_mbus_code,
 997         .enum_frame_size = gc08a3_enum_frame_size,
 998         .get_fmt = v4l2_subdev_get_fmt,
 999         .set_fmt = gc08a3_set_format,
1000         .get_selection = gc08a3_get_selection,
1001 };
1002
1003 static const struct v4l2_subdev_ops gc08a3_subdev_ops = {
1004         .video = &gc08a3_video_ops,
1005         .pad = &gc08a3_subdev_pad_ops,
1006 };
1007
1008 static const struct v4l2_subdev_internal_ops gc08a3_internal_ops = {
1009         .init_state = gc08a3_init_state,
1010 };
1011
1012 static int gc08a3_get_regulators(struct device *dev, struct gc08a3 *gc08a3)
1013 {
1014         unsigned int i;
1015
1016         for (i = 0; i < ARRAY_SIZE(gc08a3_supply_name); i++)
1017                 gc08a3->supplies[i].supply = gc08a3_supply_name[i];
1018
1019         return devm_regulator_bulk_get(dev, ARRAY_SIZE(gc08a3_supply_name),
1020                                        gc08a3->supplies);
1021 }
1022
1023 static int gc08a3_parse_fwnode(struct gc08a3 *gc08a3)
1024 {
1025         struct fwnode_handle *endpoint;
1026         struct v4l2_fwnode_endpoint bus_cfg = {
1027                 .bus_type = V4L2_MBUS_CSI2_DPHY,
1028         };
1029         int ret;
1030         struct device *dev = gc08a3->dev;
1031
1032         endpoint =
1033                 fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
1034                                                 FWNODE_GRAPH_ENDPOINT_NEXT);
1035         if (!endpoint) {
1036                 dev_err(dev, "endpoint node not found\n");
1037                 return -EINVAL;
1038         }
1039
1040         ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
1041         if (ret) {
1042                 dev_err(dev, "parsing endpoint node failed\n");
1043                 goto done;
1044         }
1045
1046         ret = v4l2_link_freq_to_bitmap(dev, bus_cfg.link_frequencies,
1047                                        bus_cfg.nr_of_link_frequencies,
1048                                        gc08a3_link_freq_menu_items,
1049                                        ARRAY_SIZE(gc08a3_link_freq_menu_items),
1050                                        &gc08a3->link_freq_bitmap);
1051         if (ret)
1052                 goto done;
1053
1054 done:
1055         v4l2_fwnode_endpoint_free(&bus_cfg);
1056         fwnode_handle_put(endpoint);
1057         return ret;
1058 }
1059
1060 static u64 gc08a3_to_pixel_rate(u32 f_index)
1061 {
1062         u64 pixel_rate =
1063                 gc08a3_link_freq_menu_items[f_index] * 2 * GC08A3_DATA_LANES;
1064
1065         return div_u64(pixel_rate, GC08A3_RGB_DEPTH);
1066 }
1067
1068 static int gc08a3_init_controls(struct gc08a3 *gc08a3)
1069 {
1070         struct i2c_client *client = v4l2_get_subdevdata(&gc08a3->sd);
1071         const struct gc08a3_mode *mode = &gc08a3_modes[0];
1072         const struct v4l2_ctrl_ops *ops = &gc08a3_ctrl_ops;
1073         struct v4l2_fwnode_device_properties props;
1074         struct v4l2_ctrl_handler *ctrl_hdlr;
1075         s64 exposure_max, h_blank;
1076         int ret;
1077
1078         ctrl_hdlr = &gc08a3->ctrls;
1079         ret = v4l2_ctrl_handler_init(ctrl_hdlr, 9);
1080         if (ret)
1081                 return ret;
1082
1083         gc08a3->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
1084                                           V4L2_CID_HFLIP, 0, 1, 1, 0);
1085         gc08a3->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
1086                                           V4L2_CID_VFLIP, 0, 1, 1, 0);
1087         v4l2_ctrl_cluster(2, &gc08a3->hflip);
1088
1089         gc08a3->link_freq =
1090         v4l2_ctrl_new_int_menu(ctrl_hdlr,
1091                                &gc08a3_ctrl_ops,
1092                                V4L2_CID_LINK_FREQ,
1093                                ARRAY_SIZE(gc08a3_link_freq_menu_items) - 1,
1094                                0,
1095                                gc08a3_link_freq_menu_items);
1096         if (gc08a3->link_freq)
1097                 gc08a3->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
1098
1099         gc08a3->pixel_rate =
1100                 v4l2_ctrl_new_std(ctrl_hdlr,
1101                                   &gc08a3_ctrl_ops,
1102                                   V4L2_CID_PIXEL_RATE, 0,
1103                                   gc08a3_to_pixel_rate(0),
1104                                   1,
1105                                   gc08a3_to_pixel_rate(0));
1106
1107         gc08a3->vblank =
1108                 v4l2_ctrl_new_std(ctrl_hdlr,
1109                                   &gc08a3_ctrl_ops, V4L2_CID_VBLANK,
1110                                   mode->vts_min - mode->height,
1111                                   GC08A3_VTS_MAX - mode->height, 1,
1112                                   mode->vts_def - mode->height);
1113
1114         h_blank = mode->hts - mode->width;
1115         gc08a3->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
1116                                            V4L2_CID_HBLANK, h_blank, h_blank, 1,
1117                                            h_blank);
1118         if (gc08a3->hblank)
1119                 gc08a3->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
1120
1121         v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
1122                           V4L2_CID_ANALOGUE_GAIN, GC08A3_AGAIN_MIN,
1123                           GC08A3_AGAIN_MAX, GC08A3_AGAIN_STEP,
1124                           GC08A3_AGAIN_MIN);
1125
1126         exposure_max = mode->vts_def - GC08A3_EXP_MARGIN;
1127         gc08a3->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
1128                                              V4L2_CID_EXPOSURE, GC08A3_EXP_MIN,
1129                                              exposure_max, GC08A3_EXP_STEP,
1130                                              exposure_max);
1131
1132         v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &gc08a3_ctrl_ops,
1133                                      V4L2_CID_TEST_PATTERN,
1134                                      ARRAY_SIZE(gc08a3_test_pattern_menu) - 1,
1135                                      0, 0, gc08a3_test_pattern_menu);
1136
1137         /* register properties to fwnode (e.g. rotation, orientation) */
1138         ret = v4l2_fwnode_device_parse(&client->dev, &props);
1139         if (ret)
1140                 goto error_ctrls;
1141
1142         ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, ops, &props);
1143         if (ret)
1144                 goto error_ctrls;
1145
1146         if (ctrl_hdlr->error) {
1147                 ret = ctrl_hdlr->error;
1148                 goto error_ctrls;
1149         }
1150
1151         gc08a3->sd.ctrl_handler = ctrl_hdlr;
1152
1153         return 0;
1154
1155 error_ctrls:
1156         v4l2_ctrl_handler_free(ctrl_hdlr);
1157
1158         return ret;
1159 }
1160
1161 static int gc08a3_identify_module(struct gc08a3 *gc08a3)
1162 {
1163         u64 val;
1164         int ret;
1165
1166         ret = cci_read(gc08a3->regmap, GC08A3_REG_CHIP_ID, &val, NULL);
1167         if (ret) {
1168                 dev_err(gc08a3->dev, "failed to read chip id");
1169                 return ret;
1170         }
1171
1172         if (val != GC08A3_CHIP_ID) {
1173                 dev_err(gc08a3->dev, "chip id mismatch: 0x%x!=0x%llx",
1174                         GC08A3_CHIP_ID, val);
1175                 return -ENXIO;
1176         }
1177
1178         return 0;
1179 }
1180
1181 static int gc08a3_probe(struct i2c_client *client)
1182 {
1183         struct device *dev = &client->dev;
1184         struct gc08a3 *gc08a3;
1185         int ret;
1186
1187         gc08a3 = devm_kzalloc(dev, sizeof(*gc08a3), GFP_KERNEL);
1188         if (!gc08a3)
1189                 return -ENOMEM;
1190
1191         gc08a3->dev = dev;
1192
1193         ret = gc08a3_parse_fwnode(gc08a3);
1194         if (ret)
1195                 return ret;
1196
1197         gc08a3->regmap = devm_cci_regmap_init_i2c(client, 16);
1198         if (IS_ERR(gc08a3->regmap))
1199                 return dev_err_probe(dev, PTR_ERR(gc08a3->regmap),
1200                                      "failed to init CCI\n");
1201
1202         gc08a3->xclk = devm_clk_get(dev, NULL);
1203         if (IS_ERR(gc08a3->xclk))
1204                 return dev_err_probe(dev, PTR_ERR(gc08a3->xclk),
1205                                      "failed to get xclk\n");
1206
1207         ret = clk_set_rate(gc08a3->xclk, GC08A3_DEFAULT_CLK_FREQ);
1208         if (ret)
1209                 return dev_err_probe(dev, ret,
1210                                      "failed to set xclk frequency\n");
1211
1212         ret = gc08a3_get_regulators(dev, gc08a3);
1213         if (ret < 0)
1214                 return dev_err_probe(dev, ret,
1215                                      "failed to get regulators\n");
1216
1217         gc08a3->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
1218         if (IS_ERR(gc08a3->reset_gpio))
1219                 return dev_err_probe(dev, PTR_ERR(gc08a3->reset_gpio),
1220                                      "failed to get gpio\n");
1221
1222         v4l2_i2c_subdev_init(&gc08a3->sd, client, &gc08a3_subdev_ops);
1223         gc08a3->sd.internal_ops = &gc08a3_internal_ops;
1224         gc08a3->cur_mode = &gc08a3_modes[0];
1225
1226         ret = gc08a3_power_on(gc08a3->dev);
1227         if (ret)
1228                 return dev_err_probe(dev, ret,
1229                                      "failed to sensor power on\n");
1230
1231         ret = gc08a3_identify_module(gc08a3);
1232         if (ret) {
1233                 dev_err(&client->dev, "failed to find sensor: %d\n", ret);
1234                 goto err_power_off;
1235         }
1236
1237         ret = gc08a3_init_controls(gc08a3);
1238         if (ret) {
1239                 dev_err(&client->dev, "failed to init controls: %d", ret);
1240                 goto err_power_off;
1241         }
1242
1243         gc08a3->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1244         gc08a3->pad.flags = MEDIA_PAD_FL_SOURCE;
1245         gc08a3->sd.dev = &client->dev;
1246         gc08a3->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1247
1248         ret = media_entity_pads_init(&gc08a3->sd.entity, 1, &gc08a3->pad);
1249         if (ret < 0) {
1250                 dev_err(dev, "could not register media entity\n");
1251                 goto err_v4l2_ctrl_handler_free;
1252         }
1253
1254         gc08a3->sd.state_lock = gc08a3->ctrls.lock;
1255         ret = v4l2_subdev_init_finalize(&gc08a3->sd);
1256         if (ret < 0) {
1257                 dev_err(dev, "v4l2 subdev init error: %d\n", ret);
1258                 goto err_media_entity_cleanup;
1259         }
1260
1261         pm_runtime_set_active(gc08a3->dev);
1262         pm_runtime_enable(gc08a3->dev);
1263         pm_runtime_set_autosuspend_delay(gc08a3->dev, 1000);
1264         pm_runtime_use_autosuspend(gc08a3->dev);
1265         pm_runtime_idle(gc08a3->dev);
1266
1267         ret = v4l2_async_register_subdev_sensor(&gc08a3->sd);
1268         if (ret < 0) {
1269                 dev_err(dev, "could not register v4l2 device\n");
1270                 goto err_rpm;
1271         }
1272
1273         return 0;
1274
1275 err_rpm:
1276         pm_runtime_disable(gc08a3->dev);
1277         v4l2_subdev_cleanup(&gc08a3->sd);
1278
1279 err_media_entity_cleanup:
1280         media_entity_cleanup(&gc08a3->sd.entity);
1281
1282 err_v4l2_ctrl_handler_free:
1283         v4l2_ctrl_handler_free(gc08a3->sd.ctrl_handler);
1284
1285 err_power_off:
1286         gc08a3_power_off(gc08a3->dev);
1287
1288         return ret;
1289 }
1290
1291 static void gc08a3_remove(struct i2c_client *client)
1292 {
1293         struct v4l2_subdev *sd = i2c_get_clientdata(client);
1294         struct gc08a3 *gc08a3 = to_gc08a3(sd);
1295
1296         v4l2_async_unregister_subdev(&gc08a3->sd);
1297         v4l2_subdev_cleanup(sd);
1298         media_entity_cleanup(&gc08a3->sd.entity);
1299         v4l2_ctrl_handler_free(&gc08a3->ctrls);
1300
1301         pm_runtime_disable(&client->dev);
1302         if (!pm_runtime_status_suspended(&client->dev))
1303                 gc08a3_power_off(gc08a3->dev);
1304         pm_runtime_set_suspended(&client->dev);
1305 }
1306
1307 static const struct of_device_id gc08a3_of_match[] = {
1308         { .compatible = "galaxycore,gc08a3" },
1309         {}
1310 };
1311 MODULE_DEVICE_TABLE(of, gc08a3_of_match);
1312
1313 static DEFINE_RUNTIME_DEV_PM_OPS(gc08a3_pm_ops,
1314                                  gc08a3_power_off,
1315                                  gc08a3_power_on,
1316                                  NULL);
1317
1318 static struct i2c_driver gc08a3_i2c_driver = {
1319         .driver = {
1320                 .of_match_table = gc08a3_of_match,
1321                 .pm = pm_ptr(&gc08a3_pm_ops),
1322                 .name  = "gc08a3",
1323         },
1324         .probe  = gc08a3_probe,
1325         .remove = gc08a3_remove,
1326 };
1327 module_i2c_driver(gc08a3_i2c_driver);
1328
1329 MODULE_DESCRIPTION("GalaxyCore gc08a3 Camera driver");
1330 MODULE_AUTHOR("Zhi Mao <[email protected]>");
1331 MODULE_LICENSE("GPL");