]> Git Repo - J-linux.git/blob - drivers/hwmon/nct7802.c
Merge tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
[J-linux.git] / drivers / hwmon / nct7802.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * nct7802 - Driver for Nuvoton NCT7802Y
4  *
5  * Copyright (C) 2014  Guenter Roeck <[email protected]>
6  */
7
8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
9
10 #include <linux/err.h>
11 #include <linux/i2c.h>
12 #include <linux/init.h>
13 #include <linux/hwmon.h>
14 #include <linux/hwmon-sysfs.h>
15 #include <linux/jiffies.h>
16 #include <linux/module.h>
17 #include <linux/mutex.h>
18 #include <linux/regmap.h>
19 #include <linux/slab.h>
20
21 #define DRVNAME "nct7802"
22
23 static const u8 REG_VOLTAGE[5] = { 0x09, 0x0a, 0x0c, 0x0d, 0x0e };
24
25 static const u8 REG_VOLTAGE_LIMIT_LSB[2][5] = {
26         { 0x46, 0x00, 0x40, 0x42, 0x44 },
27         { 0x45, 0x00, 0x3f, 0x41, 0x43 },
28 };
29
30 static const u8 REG_VOLTAGE_LIMIT_MSB[5] = { 0x48, 0x00, 0x47, 0x47, 0x48 };
31
32 static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
33         { 0, 0, 4, 0, 4 },
34         { 2, 0, 6, 2, 6 },
35 };
36
37 #define REG_BANK                0x00
38 #define REG_TEMP_LSB            0x05
39 #define REG_TEMP_PECI_LSB       0x08
40 #define REG_VOLTAGE_LOW         0x0f
41 #define REG_FANCOUNT_LOW        0x13
42 #define REG_START               0x21
43 #define REG_MODE                0x22 /* 7.2.32 Mode Selection Register */
44 #define REG_PECI_ENABLE         0x23
45 #define REG_FAN_ENABLE          0x24
46 #define REG_VMON_ENABLE         0x25
47 #define REG_PWM(x)              (0x60 + (x))
48 #define REG_SMARTFAN_EN(x)      (0x64 + (x) / 2)
49 #define SMARTFAN_EN_SHIFT(x)    ((x) % 2 * 4)
50 #define REG_VENDOR_ID           0xfd
51 #define REG_CHIP_ID             0xfe
52 #define REG_VERSION_ID          0xff
53
54 /*
55  * Resistance temperature detector (RTD) modes according to 7.2.32 Mode
56  * Selection Register
57  */
58 #define RTD_MODE_CURRENT        0x1
59 #define RTD_MODE_THERMISTOR     0x2
60 #define RTD_MODE_VOLTAGE        0x3
61
62 #define MODE_RTD_MASK           0x3
63 #define MODE_LTD_EN             0x40
64
65 /*
66  * Bit offset for sensors modes in REG_MODE.
67  * Valid for index 0..2, indicating RTD1..3.
68  */
69 #define MODE_BIT_OFFSET_RTD(index) ((index) * 2)
70
71 /*
72  * Data structures and manipulation thereof
73  */
74
75 struct nct7802_data {
76         struct regmap *regmap;
77         struct mutex access_lock; /* for multi-byte read and write operations */
78         u8 in_status;
79         struct mutex in_alarm_lock;
80 };
81
82 static ssize_t temp_type_show(struct device *dev,
83                               struct device_attribute *attr, char *buf)
84 {
85         struct nct7802_data *data = dev_get_drvdata(dev);
86         struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
87         unsigned int mode;
88         int ret;
89
90         ret = regmap_read(data->regmap, REG_MODE, &mode);
91         if (ret < 0)
92                 return ret;
93
94         return sprintf(buf, "%u\n", (mode >> (2 * sattr->index) & 3) + 2);
95 }
96
97 static ssize_t temp_type_store(struct device *dev,
98                                struct device_attribute *attr, const char *buf,
99                                size_t count)
100 {
101         struct nct7802_data *data = dev_get_drvdata(dev);
102         struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
103         unsigned int type;
104         int err;
105
106         err = kstrtouint(buf, 0, &type);
107         if (err < 0)
108                 return err;
109         if (sattr->index == 2 && type != 4) /* RD3 */
110                 return -EINVAL;
111         if (type < 3 || type > 4)
112                 return -EINVAL;
113         err = regmap_update_bits(data->regmap, REG_MODE,
114                         3 << 2 * sattr->index, (type - 2) << 2 * sattr->index);
115         return err ? : count;
116 }
117
118 static ssize_t pwm_mode_show(struct device *dev,
119                              struct device_attribute *attr, char *buf)
120 {
121         struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
122         struct nct7802_data *data = dev_get_drvdata(dev);
123         unsigned int regval;
124         int ret;
125
126         if (sattr->index > 1)
127                 return sprintf(buf, "1\n");
128
129         ret = regmap_read(data->regmap, 0x5E, &regval);
130         if (ret < 0)
131                 return ret;
132
133         return sprintf(buf, "%u\n", !(regval & (1 << sattr->index)));
134 }
135
136 static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr,
137                         char *buf)
138 {
139         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
140         struct nct7802_data *data = dev_get_drvdata(dev);
141         unsigned int val;
142         int ret;
143
144         if (!attr->index)
145                 return sprintf(buf, "255\n");
146
147         ret = regmap_read(data->regmap, attr->index, &val);
148         if (ret < 0)
149                 return ret;
150
151         return sprintf(buf, "%d\n", val);
152 }
153
154 static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
155                          const char *buf, size_t count)
156 {
157         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
158         struct nct7802_data *data = dev_get_drvdata(dev);
159         int err;
160         u8 val;
161
162         err = kstrtou8(buf, 0, &val);
163         if (err < 0)
164                 return err;
165
166         err = regmap_write(data->regmap, attr->index, val);
167         return err ? : count;
168 }
169
170 static ssize_t pwm_enable_show(struct device *dev,
171                                struct device_attribute *attr, char *buf)
172 {
173         struct nct7802_data *data = dev_get_drvdata(dev);
174         struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
175         unsigned int reg, enabled;
176         int ret;
177
178         ret = regmap_read(data->regmap, REG_SMARTFAN_EN(sattr->index), &reg);
179         if (ret < 0)
180                 return ret;
181         enabled = reg >> SMARTFAN_EN_SHIFT(sattr->index) & 1;
182         return sprintf(buf, "%u\n", enabled + 1);
183 }
184
185 static ssize_t pwm_enable_store(struct device *dev,
186                                 struct device_attribute *attr,
187                                 const char *buf, size_t count)
188 {
189         struct nct7802_data *data = dev_get_drvdata(dev);
190         struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
191         u8 val;
192         int ret;
193
194         ret = kstrtou8(buf, 0, &val);
195         if (ret < 0)
196                 return ret;
197         if (val < 1 || val > 2)
198                 return -EINVAL;
199         ret = regmap_update_bits(data->regmap, REG_SMARTFAN_EN(sattr->index),
200                                  1 << SMARTFAN_EN_SHIFT(sattr->index),
201                                  (val - 1) << SMARTFAN_EN_SHIFT(sattr->index));
202         return ret ? : count;
203 }
204
205 static int nct7802_read_temp(struct nct7802_data *data,
206                              u8 reg_temp, u8 reg_temp_low, int *temp)
207 {
208         unsigned int t1, t2 = 0;
209         int err;
210
211         *temp = 0;
212
213         mutex_lock(&data->access_lock);
214         err = regmap_read(data->regmap, reg_temp, &t1);
215         if (err < 0)
216                 goto abort;
217         t1 <<= 8;
218         if (reg_temp_low) {     /* 11 bit data */
219                 err = regmap_read(data->regmap, reg_temp_low, &t2);
220                 if (err < 0)
221                         goto abort;
222         }
223         t1 |= t2 & 0xe0;
224         *temp = (s16)t1 / 32 * 125;
225 abort:
226         mutex_unlock(&data->access_lock);
227         return err;
228 }
229
230 static int nct7802_read_fan(struct nct7802_data *data, u8 reg_fan)
231 {
232         unsigned int regs[2] = {reg_fan, REG_FANCOUNT_LOW};
233         u8 f[2];
234         int ret;
235
236         ret = regmap_multi_reg_read(data->regmap, regs, f, 2);
237         if (ret)
238                 return ret;
239         ret = (f[0] << 5) | (f[1] >> 3);
240         /* convert fan count to rpm */
241         if (ret == 0x1fff)      /* maximum value, assume fan is stopped */
242                 ret = 0;
243         else if (ret)
244                 ret = DIV_ROUND_CLOSEST(1350000U, ret);
245         return ret;
246 }
247
248 static int nct7802_read_fan_min(struct nct7802_data *data, u8 reg_fan_low,
249                                 u8 reg_fan_high)
250 {
251         unsigned int regs[2] = {reg_fan_low, reg_fan_high};
252         u8 f[2];
253         int ret;
254
255         ret = regmap_multi_reg_read(data->regmap, regs, f, 2);
256         if (ret < 0)
257                 return ret;
258
259         ret = f[0] | ((f[1] & 0xf8) << 5);
260         /* convert fan count to rpm */
261         if (ret == 0x1fff)      /* maximum value, assume no limit */
262                 ret = 0;
263         else if (ret)
264                 ret = DIV_ROUND_CLOSEST(1350000U, ret);
265         else
266                 ret = 1350000U;
267         return ret;
268 }
269
270 static int nct7802_write_fan_min(struct nct7802_data *data, u8 reg_fan_low,
271                                  u8 reg_fan_high, unsigned long limit)
272 {
273         int err;
274
275         if (limit)
276                 limit = DIV_ROUND_CLOSEST(1350000U, limit);
277         else
278                 limit = 0x1fff;
279         limit = clamp_val(limit, 0, 0x1fff);
280
281         mutex_lock(&data->access_lock);
282         err = regmap_write(data->regmap, reg_fan_low, limit & 0xff);
283         if (err < 0)
284                 goto abort;
285
286         err = regmap_write(data->regmap, reg_fan_high, (limit & 0x1f00) >> 5);
287 abort:
288         mutex_unlock(&data->access_lock);
289         return err;
290 }
291
292 static u8 nct7802_vmul[] = { 4, 2, 2, 2, 2 };
293
294 static int nct7802_read_voltage(struct nct7802_data *data, int nr, int index)
295 {
296         u8 v[2];
297         int ret;
298
299         if (index == 0) {       /* voltage */
300                 unsigned int regs[2] = {REG_VOLTAGE[nr], REG_VOLTAGE_LOW};
301
302                 ret = regmap_multi_reg_read(data->regmap, regs, v, 2);
303                 if (ret < 0)
304                         return ret;
305                 ret = ((v[0] << 2) | (v[1] >> 6)) * nct7802_vmul[nr];
306         }  else {       /* limit */
307                 int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
308                 unsigned int regs[2] = {REG_VOLTAGE_LIMIT_LSB[index - 1][nr],
309                                         REG_VOLTAGE_LIMIT_MSB[nr]};
310
311                 ret = regmap_multi_reg_read(data->regmap, regs, v, 2);
312                 if (ret < 0)
313                         return ret;
314                 ret = (v[0] | ((v[1] << shift) & 0x300)) * nct7802_vmul[nr];
315         }
316         return ret;
317 }
318
319 static int nct7802_write_voltage(struct nct7802_data *data, int nr, int index,
320                                  unsigned long voltage)
321 {
322         int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
323         int err;
324
325         voltage = clamp_val(voltage, 0, 0x3ff * nct7802_vmul[nr]);
326         voltage = DIV_ROUND_CLOSEST(voltage, nct7802_vmul[nr]);
327
328         mutex_lock(&data->access_lock);
329         err = regmap_write(data->regmap,
330                            REG_VOLTAGE_LIMIT_LSB[index - 1][nr],
331                            voltage & 0xff);
332         if (err < 0)
333                 goto abort;
334
335         err = regmap_update_bits(data->regmap, REG_VOLTAGE_LIMIT_MSB[nr],
336                                  0x0300 >> shift, (voltage & 0x0300) >> shift);
337 abort:
338         mutex_unlock(&data->access_lock);
339         return err;
340 }
341
342 static ssize_t in_show(struct device *dev, struct device_attribute *attr,
343                        char *buf)
344 {
345         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
346         struct nct7802_data *data = dev_get_drvdata(dev);
347         int voltage;
348
349         voltage = nct7802_read_voltage(data, sattr->nr, sattr->index);
350         if (voltage < 0)
351                 return voltage;
352
353         return sprintf(buf, "%d\n", voltage);
354 }
355
356 static ssize_t in_store(struct device *dev, struct device_attribute *attr,
357                         const char *buf, size_t count)
358 {
359         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
360         struct nct7802_data *data = dev_get_drvdata(dev);
361         int index = sattr->index;
362         int nr = sattr->nr;
363         unsigned long val;
364         int err;
365
366         err = kstrtoul(buf, 10, &val);
367         if (err < 0)
368                 return err;
369
370         err = nct7802_write_voltage(data, nr, index, val);
371         return err ? : count;
372 }
373
374 static ssize_t in_alarm_show(struct device *dev, struct device_attribute *attr,
375                              char *buf)
376 {
377         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
378         struct nct7802_data *data = dev_get_drvdata(dev);
379         int volt, min, max, ret;
380         unsigned int val;
381
382         mutex_lock(&data->in_alarm_lock);
383
384         /*
385          * The SMI Voltage status register is the only register giving a status
386          * for voltages. A bit is set for each input crossing a threshold, in
387          * both direction, but the "inside" or "outside" limits info is not
388          * available. Also this register is cleared on read.
389          * Note: this is not explicitly spelled out in the datasheet, but
390          * from experiment.
391          * To deal with this we use a status cache with one validity bit and
392          * one status bit for each input. Validity is cleared at startup and
393          * each time the register reports a change, and the status is processed
394          * by software based on current input value and limits.
395          */
396         ret = regmap_read(data->regmap, 0x1e, &val); /* SMI Voltage status */
397         if (ret < 0)
398                 goto abort;
399
400         /* invalidate cached status for all inputs crossing a threshold */
401         data->in_status &= ~((val & 0x0f) << 4);
402
403         /* if cached status for requested input is invalid, update it */
404         if (!(data->in_status & (0x10 << sattr->index))) {
405                 ret = nct7802_read_voltage(data, sattr->nr, 0);
406                 if (ret < 0)
407                         goto abort;
408                 volt = ret;
409
410                 ret = nct7802_read_voltage(data, sattr->nr, 1);
411                 if (ret < 0)
412                         goto abort;
413                 min = ret;
414
415                 ret = nct7802_read_voltage(data, sattr->nr, 2);
416                 if (ret < 0)
417                         goto abort;
418                 max = ret;
419
420                 if (volt < min || volt > max)
421                         data->in_status |= (1 << sattr->index);
422                 else
423                         data->in_status &= ~(1 << sattr->index);
424
425                 data->in_status |= 0x10 << sattr->index;
426         }
427
428         ret = sprintf(buf, "%u\n", !!(data->in_status & (1 << sattr->index)));
429 abort:
430         mutex_unlock(&data->in_alarm_lock);
431         return ret;
432 }
433
434 static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
435                          char *buf)
436 {
437         struct nct7802_data *data = dev_get_drvdata(dev);
438         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
439         int err, temp;
440
441         err = nct7802_read_temp(data, sattr->nr, sattr->index, &temp);
442         if (err < 0)
443                 return err;
444
445         return sprintf(buf, "%d\n", temp);
446 }
447
448 static ssize_t temp_store(struct device *dev, struct device_attribute *attr,
449                           const char *buf, size_t count)
450 {
451         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
452         struct nct7802_data *data = dev_get_drvdata(dev);
453         int nr = sattr->nr;
454         long val;
455         int err;
456
457         err = kstrtol(buf, 10, &val);
458         if (err < 0)
459                 return err;
460
461         val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000);
462
463         err = regmap_write(data->regmap, nr, val & 0xff);
464         return err ? : count;
465 }
466
467 static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
468                         char *buf)
469 {
470         struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
471         struct nct7802_data *data = dev_get_drvdata(dev);
472         int speed;
473
474         speed = nct7802_read_fan(data, sattr->index);
475         if (speed < 0)
476                 return speed;
477
478         return sprintf(buf, "%d\n", speed);
479 }
480
481 static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr,
482                             char *buf)
483 {
484         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
485         struct nct7802_data *data = dev_get_drvdata(dev);
486         int speed;
487
488         speed = nct7802_read_fan_min(data, sattr->nr, sattr->index);
489         if (speed < 0)
490                 return speed;
491
492         return sprintf(buf, "%d\n", speed);
493 }
494
495 static ssize_t fan_min_store(struct device *dev,
496                              struct device_attribute *attr, const char *buf,
497                              size_t count)
498 {
499         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
500         struct nct7802_data *data = dev_get_drvdata(dev);
501         unsigned long val;
502         int err;
503
504         err = kstrtoul(buf, 10, &val);
505         if (err < 0)
506                 return err;
507
508         err = nct7802_write_fan_min(data, sattr->nr, sattr->index, val);
509         return err ? : count;
510 }
511
512 static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
513                           char *buf)
514 {
515         struct nct7802_data *data = dev_get_drvdata(dev);
516         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
517         int bit = sattr->index;
518         unsigned int val;
519         int ret;
520
521         ret = regmap_read(data->regmap, sattr->nr, &val);
522         if (ret < 0)
523                 return ret;
524
525         return sprintf(buf, "%u\n", !!(val & (1 << bit)));
526 }
527
528 static ssize_t
529 beep_show(struct device *dev, struct device_attribute *attr, char *buf)
530 {
531         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
532         struct nct7802_data *data = dev_get_drvdata(dev);
533         unsigned int regval;
534         int err;
535
536         err = regmap_read(data->regmap, sattr->nr, &regval);
537         if (err)
538                 return err;
539
540         return sprintf(buf, "%u\n", !!(regval & (1 << sattr->index)));
541 }
542
543 static ssize_t
544 beep_store(struct device *dev, struct device_attribute *attr, const char *buf,
545            size_t count)
546 {
547         struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
548         struct nct7802_data *data = dev_get_drvdata(dev);
549         unsigned long val;
550         int err;
551
552         err = kstrtoul(buf, 10, &val);
553         if (err < 0)
554                 return err;
555         if (val > 1)
556                 return -EINVAL;
557
558         err = regmap_update_bits(data->regmap, sattr->nr, 1 << sattr->index,
559                                  val ? 1 << sattr->index : 0);
560         return err ? : count;
561 }
562
563 static SENSOR_DEVICE_ATTR_RW(temp1_type, temp_type, 0);
564 static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, 0x01, REG_TEMP_LSB);
565 static SENSOR_DEVICE_ATTR_2_RW(temp1_min, temp, 0x31, 0);
566 static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0x30, 0);
567 static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0x3a, 0);
568
569 static SENSOR_DEVICE_ATTR_RW(temp2_type, temp_type, 1);
570 static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, 0x02, REG_TEMP_LSB);
571 static SENSOR_DEVICE_ATTR_2_RW(temp2_min, temp, 0x33, 0);
572 static SENSOR_DEVICE_ATTR_2_RW(temp2_max, temp, 0x32, 0);
573 static SENSOR_DEVICE_ATTR_2_RW(temp2_crit, temp, 0x3b, 0);
574
575 static SENSOR_DEVICE_ATTR_RW(temp3_type, temp_type, 2);
576 static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, 0x03, REG_TEMP_LSB);
577 static SENSOR_DEVICE_ATTR_2_RW(temp3_min, temp, 0x35, 0);
578 static SENSOR_DEVICE_ATTR_2_RW(temp3_max, temp, 0x34, 0);
579 static SENSOR_DEVICE_ATTR_2_RW(temp3_crit, temp, 0x3c, 0);
580
581 static SENSOR_DEVICE_ATTR_2_RO(temp4_input, temp, 0x04, 0);
582 static SENSOR_DEVICE_ATTR_2_RW(temp4_min, temp, 0x37, 0);
583 static SENSOR_DEVICE_ATTR_2_RW(temp4_max, temp, 0x36, 0);
584 static SENSOR_DEVICE_ATTR_2_RW(temp4_crit, temp, 0x3d, 0);
585
586 static SENSOR_DEVICE_ATTR_2_RO(temp5_input, temp, 0x06, REG_TEMP_PECI_LSB);
587 static SENSOR_DEVICE_ATTR_2_RW(temp5_min, temp, 0x39, 0);
588 static SENSOR_DEVICE_ATTR_2_RW(temp5_max, temp, 0x38, 0);
589 static SENSOR_DEVICE_ATTR_2_RW(temp5_crit, temp, 0x3e, 0);
590
591 static SENSOR_DEVICE_ATTR_2_RO(temp6_input, temp, 0x07, REG_TEMP_PECI_LSB);
592
593 static SENSOR_DEVICE_ATTR_2_RO(temp1_min_alarm, alarm, 0x18, 0);
594 static SENSOR_DEVICE_ATTR_2_RO(temp2_min_alarm, alarm, 0x18, 1);
595 static SENSOR_DEVICE_ATTR_2_RO(temp3_min_alarm, alarm, 0x18, 2);
596 static SENSOR_DEVICE_ATTR_2_RO(temp4_min_alarm, alarm, 0x18, 3);
597 static SENSOR_DEVICE_ATTR_2_RO(temp5_min_alarm, alarm, 0x18, 4);
598
599 static SENSOR_DEVICE_ATTR_2_RO(temp1_max_alarm, alarm, 0x19, 0);
600 static SENSOR_DEVICE_ATTR_2_RO(temp2_max_alarm, alarm, 0x19, 1);
601 static SENSOR_DEVICE_ATTR_2_RO(temp3_max_alarm, alarm, 0x19, 2);
602 static SENSOR_DEVICE_ATTR_2_RO(temp4_max_alarm, alarm, 0x19, 3);
603 static SENSOR_DEVICE_ATTR_2_RO(temp5_max_alarm, alarm, 0x19, 4);
604
605 static SENSOR_DEVICE_ATTR_2_RO(temp1_crit_alarm, alarm, 0x1b, 0);
606 static SENSOR_DEVICE_ATTR_2_RO(temp2_crit_alarm, alarm, 0x1b, 1);
607 static SENSOR_DEVICE_ATTR_2_RO(temp3_crit_alarm, alarm, 0x1b, 2);
608 static SENSOR_DEVICE_ATTR_2_RO(temp4_crit_alarm, alarm, 0x1b, 3);
609 static SENSOR_DEVICE_ATTR_2_RO(temp5_crit_alarm, alarm, 0x1b, 4);
610
611 static SENSOR_DEVICE_ATTR_2_RO(temp1_fault, alarm, 0x17, 0);
612 static SENSOR_DEVICE_ATTR_2_RO(temp2_fault, alarm, 0x17, 1);
613 static SENSOR_DEVICE_ATTR_2_RO(temp3_fault, alarm, 0x17, 2);
614
615 static SENSOR_DEVICE_ATTR_2_RW(temp1_beep, beep, 0x5c, 0);
616 static SENSOR_DEVICE_ATTR_2_RW(temp2_beep, beep, 0x5c, 1);
617 static SENSOR_DEVICE_ATTR_2_RW(temp3_beep, beep, 0x5c, 2);
618 static SENSOR_DEVICE_ATTR_2_RW(temp4_beep, beep, 0x5c, 3);
619 static SENSOR_DEVICE_ATTR_2_RW(temp5_beep, beep, 0x5c, 4);
620 static SENSOR_DEVICE_ATTR_2_RW(temp6_beep, beep, 0x5c, 5);
621
622 static struct attribute *nct7802_temp_attrs[] = {
623         &sensor_dev_attr_temp1_type.dev_attr.attr,
624         &sensor_dev_attr_temp1_input.dev_attr.attr,
625         &sensor_dev_attr_temp1_min.dev_attr.attr,
626         &sensor_dev_attr_temp1_max.dev_attr.attr,
627         &sensor_dev_attr_temp1_crit.dev_attr.attr,
628         &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
629         &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
630         &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
631         &sensor_dev_attr_temp1_fault.dev_attr.attr,
632         &sensor_dev_attr_temp1_beep.dev_attr.attr,
633
634         &sensor_dev_attr_temp2_type.dev_attr.attr,              /* 10 */
635         &sensor_dev_attr_temp2_input.dev_attr.attr,
636         &sensor_dev_attr_temp2_min.dev_attr.attr,
637         &sensor_dev_attr_temp2_max.dev_attr.attr,
638         &sensor_dev_attr_temp2_crit.dev_attr.attr,
639         &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
640         &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
641         &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
642         &sensor_dev_attr_temp2_fault.dev_attr.attr,
643         &sensor_dev_attr_temp2_beep.dev_attr.attr,
644
645         &sensor_dev_attr_temp3_type.dev_attr.attr,              /* 20 */
646         &sensor_dev_attr_temp3_input.dev_attr.attr,
647         &sensor_dev_attr_temp3_min.dev_attr.attr,
648         &sensor_dev_attr_temp3_max.dev_attr.attr,
649         &sensor_dev_attr_temp3_crit.dev_attr.attr,
650         &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
651         &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
652         &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
653         &sensor_dev_attr_temp3_fault.dev_attr.attr,
654         &sensor_dev_attr_temp3_beep.dev_attr.attr,
655
656         &sensor_dev_attr_temp4_input.dev_attr.attr,             /* 30 */
657         &sensor_dev_attr_temp4_min.dev_attr.attr,
658         &sensor_dev_attr_temp4_max.dev_attr.attr,
659         &sensor_dev_attr_temp4_crit.dev_attr.attr,
660         &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
661         &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
662         &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
663         &sensor_dev_attr_temp4_beep.dev_attr.attr,
664
665         &sensor_dev_attr_temp5_input.dev_attr.attr,             /* 38 */
666         &sensor_dev_attr_temp5_min.dev_attr.attr,
667         &sensor_dev_attr_temp5_max.dev_attr.attr,
668         &sensor_dev_attr_temp5_crit.dev_attr.attr,
669         &sensor_dev_attr_temp5_min_alarm.dev_attr.attr,
670         &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
671         &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
672         &sensor_dev_attr_temp5_beep.dev_attr.attr,
673
674         &sensor_dev_attr_temp6_input.dev_attr.attr,             /* 46 */
675         &sensor_dev_attr_temp6_beep.dev_attr.attr,
676
677         NULL
678 };
679
680 static umode_t nct7802_temp_is_visible(struct kobject *kobj,
681                                        struct attribute *attr, int index)
682 {
683         struct device *dev = kobj_to_dev(kobj);
684         struct nct7802_data *data = dev_get_drvdata(dev);
685         unsigned int reg;
686         int err;
687
688         err = regmap_read(data->regmap, REG_MODE, &reg);
689         if (err < 0)
690                 return 0;
691
692         if (index < 10 &&
693             (reg & 03) != 0x01 && (reg & 0x03) != 0x02)         /* RD1 */
694                 return 0;
695
696         if (index >= 10 && index < 20 &&
697             (reg & 0x0c) != 0x04 && (reg & 0x0c) != 0x08)       /* RD2 */
698                 return 0;
699         if (index >= 20 && index < 30 && (reg & 0x30) != 0x20)  /* RD3 */
700                 return 0;
701
702         if (index >= 30 && index < 38)                          /* local */
703                 return attr->mode;
704
705         err = regmap_read(data->regmap, REG_PECI_ENABLE, &reg);
706         if (err < 0)
707                 return 0;
708
709         if (index >= 38 && index < 46 && !(reg & 0x01))         /* PECI 0 */
710                 return 0;
711
712         if (index >= 46 && !(reg & 0x02))                       /* PECI 1 */
713                 return 0;
714
715         return attr->mode;
716 }
717
718 static const struct attribute_group nct7802_temp_group = {
719         .attrs = nct7802_temp_attrs,
720         .is_visible = nct7802_temp_is_visible,
721 };
722
723 static SENSOR_DEVICE_ATTR_2_RO(in0_input, in, 0, 0);
724 static SENSOR_DEVICE_ATTR_2_RW(in0_min, in, 0, 1);
725 static SENSOR_DEVICE_ATTR_2_RW(in0_max, in, 0, 2);
726 static SENSOR_DEVICE_ATTR_2_RO(in0_alarm, in_alarm, 0, 3);
727 static SENSOR_DEVICE_ATTR_2_RW(in0_beep, beep, 0x5a, 3);
728
729 static SENSOR_DEVICE_ATTR_2_RO(in1_input, in, 1, 0);
730
731 static SENSOR_DEVICE_ATTR_2_RO(in2_input, in, 2, 0);
732 static SENSOR_DEVICE_ATTR_2_RW(in2_min, in, 2, 1);
733 static SENSOR_DEVICE_ATTR_2_RW(in2_max, in, 2, 2);
734 static SENSOR_DEVICE_ATTR_2_RO(in2_alarm, in_alarm, 2, 0);
735 static SENSOR_DEVICE_ATTR_2_RW(in2_beep, beep, 0x5a, 0);
736
737 static SENSOR_DEVICE_ATTR_2_RO(in3_input, in, 3, 0);
738 static SENSOR_DEVICE_ATTR_2_RW(in3_min, in, 3, 1);
739 static SENSOR_DEVICE_ATTR_2_RW(in3_max, in, 3, 2);
740 static SENSOR_DEVICE_ATTR_2_RO(in3_alarm, in_alarm, 3, 1);
741 static SENSOR_DEVICE_ATTR_2_RW(in3_beep, beep, 0x5a, 1);
742
743 static SENSOR_DEVICE_ATTR_2_RO(in4_input, in, 4, 0);
744 static SENSOR_DEVICE_ATTR_2_RW(in4_min, in, 4, 1);
745 static SENSOR_DEVICE_ATTR_2_RW(in4_max, in, 4, 2);
746 static SENSOR_DEVICE_ATTR_2_RO(in4_alarm, in_alarm, 4, 2);
747 static SENSOR_DEVICE_ATTR_2_RW(in4_beep, beep, 0x5a, 2);
748
749 static struct attribute *nct7802_in_attrs[] = {
750         &sensor_dev_attr_in0_input.dev_attr.attr,
751         &sensor_dev_attr_in0_min.dev_attr.attr,
752         &sensor_dev_attr_in0_max.dev_attr.attr,
753         &sensor_dev_attr_in0_alarm.dev_attr.attr,
754         &sensor_dev_attr_in0_beep.dev_attr.attr,
755
756         &sensor_dev_attr_in1_input.dev_attr.attr,       /* 5 */
757
758         &sensor_dev_attr_in2_input.dev_attr.attr,       /* 6 */
759         &sensor_dev_attr_in2_min.dev_attr.attr,
760         &sensor_dev_attr_in2_max.dev_attr.attr,
761         &sensor_dev_attr_in2_alarm.dev_attr.attr,
762         &sensor_dev_attr_in2_beep.dev_attr.attr,
763
764         &sensor_dev_attr_in3_input.dev_attr.attr,       /* 11 */
765         &sensor_dev_attr_in3_min.dev_attr.attr,
766         &sensor_dev_attr_in3_max.dev_attr.attr,
767         &sensor_dev_attr_in3_alarm.dev_attr.attr,
768         &sensor_dev_attr_in3_beep.dev_attr.attr,
769
770         &sensor_dev_attr_in4_input.dev_attr.attr,       /* 16 */
771         &sensor_dev_attr_in4_min.dev_attr.attr,
772         &sensor_dev_attr_in4_max.dev_attr.attr,
773         &sensor_dev_attr_in4_alarm.dev_attr.attr,
774         &sensor_dev_attr_in4_beep.dev_attr.attr,
775
776         NULL,
777 };
778
779 static umode_t nct7802_in_is_visible(struct kobject *kobj,
780                                      struct attribute *attr, int index)
781 {
782         struct device *dev = kobj_to_dev(kobj);
783         struct nct7802_data *data = dev_get_drvdata(dev);
784         unsigned int reg;
785         int err;
786
787         if (index < 6)                                          /* VCC, VCORE */
788                 return attr->mode;
789
790         err = regmap_read(data->regmap, REG_MODE, &reg);
791         if (err < 0)
792                 return 0;
793
794         if (index >= 6 && index < 11 && (reg & 0x03) != 0x03)   /* VSEN1 */
795                 return 0;
796         if (index >= 11 && index < 16 && (reg & 0x0c) != 0x0c)  /* VSEN2 */
797                 return 0;
798         if (index >= 16 && (reg & 0x30) != 0x30)                /* VSEN3 */
799                 return 0;
800
801         return attr->mode;
802 }
803
804 static const struct attribute_group nct7802_in_group = {
805         .attrs = nct7802_in_attrs,
806         .is_visible = nct7802_in_is_visible,
807 };
808
809 static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0x10);
810 static SENSOR_DEVICE_ATTR_2_RW(fan1_min, fan_min, 0x49, 0x4c);
811 static SENSOR_DEVICE_ATTR_2_RO(fan1_alarm, alarm, 0x1a, 0);
812 static SENSOR_DEVICE_ATTR_2_RW(fan1_beep, beep, 0x5b, 0);
813 static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 0x11);
814 static SENSOR_DEVICE_ATTR_2_RW(fan2_min, fan_min, 0x4a, 0x4d);
815 static SENSOR_DEVICE_ATTR_2_RO(fan2_alarm, alarm, 0x1a, 1);
816 static SENSOR_DEVICE_ATTR_2_RW(fan2_beep, beep, 0x5b, 1);
817 static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 0x12);
818 static SENSOR_DEVICE_ATTR_2_RW(fan3_min, fan_min, 0x4b, 0x4e);
819 static SENSOR_DEVICE_ATTR_2_RO(fan3_alarm, alarm, 0x1a, 2);
820 static SENSOR_DEVICE_ATTR_2_RW(fan3_beep, beep, 0x5b, 2);
821
822 /* 7.2.89 Fan Control Output Type */
823 static SENSOR_DEVICE_ATTR_RO(pwm1_mode, pwm_mode, 0);
824 static SENSOR_DEVICE_ATTR_RO(pwm2_mode, pwm_mode, 1);
825 static SENSOR_DEVICE_ATTR_RO(pwm3_mode, pwm_mode, 2);
826
827 /* 7.2.91... Fan Control Output Value */
828 static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, REG_PWM(0));
829 static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, REG_PWM(1));
830 static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, REG_PWM(2));
831
832 /* 7.2.95... Temperature to Fan mapping Relationships Register */
833 static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_enable, 0);
834 static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_enable, 1);
835 static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_enable, 2);
836
837 static struct attribute *nct7802_fan_attrs[] = {
838         &sensor_dev_attr_fan1_input.dev_attr.attr,
839         &sensor_dev_attr_fan1_min.dev_attr.attr,
840         &sensor_dev_attr_fan1_alarm.dev_attr.attr,
841         &sensor_dev_attr_fan1_beep.dev_attr.attr,
842         &sensor_dev_attr_fan2_input.dev_attr.attr,
843         &sensor_dev_attr_fan2_min.dev_attr.attr,
844         &sensor_dev_attr_fan2_alarm.dev_attr.attr,
845         &sensor_dev_attr_fan2_beep.dev_attr.attr,
846         &sensor_dev_attr_fan3_input.dev_attr.attr,
847         &sensor_dev_attr_fan3_min.dev_attr.attr,
848         &sensor_dev_attr_fan3_alarm.dev_attr.attr,
849         &sensor_dev_attr_fan3_beep.dev_attr.attr,
850
851         NULL
852 };
853
854 static umode_t nct7802_fan_is_visible(struct kobject *kobj,
855                                       struct attribute *attr, int index)
856 {
857         struct device *dev = kobj_to_dev(kobj);
858         struct nct7802_data *data = dev_get_drvdata(dev);
859         int fan = index / 4;    /* 4 attributes per fan */
860         unsigned int reg;
861         int err;
862
863         err = regmap_read(data->regmap, REG_FAN_ENABLE, &reg);
864         if (err < 0 || !(reg & (1 << fan)))
865                 return 0;
866
867         return attr->mode;
868 }
869
870 static const struct attribute_group nct7802_fan_group = {
871         .attrs = nct7802_fan_attrs,
872         .is_visible = nct7802_fan_is_visible,
873 };
874
875 static struct attribute *nct7802_pwm_attrs[] = {
876         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
877         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
878         &sensor_dev_attr_pwm1.dev_attr.attr,
879         &sensor_dev_attr_pwm2_enable.dev_attr.attr,
880         &sensor_dev_attr_pwm2_mode.dev_attr.attr,
881         &sensor_dev_attr_pwm2.dev_attr.attr,
882         &sensor_dev_attr_pwm3_enable.dev_attr.attr,
883         &sensor_dev_attr_pwm3_mode.dev_attr.attr,
884         &sensor_dev_attr_pwm3.dev_attr.attr,
885         NULL
886 };
887
888 static const struct attribute_group nct7802_pwm_group = {
889         .attrs = nct7802_pwm_attrs,
890 };
891
892 /* 7.2.115... 0x80-0x83, 0x84 Temperature (X-axis) transition */
893 static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp, temp, 0x80, 0);
894 static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp, temp, 0x81, 0);
895 static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp, temp, 0x82, 0);
896 static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp, temp, 0x83, 0);
897 static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp, temp, 0x84, 0);
898
899 /* 7.2.120... 0x85-0x88 PWM (Y-axis) transition */
900 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_pwm, pwm, 0x85);
901 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm, 0x86);
902 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_pwm, pwm, 0x87);
903 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_pwm, pwm, 0x88);
904 static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point5_pwm, pwm, 0);
905
906 /* 7.2.124 Table 2 X-axis Transition Point 1 Register */
907 static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_temp, temp, 0x90, 0);
908 static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_temp, temp, 0x91, 0);
909 static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_temp, temp, 0x92, 0);
910 static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_temp, temp, 0x93, 0);
911 static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_temp, temp, 0x94, 0);
912
913 /* 7.2.129 Table 2 Y-axis Transition Point 1 Register */
914 static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_pwm, pwm, 0x95);
915 static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point2_pwm, pwm, 0x96);
916 static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point3_pwm, pwm, 0x97);
917 static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point4_pwm, pwm, 0x98);
918 static SENSOR_DEVICE_ATTR_RO(pwm2_auto_point5_pwm, pwm, 0);
919
920 /* 7.2.133 Table 3 X-axis Transition Point 1 Register */
921 static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point1_temp, temp, 0xA0, 0);
922 static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point2_temp, temp, 0xA1, 0);
923 static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point3_temp, temp, 0xA2, 0);
924 static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point4_temp, temp, 0xA3, 0);
925 static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point5_temp, temp, 0xA4, 0);
926
927 /* 7.2.138 Table 3 Y-axis Transition Point 1 Register */
928 static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_pwm, pwm, 0xA5);
929 static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point2_pwm, pwm, 0xA6);
930 static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point3_pwm, pwm, 0xA7);
931 static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point4_pwm, pwm, 0xA8);
932 static SENSOR_DEVICE_ATTR_RO(pwm3_auto_point5_pwm, pwm, 0);
933
934 static struct attribute *nct7802_auto_point_attrs[] = {
935         &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
936         &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
937         &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
938         &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
939         &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
940
941         &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
942         &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
943         &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
944         &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
945         &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
946
947         &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
948         &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
949         &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
950         &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
951         &sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr,
952
953         &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
954         &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
955         &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
956         &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
957         &sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr,
958
959         &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
960         &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
961         &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
962         &sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
963         &sensor_dev_attr_pwm3_auto_point5_temp.dev_attr.attr,
964
965         &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
966         &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
967         &sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
968         &sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
969         &sensor_dev_attr_pwm3_auto_point5_pwm.dev_attr.attr,
970
971         NULL
972 };
973
974 static const struct attribute_group nct7802_auto_point_group = {
975         .attrs = nct7802_auto_point_attrs,
976 };
977
978 static const struct attribute_group *nct7802_groups[] = {
979         &nct7802_temp_group,
980         &nct7802_in_group,
981         &nct7802_fan_group,
982         &nct7802_pwm_group,
983         &nct7802_auto_point_group,
984         NULL
985 };
986
987 static int nct7802_detect(struct i2c_client *client,
988                           struct i2c_board_info *info)
989 {
990         int reg;
991
992         /*
993          * Chip identification registers are only available in bank 0,
994          * so only attempt chip detection if bank 0 is selected
995          */
996         reg = i2c_smbus_read_byte_data(client, REG_BANK);
997         if (reg != 0x00)
998                 return -ENODEV;
999
1000         reg = i2c_smbus_read_byte_data(client, REG_VENDOR_ID);
1001         if (reg != 0x50)
1002                 return -ENODEV;
1003
1004         reg = i2c_smbus_read_byte_data(client, REG_CHIP_ID);
1005         if (reg != 0xc3)
1006                 return -ENODEV;
1007
1008         reg = i2c_smbus_read_byte_data(client, REG_VERSION_ID);
1009         if (reg < 0 || (reg & 0xf0) != 0x20)
1010                 return -ENODEV;
1011
1012         /* Also validate lower bits of voltage and temperature registers */
1013         reg = i2c_smbus_read_byte_data(client, REG_TEMP_LSB);
1014         if (reg < 0 || (reg & 0x1f))
1015                 return -ENODEV;
1016
1017         reg = i2c_smbus_read_byte_data(client, REG_TEMP_PECI_LSB);
1018         if (reg < 0 || (reg & 0x3f))
1019                 return -ENODEV;
1020
1021         reg = i2c_smbus_read_byte_data(client, REG_VOLTAGE_LOW);
1022         if (reg < 0 || (reg & 0x3f))
1023                 return -ENODEV;
1024
1025         strscpy(info->type, "nct7802", I2C_NAME_SIZE);
1026         return 0;
1027 }
1028
1029 static bool nct7802_regmap_is_volatile(struct device *dev, unsigned int reg)
1030 {
1031         return (reg != REG_BANK && reg <= 0x20) ||
1032                 (reg >= REG_PWM(0) && reg <= REG_PWM(2));
1033 }
1034
1035 static const struct regmap_config nct7802_regmap_config = {
1036         .reg_bits = 8,
1037         .val_bits = 8,
1038         .cache_type = REGCACHE_MAPLE,
1039         .volatile_reg = nct7802_regmap_is_volatile,
1040 };
1041
1042 static int nct7802_get_channel_config(struct device *dev,
1043                                       struct device_node *node, u8 *mode_mask,
1044                                       u8 *mode_val)
1045 {
1046         u32 reg;
1047         const char *type_str, *md_str;
1048         u8 md;
1049
1050         if (!node->name || of_node_cmp(node->name, "channel"))
1051                 return 0;
1052
1053         if (of_property_read_u32(node, "reg", &reg)) {
1054                 dev_err(dev, "Could not read reg value for '%s'\n",
1055                         node->full_name);
1056                 return -EINVAL;
1057         }
1058
1059         if (reg > 3) {
1060                 dev_err(dev, "Invalid reg (%u) in '%s'\n", reg,
1061                         node->full_name);
1062                 return -EINVAL;
1063         }
1064
1065         if (reg == 0) {
1066                 if (!of_device_is_available(node))
1067                         *mode_val &= ~MODE_LTD_EN;
1068                 else
1069                         *mode_val |= MODE_LTD_EN;
1070                 *mode_mask |= MODE_LTD_EN;
1071                 return 0;
1072         }
1073
1074         /* At this point we have reg >= 1 && reg <= 3 */
1075
1076         if (!of_device_is_available(node)) {
1077                 *mode_val &= ~(MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1));
1078                 *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
1079                 return 0;
1080         }
1081
1082         if (of_property_read_string(node, "sensor-type", &type_str)) {
1083                 dev_err(dev, "No type for '%s'\n", node->full_name);
1084                 return -EINVAL;
1085         }
1086
1087         if (!strcmp(type_str, "voltage")) {
1088                 *mode_val |= (RTD_MODE_VOLTAGE & MODE_RTD_MASK)
1089                              << MODE_BIT_OFFSET_RTD(reg - 1);
1090                 *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
1091                 return 0;
1092         }
1093
1094         if (strcmp(type_str, "temperature")) {
1095                 dev_err(dev, "Invalid type '%s' for '%s'\n", type_str,
1096                         node->full_name);
1097                 return -EINVAL;
1098         }
1099
1100         if (reg == 3) {
1101                 /* RTD3 only supports thermistor mode */
1102                 md = RTD_MODE_THERMISTOR;
1103         } else {
1104                 if (of_property_read_string(node, "temperature-mode",
1105                                             &md_str)) {
1106                         dev_err(dev, "No mode for '%s'\n", node->full_name);
1107                         return -EINVAL;
1108                 }
1109
1110                 if (!strcmp(md_str, "thermal-diode"))
1111                         md = RTD_MODE_CURRENT;
1112                 else if (!strcmp(md_str, "thermistor"))
1113                         md = RTD_MODE_THERMISTOR;
1114                 else {
1115                         dev_err(dev, "Invalid mode '%s' for '%s'\n", md_str,
1116                                 node->full_name);
1117                         return -EINVAL;
1118                 }
1119         }
1120
1121         *mode_val |= (md & MODE_RTD_MASK) << MODE_BIT_OFFSET_RTD(reg - 1);
1122         *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
1123
1124         return 0;
1125 }
1126
1127 static int nct7802_configure_channels(struct device *dev,
1128                                       struct nct7802_data *data)
1129 {
1130         /* Enable local temperature sensor by default */
1131         u8 mode_mask = MODE_LTD_EN, mode_val = MODE_LTD_EN;
1132         int err;
1133
1134         if (dev->of_node) {
1135                 for_each_child_of_node_scoped(dev->of_node, node) {
1136                         err = nct7802_get_channel_config(dev, node, &mode_mask,
1137                                                          &mode_val);
1138                         if (err)
1139                                 return err;
1140                 }
1141         }
1142
1143         return regmap_update_bits(data->regmap, REG_MODE, mode_mask, mode_val);
1144 }
1145
1146 static int nct7802_init_chip(struct device *dev, struct nct7802_data *data)
1147 {
1148         int err;
1149
1150         /* Enable ADC */
1151         err = regmap_update_bits(data->regmap, REG_START, 0x01, 0x01);
1152         if (err)
1153                 return err;
1154
1155         err = nct7802_configure_channels(dev, data);
1156         if (err)
1157                 return err;
1158
1159         /* Enable Vcore and VCC voltage monitoring */
1160         return regmap_update_bits(data->regmap, REG_VMON_ENABLE, 0x03, 0x03);
1161 }
1162
1163 static int nct7802_probe(struct i2c_client *client)
1164 {
1165         struct device *dev = &client->dev;
1166         struct nct7802_data *data;
1167         struct device *hwmon_dev;
1168         int ret;
1169
1170         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
1171         if (data == NULL)
1172                 return -ENOMEM;
1173
1174         data->regmap = devm_regmap_init_i2c(client, &nct7802_regmap_config);
1175         if (IS_ERR(data->regmap))
1176                 return PTR_ERR(data->regmap);
1177
1178         mutex_init(&data->access_lock);
1179         mutex_init(&data->in_alarm_lock);
1180
1181         ret = nct7802_init_chip(dev, data);
1182         if (ret < 0)
1183                 return ret;
1184
1185         hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
1186                                                            data,
1187                                                            nct7802_groups);
1188         return PTR_ERR_OR_ZERO(hwmon_dev);
1189 }
1190
1191 static const unsigned short nct7802_address_list[] = {
1192         0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
1193 };
1194
1195 static const struct i2c_device_id nct7802_idtable[] = {
1196         { "nct7802" },
1197         { }
1198 };
1199 MODULE_DEVICE_TABLE(i2c, nct7802_idtable);
1200
1201 static struct i2c_driver nct7802_driver = {
1202         .class = I2C_CLASS_HWMON,
1203         .driver = {
1204                 .name = DRVNAME,
1205         },
1206         .detect = nct7802_detect,
1207         .probe = nct7802_probe,
1208         .id_table = nct7802_idtable,
1209         .address_list = nct7802_address_list,
1210 };
1211
1212 module_i2c_driver(nct7802_driver);
1213
1214 MODULE_AUTHOR("Guenter Roeck <[email protected]>");
1215 MODULE_DESCRIPTION("NCT7802Y Hardware Monitoring Driver");
1216 MODULE_LICENSE("GPL v2");
This page took 0.095214 seconds and 4 git commands to generate.