]> Git Repo - J-linux.git/blob - drivers/gpu/drm/i915/display/intel_display_params.c
Merge tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
[J-linux.git] / drivers / gpu / drm / i915 / display / intel_display_params.c
1 // SPDX-License-Identifier: MIT
2 /*
3  * Copyright © 2023 Intel Corporation
4  */
5
6 #include "intel_display_params.h"
7 #include "i915_drv.h"
8
9 #define intel_display_param_named(name, T, perm, desc) \
10         module_param_named(name, intel_display_modparams.name, T, perm); \
11         MODULE_PARM_DESC(name, desc)
12 #define intel_display_param_named_unsafe(name, T, perm, desc) \
13         module_param_named_unsafe(name, intel_display_modparams.name, T, perm); \
14         MODULE_PARM_DESC(name, desc)
15
16 static struct intel_display_params intel_display_modparams __read_mostly = {
17 #define MEMBER(T, member, value, ...) .member = (value),
18         INTEL_DISPLAY_PARAMS_FOR_EACH(MEMBER)
19 #undef MEMBER
20 };
21 /*
22  * Note: As a rule, keep module parameter sysfs permissions read-only
23  * 0400. Runtime changes are only supported through i915 debugfs.
24  *
25  * For any exceptions requiring write access and runtime changes through module
26  * parameter sysfs, prevent debugfs file creation by setting the parameter's
27  * debugfs mode to 0.
28  */
29
30 intel_display_param_named_unsafe(dmc_firmware_path, charp, 0400,
31         "DMC firmware path to use instead of the default one. "
32         "Use /dev/null to disable DMC and runtime PM.");
33
34 intel_display_param_named_unsafe(vbt_firmware, charp, 0400,
35         "Load VBT from specified file under /lib/firmware");
36
37 intel_display_param_named_unsafe(lvds_channel_mode, int, 0400,
38          "Specify LVDS channel mode "
39          "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
40
41 intel_display_param_named_unsafe(panel_use_ssc, int, 0400,
42         "Use Spread Spectrum Clock with panels [LVDS/eDP] "
43         "(default: auto from VBT)");
44
45 intel_display_param_named_unsafe(vbt_sdvo_panel_type, int, 0400,
46         "Override/Ignore selection of SDVO panel mode in the VBT "
47         "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
48
49 intel_display_param_named_unsafe(enable_dc, int, 0400,
50         "Enable power-saving display C-states. "
51         "(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; "
52         "3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)");
53
54 intel_display_param_named_unsafe(enable_dpt, bool, 0400,
55         "Enable display page table (DPT) (default: true)");
56
57 intel_display_param_named_unsafe(enable_dsb, bool, 0400,
58         "Enable display state buffer (DSB) (default: true)");
59
60 intel_display_param_named_unsafe(enable_sagv, bool, 0400,
61         "Enable system agent voltage/frequency scaling (SAGV) (default: true)");
62
63 intel_display_param_named_unsafe(disable_power_well, int, 0400,
64         "Disable display power wells when possible "
65         "(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");
66
67 intel_display_param_named_unsafe(enable_ips, bool, 0400, "Enable IPS (default: true)");
68
69 intel_display_param_named_unsafe(invert_brightness, int, 0400,
70         "Invert backlight brightness "
71         "(-1 force normal, 0 machine defaults, 1 force inversion), please "
72         "report PCI device ID, subsystem vendor and subsystem device ID "
73         "to [email protected], if your machine needs it. "
74         "It will then be included in an upcoming module version.");
75
76 /* WA to get away with the default setting in VBT for early platforms.Will be removed */
77 intel_display_param_named_unsafe(edp_vswing, int, 0400,
78         "Ignore/Override vswing pre-emph table selection from VBT "
79         "(0=use value from vbt [default], 1=low power swing(200mV),"
80         "2=default swing(400mV))");
81
82 intel_display_param_named(enable_dpcd_backlight, int, 0400,
83         "Enable support for DPCD backlight control"
84         "(-1=use per-VBT LFP backlight type setting [default], 0=disabled, 1=enable, 2=force VESA interface, 3=force Intel interface)");
85
86 intel_display_param_named_unsafe(load_detect_test, bool, 0400,
87         "Force-enable the VGA load detect code for testing (default:false). "
88         "For developers only.");
89
90 intel_display_param_named_unsafe(force_reset_modeset_test, bool, 0400,
91         "Force a modeset during gpu reset for testing (default:false). "
92         "For developers only.");
93
94 intel_display_param_named(disable_display, bool, 0400,
95         "Disable display (default: false)");
96
97 intel_display_param_named(verbose_state_checks, bool, 0400,
98         "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
99
100 intel_display_param_named_unsafe(nuclear_pageflip, bool, 0400,
101         "Force enable atomic functionality on platforms that don't have full support yet.");
102
103 intel_display_param_named_unsafe(enable_dp_mst, bool, 0400,
104         "Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)");
105
106 intel_display_param_named_unsafe(enable_fbc, int, 0400,
107         "Enable frame buffer compression for power savings "
108         "(default: -1 (use per-chip default))");
109
110 intel_display_param_named_unsafe(enable_psr, int, 0400,
111         "Enable PSR "
112         "(0=disabled, 1=enable up to PSR1, 2=enable up to PSR2) "
113         "Default: -1 (use per-chip default)");
114
115 intel_display_param_named(psr_safest_params, bool, 0400,
116         "Replace PSR VBT parameters by the safest and not optimal ones. This "
117         "is helpful to detect if PSR issues are related to bad values set in "
118         " VBT. (0=use VBT parameters, 1=use safest parameters)"
119         "Default: 0");
120
121 intel_display_param_named_unsafe(enable_psr2_sel_fetch, bool, 0400,
122         "Enable PSR2 and Panel Replay selective fetch "
123         "(0=disabled, 1=enabled) "
124         "Default: 1");
125
126 intel_display_param_named_unsafe(enable_dmc_wl, bool, 0400,
127         "Enable DMC wakelock "
128         "(0=disabled, 1=enabled) "
129         "Default: 0");
130
131 __maybe_unused
132 static void _param_print_bool(struct drm_printer *p, const char *driver_name,
133                               const char *name, bool val)
134 {
135         drm_printf(p, "%s.%s=%s\n", driver_name, name, str_yes_no(val));
136 }
137
138 __maybe_unused
139 static void _param_print_int(struct drm_printer *p, const char *driver_name,
140                              const char *name, int val)
141 {
142         drm_printf(p, "%s.%s=%d\n", driver_name, name, val);
143 }
144
145 __maybe_unused
146 static void _param_print_uint(struct drm_printer *p, const char *driver_name,
147                               const char *name, unsigned int val)
148 {
149         drm_printf(p, "%s.%s=%u\n", driver_name, name, val);
150 }
151
152 __maybe_unused
153 static void _param_print_ulong(struct drm_printer *p, const char *driver_name,
154                                const char *name, unsigned long val)
155 {
156         drm_printf(p, "%s.%s=%lu\n", driver_name, name, val);
157 }
158
159 __maybe_unused
160 static void _param_print_charp(struct drm_printer *p, const char *driver_name,
161                                const char *name, const char *val)
162 {
163         drm_printf(p, "%s.%s=%s\n", driver_name, name, val);
164 }
165
166 #define _param_print(p, driver_name, name, val)                 \
167         _Generic(val,                                           \
168                  bool : _param_print_bool,                      \
169                  int : _param_print_int,                        \
170                  unsigned int : _param_print_uint,              \
171                  unsigned long : _param_print_ulong,            \
172                  char * : _param_print_charp)(p, driver_name, name, val)
173
174 /**
175  * intel_display_params_dump - dump intel display modparams
176  * @params: display params
177  * @driver_name: driver name to use for printing
178  * @p: the &drm_printer
179  *
180  * Pretty printer for i915 modparams.
181  */
182 void intel_display_params_dump(const struct intel_display_params *params,
183                                const char *driver_name, struct drm_printer *p)
184 {
185 #define PRINT(T, x, ...) _param_print(p, driver_name, #x, params->x);
186         INTEL_DISPLAY_PARAMS_FOR_EACH(PRINT);
187 #undef PRINT
188 }
189
190 __maybe_unused static void _param_dup_charp(char **valp)
191 {
192         *valp = kstrdup(*valp ? *valp : "", GFP_ATOMIC);
193 }
194
195 __maybe_unused static void _param_nop(void *valp)
196 {
197 }
198
199 #define _param_dup(valp)                                \
200         _Generic(valp,                                  \
201                  char ** : _param_dup_charp,            \
202                  default : _param_nop)                  \
203                 (valp)
204
205 void intel_display_params_copy(struct intel_display_params *dest)
206 {
207         *dest = intel_display_modparams;
208 #define DUP(T, x, ...) _param_dup(&dest->x);
209         INTEL_DISPLAY_PARAMS_FOR_EACH(DUP);
210 #undef DUP
211 }
212
213 __maybe_unused static void _param_free_charp(char **valp)
214 {
215         kfree(*valp);
216         *valp = NULL;
217 }
218
219 #define _param_free(valp)                               \
220         _Generic(valp,                                  \
221                  char ** : _param_free_charp,           \
222                  default : _param_nop)                  \
223                 (valp)
224
225 /* free the allocated members, *not* the passed in params itself */
226 void intel_display_params_free(struct intel_display_params *params)
227 {
228 #define FREE(T, x, ...) _param_free(&params->x);
229         INTEL_DISPLAY_PARAMS_FOR_EACH(FREE);
230 #undef FREE
231 }
This page took 0.041548 seconds and 4 git commands to generate.