]> Git Repo - J-linux.git/blob - drivers/dma/loongson2-apb-dma.c
Merge tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
[J-linux.git] / drivers / dma / loongson2-apb-dma.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Driver for the Loongson-2 APB DMA Controller
4  *
5  * Copyright (C) 2017-2023 Loongson Corporation
6  */
7
8 #include <linux/clk.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/dmapool.h>
11 #include <linux/interrupt.h>
12 #include <linux/io.h>
13 #include <linux/io-64-nonatomic-lo-hi.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/of_dma.h>
17 #include <linux/platform_device.h>
18 #include <linux/slab.h>
19
20 #include "dmaengine.h"
21 #include "virt-dma.h"
22
23 /* Global Configuration Register */
24 #define LDMA_ORDER_ERG          0x0
25
26 /* Bitfield definitions */
27
28 /* Bitfields in Global Configuration Register */
29 #define LDMA_64BIT_EN           BIT(0) /* 1: 64 bit support */
30 #define LDMA_UNCOHERENT_EN      BIT(1) /* 0: cache, 1: uncache */
31 #define LDMA_ASK_VALID          BIT(2)
32 #define LDMA_START              BIT(3) /* DMA start operation */
33 #define LDMA_STOP               BIT(4) /* DMA stop operation */
34 #define LDMA_CONFIG_MASK        GENMASK_ULL(4, 0) /* DMA controller config bits mask */
35
36 /* Bitfields in ndesc_addr field of HW descriptor */
37 #define LDMA_DESC_EN            BIT(0) /*1: The next descriptor is valid */
38 #define LDMA_DESC_ADDR_LOW      GENMASK(31, 1)
39
40 /* Bitfields in cmd field of HW descriptor */
41 #define LDMA_INT                BIT(1) /* Enable DMA interrupts */
42 #define LDMA_DATA_DIRECTION     BIT(12) /* 1: write to device, 0: read from device */
43
44 #define LDMA_SLAVE_BUSWIDTHS    (BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
45                                  BIT(DMA_SLAVE_BUSWIDTH_8_BYTES))
46
47 #define LDMA_MAX_TRANS_LEN      U32_MAX
48
49 /*--  descriptors  -----------------------------------------------------*/
50
51 /*
52  * struct ls2x_dma_hw_desc - DMA HW descriptor
53  * @ndesc_addr: the next descriptor low address.
54  * @mem_addr: memory low address.
55  * @apb_addr: device buffer address.
56  * @len: length of a piece of carried content, in words.
57  * @step_len: length between two moved memory data blocks.
58  * @step_times: number of blocks to be carried in a single DMA operation.
59  * @cmd: descriptor command or state.
60  * @stats: DMA status.
61  * @high_ndesc_addr: the next descriptor high address.
62  * @high_mem_addr: memory high address.
63  * @reserved: reserved
64  */
65 struct ls2x_dma_hw_desc {
66         u32 ndesc_addr;
67         u32 mem_addr;
68         u32 apb_addr;
69         u32 len;
70         u32 step_len;
71         u32 step_times;
72         u32 cmd;
73         u32 stats;
74         u32 high_ndesc_addr;
75         u32 high_mem_addr;
76         u32 reserved[2];
77 } __packed;
78
79 /*
80  * struct ls2x_dma_sg - ls2x dma scatter gather entry
81  * @hw: the pointer to DMA HW descriptor.
82  * @llp: physical address of the DMA HW descriptor.
83  * @phys: destination or source address(mem).
84  * @len: number of Bytes to read.
85  */
86 struct ls2x_dma_sg {
87         struct ls2x_dma_hw_desc *hw;
88         dma_addr_t              llp;
89         dma_addr_t              phys;
90         u32                     len;
91 };
92
93 /*
94  * struct ls2x_dma_desc - software descriptor
95  * @vdesc: pointer to the virtual dma descriptor.
96  * @cyclic: flag to dma cyclic
97  * @burst_size: burst size of transaction, in words.
98  * @desc_num: number of sg entries.
99  * @direction: transfer direction, to or from device.
100  * @status: dma controller status.
101  * @sg: array of sgs.
102  */
103 struct ls2x_dma_desc {
104         struct virt_dma_desc            vdesc;
105         bool                            cyclic;
106         size_t                          burst_size;
107         u32                             desc_num;
108         enum dma_transfer_direction     direction;
109         enum dma_status                 status;
110         struct ls2x_dma_sg              sg[] __counted_by(desc_num);
111 };
112
113 /*--  Channels  --------------------------------------------------------*/
114
115 /*
116  * struct ls2x_dma_chan - internal representation of an LS2X APB DMA channel
117  * @vchan: virtual dma channel entry.
118  * @desc: pointer to the ls2x sw dma descriptor.
119  * @pool: hw desc table
120  * @irq: irq line
121  * @sconfig: configuration for slave transfers, passed via .device_config
122  */
123 struct ls2x_dma_chan {
124         struct virt_dma_chan    vchan;
125         struct ls2x_dma_desc    *desc;
126         void                    *pool;
127         int                     irq;
128         struct dma_slave_config sconfig;
129 };
130
131 /*--  Controller  ------------------------------------------------------*/
132
133 /*
134  * struct ls2x_dma_priv - LS2X APB DMAC specific information
135  * @ddev: dmaengine dma_device object members
136  * @dma_clk: DMAC clock source
137  * @regs: memory mapped register base
138  * @lchan: channel to store ls2x_dma_chan structures
139  */
140 struct ls2x_dma_priv {
141         struct dma_device       ddev;
142         struct clk              *dma_clk;
143         void __iomem            *regs;
144         struct ls2x_dma_chan    lchan;
145 };
146
147 /*--  Helper functions  ------------------------------------------------*/
148
149 static inline struct ls2x_dma_desc *to_ldma_desc(struct virt_dma_desc *vdesc)
150 {
151         return container_of(vdesc, struct ls2x_dma_desc, vdesc);
152 }
153
154 static inline struct ls2x_dma_chan *to_ldma_chan(struct dma_chan *chan)
155 {
156         return container_of(chan, struct ls2x_dma_chan, vchan.chan);
157 }
158
159 static inline struct ls2x_dma_priv *to_ldma_priv(struct dma_device *ddev)
160 {
161         return container_of(ddev, struct ls2x_dma_priv, ddev);
162 }
163
164 static struct device *chan2dev(struct dma_chan *chan)
165 {
166         return &chan->dev->device;
167 }
168
169 static void ls2x_dma_desc_free(struct virt_dma_desc *vdesc)
170 {
171         struct ls2x_dma_chan *lchan = to_ldma_chan(vdesc->tx.chan);
172         struct ls2x_dma_desc *desc = to_ldma_desc(vdesc);
173         int i;
174
175         for (i = 0; i < desc->desc_num; i++) {
176                 if (desc->sg[i].hw)
177                         dma_pool_free(lchan->pool, desc->sg[i].hw,
178                                       desc->sg[i].llp);
179         }
180
181         kfree(desc);
182 }
183
184 static void ls2x_dma_write_cmd(struct ls2x_dma_chan *lchan, bool cmd)
185 {
186         struct ls2x_dma_priv *priv = to_ldma_priv(lchan->vchan.chan.device);
187         u64 val;
188
189         val = lo_hi_readq(priv->regs + LDMA_ORDER_ERG) & ~LDMA_CONFIG_MASK;
190         val |= LDMA_64BIT_EN | cmd;
191         lo_hi_writeq(val, priv->regs + LDMA_ORDER_ERG);
192 }
193
194 static void ls2x_dma_start_transfer(struct ls2x_dma_chan *lchan)
195 {
196         struct ls2x_dma_priv *priv = to_ldma_priv(lchan->vchan.chan.device);
197         struct ls2x_dma_sg *ldma_sg;
198         struct virt_dma_desc *vdesc;
199         u64 val;
200
201         /* Get the next descriptor */
202         vdesc = vchan_next_desc(&lchan->vchan);
203         if (!vdesc) {
204                 lchan->desc = NULL;
205                 return;
206         }
207
208         list_del(&vdesc->node);
209         lchan->desc = to_ldma_desc(vdesc);
210         ldma_sg = &lchan->desc->sg[0];
211
212         /* Start DMA */
213         lo_hi_writeq(0, priv->regs + LDMA_ORDER_ERG);
214         val = (ldma_sg->llp & ~LDMA_CONFIG_MASK) | LDMA_64BIT_EN | LDMA_START;
215         lo_hi_writeq(val, priv->regs + LDMA_ORDER_ERG);
216 }
217
218 static size_t ls2x_dmac_detect_burst(struct ls2x_dma_chan *lchan)
219 {
220         u32 maxburst, buswidth;
221
222         /* Reject definitely invalid configurations */
223         if ((lchan->sconfig.src_addr_width & LDMA_SLAVE_BUSWIDTHS) &&
224             (lchan->sconfig.dst_addr_width & LDMA_SLAVE_BUSWIDTHS))
225                 return 0;
226
227         if (lchan->sconfig.direction == DMA_MEM_TO_DEV) {
228                 maxburst = lchan->sconfig.dst_maxburst;
229                 buswidth = lchan->sconfig.dst_addr_width;
230         } else {
231                 maxburst = lchan->sconfig.src_maxburst;
232                 buswidth = lchan->sconfig.src_addr_width;
233         }
234
235         /* If maxburst is zero, fallback to LDMA_MAX_TRANS_LEN */
236         return maxburst ? (maxburst * buswidth) >> 2 : LDMA_MAX_TRANS_LEN;
237 }
238
239 static void ls2x_dma_fill_desc(struct ls2x_dma_chan *lchan, u32 sg_index,
240                                struct ls2x_dma_desc *desc)
241 {
242         struct ls2x_dma_sg *ldma_sg = &desc->sg[sg_index];
243         u32 num_segments, segment_size;
244
245         if (desc->direction == DMA_MEM_TO_DEV) {
246                 ldma_sg->hw->cmd = LDMA_INT | LDMA_DATA_DIRECTION;
247                 ldma_sg->hw->apb_addr = lchan->sconfig.dst_addr;
248         } else {
249                 ldma_sg->hw->cmd = LDMA_INT;
250                 ldma_sg->hw->apb_addr = lchan->sconfig.src_addr;
251         }
252
253         ldma_sg->hw->mem_addr = lower_32_bits(ldma_sg->phys);
254         ldma_sg->hw->high_mem_addr = upper_32_bits(ldma_sg->phys);
255
256         /* Split into multiple equally sized segments if necessary */
257         num_segments = DIV_ROUND_UP((ldma_sg->len + 3) >> 2, desc->burst_size);
258         segment_size = DIV_ROUND_UP((ldma_sg->len + 3) >> 2, num_segments);
259
260         /* Word count register takes input in words */
261         ldma_sg->hw->len = segment_size;
262         ldma_sg->hw->step_times = num_segments;
263         ldma_sg->hw->step_len = 0;
264
265         /* lets make a link list */
266         if (sg_index) {
267                 desc->sg[sg_index - 1].hw->ndesc_addr = ldma_sg->llp | LDMA_DESC_EN;
268                 desc->sg[sg_index - 1].hw->high_ndesc_addr = upper_32_bits(ldma_sg->llp);
269         }
270 }
271
272 /*--  DMA Engine API  --------------------------------------------------*/
273
274 /*
275  * ls2x_dma_alloc_chan_resources - allocate resources for DMA channel
276  * @chan: allocate descriptor resources for this channel
277  *
278  * return - the number of allocated descriptors
279  */
280 static int ls2x_dma_alloc_chan_resources(struct dma_chan *chan)
281 {
282         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
283
284         /* Create a pool of consistent memory blocks for hardware descriptors */
285         lchan->pool = dma_pool_create(dev_name(chan2dev(chan)),
286                                       chan->device->dev, PAGE_SIZE,
287                                       __alignof__(struct ls2x_dma_hw_desc), 0);
288         if (!lchan->pool) {
289                 dev_err(chan2dev(chan), "No memory for descriptors\n");
290                 return -ENOMEM;
291         }
292
293         return 1;
294 }
295
296 /*
297  * ls2x_dma_free_chan_resources - free all channel resources
298  * @chan: DMA channel
299  */
300 static void ls2x_dma_free_chan_resources(struct dma_chan *chan)
301 {
302         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
303
304         vchan_free_chan_resources(to_virt_chan(chan));
305         dma_pool_destroy(lchan->pool);
306         lchan->pool = NULL;
307 }
308
309 /*
310  * ls2x_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
311  * @chan: DMA channel
312  * @sgl: scatterlist to transfer to/from
313  * @sg_len: number of entries in @scatterlist
314  * @direction: DMA direction
315  * @flags: tx descriptor status flags
316  * @context: transaction context (ignored)
317  *
318  * Return: Async transaction descriptor on success and NULL on failure
319  */
320 static struct dma_async_tx_descriptor *
321 ls2x_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
322                        u32 sg_len, enum dma_transfer_direction direction,
323                        unsigned long flags, void *context)
324 {
325         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
326         struct ls2x_dma_desc *desc;
327         struct scatterlist *sg;
328         size_t burst_size;
329         int i;
330
331         if (unlikely(!sg_len || !is_slave_direction(direction)))
332                 return NULL;
333
334         burst_size = ls2x_dmac_detect_burst(lchan);
335         if (!burst_size)
336                 return NULL;
337
338         desc = kzalloc(struct_size(desc, sg, sg_len), GFP_NOWAIT);
339         if (!desc)
340                 return NULL;
341
342         desc->desc_num = sg_len;
343         desc->direction = direction;
344         desc->burst_size = burst_size;
345
346         for_each_sg(sgl, sg, sg_len, i) {
347                 struct ls2x_dma_sg *ldma_sg = &desc->sg[i];
348
349                 /* Allocate DMA capable memory for hardware descriptor */
350                 ldma_sg->hw = dma_pool_alloc(lchan->pool, GFP_NOWAIT, &ldma_sg->llp);
351                 if (!ldma_sg->hw) {
352                         desc->desc_num = i;
353                         ls2x_dma_desc_free(&desc->vdesc);
354                         return NULL;
355                 }
356
357                 ldma_sg->phys = sg_dma_address(sg);
358                 ldma_sg->len = sg_dma_len(sg);
359
360                 ls2x_dma_fill_desc(lchan, i, desc);
361         }
362
363         /* Setting the last descriptor enable bit */
364         desc->sg[sg_len - 1].hw->ndesc_addr &= ~LDMA_DESC_EN;
365         desc->status = DMA_IN_PROGRESS;
366
367         return vchan_tx_prep(&lchan->vchan, &desc->vdesc, flags);
368 }
369
370 /*
371  * ls2x_dma_prep_dma_cyclic - prepare the cyclic DMA transfer
372  * @chan: the DMA channel to prepare
373  * @buf_addr: physical DMA address where the buffer starts
374  * @buf_len: total number of bytes for the entire buffer
375  * @period_len: number of bytes for each period
376  * @direction: transfer direction, to or from device
377  * @flags: tx descriptor status flags
378  *
379  * Return: Async transaction descriptor on success and NULL on failure
380  */
381 static struct dma_async_tx_descriptor *
382 ls2x_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
383                          size_t period_len, enum dma_transfer_direction direction,
384                          unsigned long flags)
385 {
386         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
387         struct ls2x_dma_desc *desc;
388         size_t burst_size;
389         u32 num_periods;
390         int i;
391
392         if (unlikely(!buf_len || !period_len))
393                 return NULL;
394
395         if (unlikely(!is_slave_direction(direction)))
396                 return NULL;
397
398         burst_size = ls2x_dmac_detect_burst(lchan);
399         if (!burst_size)
400                 return NULL;
401
402         num_periods = buf_len / period_len;
403         desc = kzalloc(struct_size(desc, sg, num_periods), GFP_NOWAIT);
404         if (!desc)
405                 return NULL;
406
407         desc->desc_num = num_periods;
408         desc->direction = direction;
409         desc->burst_size = burst_size;
410
411         /* Build cyclic linked list */
412         for (i = 0; i < num_periods; i++) {
413                 struct ls2x_dma_sg *ldma_sg = &desc->sg[i];
414
415                 /* Allocate DMA capable memory for hardware descriptor */
416                 ldma_sg->hw = dma_pool_alloc(lchan->pool, GFP_NOWAIT, &ldma_sg->llp);
417                 if (!ldma_sg->hw) {
418                         desc->desc_num = i;
419                         ls2x_dma_desc_free(&desc->vdesc);
420                         return NULL;
421                 }
422
423                 ldma_sg->phys = buf_addr + period_len * i;
424                 ldma_sg->len = period_len;
425
426                 ls2x_dma_fill_desc(lchan, i, desc);
427         }
428
429         /* Lets make a cyclic list */
430         desc->sg[num_periods - 1].hw->ndesc_addr = desc->sg[0].llp | LDMA_DESC_EN;
431         desc->sg[num_periods - 1].hw->high_ndesc_addr = upper_32_bits(desc->sg[0].llp);
432         desc->cyclic = true;
433         desc->status = DMA_IN_PROGRESS;
434
435         return vchan_tx_prep(&lchan->vchan, &desc->vdesc, flags);
436 }
437
438 /*
439  * ls2x_slave_config - set slave configuration for channel
440  * @chan: dma channel
441  * @cfg: slave configuration
442  *
443  * Sets slave configuration for channel
444  */
445 static int ls2x_dma_slave_config(struct dma_chan *chan,
446                                  struct dma_slave_config *config)
447 {
448         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
449
450         memcpy(&lchan->sconfig, config, sizeof(*config));
451         return 0;
452 }
453
454 /*
455  * ls2x_dma_issue_pending - push pending transactions to the hardware
456  * @chan: channel
457  *
458  * When this function is called, all pending transactions are pushed to the
459  * hardware and executed.
460  */
461 static void ls2x_dma_issue_pending(struct dma_chan *chan)
462 {
463         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
464         unsigned long flags;
465
466         spin_lock_irqsave(&lchan->vchan.lock, flags);
467         if (vchan_issue_pending(&lchan->vchan) && !lchan->desc)
468                 ls2x_dma_start_transfer(lchan);
469         spin_unlock_irqrestore(&lchan->vchan.lock, flags);
470 }
471
472 /*
473  * ls2x_dma_terminate_all - terminate all transactions
474  * @chan: channel
475  *
476  * Stops all DMA transactions.
477  */
478 static int ls2x_dma_terminate_all(struct dma_chan *chan)
479 {
480         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
481         unsigned long flags;
482         LIST_HEAD(head);
483
484         spin_lock_irqsave(&lchan->vchan.lock, flags);
485         /* Setting stop cmd */
486         ls2x_dma_write_cmd(lchan, LDMA_STOP);
487         if (lchan->desc) {
488                 vchan_terminate_vdesc(&lchan->desc->vdesc);
489                 lchan->desc = NULL;
490         }
491
492         vchan_get_all_descriptors(&lchan->vchan, &head);
493         spin_unlock_irqrestore(&lchan->vchan.lock, flags);
494
495         vchan_dma_desc_free_list(&lchan->vchan, &head);
496         return 0;
497 }
498
499 /*
500  * ls2x_dma_synchronize - Synchronizes the termination of transfers to the
501  * current context.
502  * @chan: channel
503  */
504 static void ls2x_dma_synchronize(struct dma_chan *chan)
505 {
506         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
507
508         vchan_synchronize(&lchan->vchan);
509 }
510
511 static int ls2x_dma_pause(struct dma_chan *chan)
512 {
513         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
514         unsigned long flags;
515
516         spin_lock_irqsave(&lchan->vchan.lock, flags);
517         if (lchan->desc && lchan->desc->status == DMA_IN_PROGRESS) {
518                 ls2x_dma_write_cmd(lchan, LDMA_STOP);
519                 lchan->desc->status = DMA_PAUSED;
520         }
521         spin_unlock_irqrestore(&lchan->vchan.lock, flags);
522
523         return 0;
524 }
525
526 static int ls2x_dma_resume(struct dma_chan *chan)
527 {
528         struct ls2x_dma_chan *lchan = to_ldma_chan(chan);
529         unsigned long flags;
530
531         spin_lock_irqsave(&lchan->vchan.lock, flags);
532         if (lchan->desc && lchan->desc->status == DMA_PAUSED) {
533                 lchan->desc->status = DMA_IN_PROGRESS;
534                 ls2x_dma_write_cmd(lchan, LDMA_START);
535         }
536         spin_unlock_irqrestore(&lchan->vchan.lock, flags);
537
538         return 0;
539 }
540
541 /*
542  * ls2x_dma_isr - LS2X DMA Interrupt handler
543  * @irq: IRQ number
544  * @dev_id: Pointer to ls2x_dma_chan
545  *
546  * Return: IRQ_HANDLED/IRQ_NONE
547  */
548 static irqreturn_t ls2x_dma_isr(int irq, void *dev_id)
549 {
550         struct ls2x_dma_chan *lchan = dev_id;
551         struct ls2x_dma_desc *desc;
552
553         spin_lock(&lchan->vchan.lock);
554         desc = lchan->desc;
555         if (desc) {
556                 if (desc->cyclic) {
557                         vchan_cyclic_callback(&desc->vdesc);
558                 } else {
559                         desc->status = DMA_COMPLETE;
560                         vchan_cookie_complete(&desc->vdesc);
561                         ls2x_dma_start_transfer(lchan);
562                 }
563
564                 /* ls2x_dma_start_transfer() updates lchan->desc */
565                 if (!lchan->desc)
566                         ls2x_dma_write_cmd(lchan, LDMA_STOP);
567         }
568         spin_unlock(&lchan->vchan.lock);
569
570         return IRQ_HANDLED;
571 }
572
573 static int ls2x_dma_chan_init(struct platform_device *pdev,
574                               struct ls2x_dma_priv *priv)
575 {
576         struct ls2x_dma_chan *lchan = &priv->lchan;
577         struct device *dev = &pdev->dev;
578         int ret;
579
580         lchan->irq = platform_get_irq(pdev, 0);
581         if (lchan->irq < 0)
582                 return lchan->irq;
583
584         ret = devm_request_irq(dev, lchan->irq, ls2x_dma_isr, IRQF_TRIGGER_RISING,
585                                dev_name(&pdev->dev), lchan);
586         if (ret)
587                 return ret;
588
589         /* Initialize channels related values */
590         INIT_LIST_HEAD(&priv->ddev.channels);
591         lchan->vchan.desc_free = ls2x_dma_desc_free;
592         vchan_init(&lchan->vchan, &priv->ddev);
593
594         return 0;
595 }
596
597 /*
598  * ls2x_dma_probe - Driver probe function
599  * @pdev: Pointer to the platform_device structure
600  *
601  * Return: '0' on success and failure value on error
602  */
603 static int ls2x_dma_probe(struct platform_device *pdev)
604 {
605         struct device *dev = &pdev->dev;
606         struct ls2x_dma_priv *priv;
607         struct dma_device *ddev;
608         int ret;
609
610         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
611         if (!priv)
612                 return -ENOMEM;
613
614         priv->regs = devm_platform_ioremap_resource(pdev, 0);
615         if (IS_ERR(priv->regs))
616                 return dev_err_probe(dev, PTR_ERR(priv->regs),
617                                      "devm_platform_ioremap_resource failed.\n");
618
619         priv->dma_clk = devm_clk_get(&pdev->dev, NULL);
620         if (IS_ERR(priv->dma_clk))
621                 return dev_err_probe(dev, PTR_ERR(priv->dma_clk), "devm_clk_get failed.\n");
622
623         ret = clk_prepare_enable(priv->dma_clk);
624         if (ret)
625                 return dev_err_probe(dev, ret, "clk_prepare_enable failed.\n");
626
627         ret = ls2x_dma_chan_init(pdev, priv);
628         if (ret)
629                 goto disable_clk;
630
631         ddev = &priv->ddev;
632         ddev->dev = dev;
633         dma_cap_zero(ddev->cap_mask);
634         dma_cap_set(DMA_SLAVE, ddev->cap_mask);
635         dma_cap_set(DMA_CYCLIC, ddev->cap_mask);
636
637         ddev->device_alloc_chan_resources = ls2x_dma_alloc_chan_resources;
638         ddev->device_free_chan_resources = ls2x_dma_free_chan_resources;
639         ddev->device_tx_status = dma_cookie_status;
640         ddev->device_issue_pending = ls2x_dma_issue_pending;
641         ddev->device_prep_slave_sg = ls2x_dma_prep_slave_sg;
642         ddev->device_prep_dma_cyclic = ls2x_dma_prep_dma_cyclic;
643         ddev->device_config = ls2x_dma_slave_config;
644         ddev->device_terminate_all = ls2x_dma_terminate_all;
645         ddev->device_synchronize = ls2x_dma_synchronize;
646         ddev->device_pause = ls2x_dma_pause;
647         ddev->device_resume = ls2x_dma_resume;
648
649         ddev->src_addr_widths = LDMA_SLAVE_BUSWIDTHS;
650         ddev->dst_addr_widths = LDMA_SLAVE_BUSWIDTHS;
651         ddev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
652
653         ret = dma_async_device_register(&priv->ddev);
654         if (ret < 0)
655                 goto disable_clk;
656
657         ret = of_dma_controller_register(dev->of_node, of_dma_xlate_by_chan_id, priv);
658         if (ret < 0)
659                 goto unregister_dmac;
660
661         platform_set_drvdata(pdev, priv);
662
663         dev_info(dev, "Loongson LS2X APB DMA driver registered successfully.\n");
664         return 0;
665
666 unregister_dmac:
667         dma_async_device_unregister(&priv->ddev);
668 disable_clk:
669         clk_disable_unprepare(priv->dma_clk);
670
671         return ret;
672 }
673
674 /*
675  * ls2x_dma_remove - Driver remove function
676  * @pdev: Pointer to the platform_device structure
677  */
678 static void ls2x_dma_remove(struct platform_device *pdev)
679 {
680         struct ls2x_dma_priv *priv = platform_get_drvdata(pdev);
681
682         of_dma_controller_free(pdev->dev.of_node);
683         dma_async_device_unregister(&priv->ddev);
684         clk_disable_unprepare(priv->dma_clk);
685 }
686
687 static const struct of_device_id ls2x_dma_of_match_table[] = {
688         { .compatible = "loongson,ls2k1000-apbdma" },
689         { /* sentinel */ }
690 };
691 MODULE_DEVICE_TABLE(of, ls2x_dma_of_match_table);
692
693 static struct platform_driver ls2x_dmac_driver = {
694         .probe          = ls2x_dma_probe,
695         .remove         = ls2x_dma_remove,
696         .driver = {
697                 .name   = "ls2x-apbdma",
698                 .of_match_table = ls2x_dma_of_match_table,
699         },
700 };
701 module_platform_driver(ls2x_dmac_driver);
702
703 MODULE_DESCRIPTION("Loongson-2 APB DMA Controller driver");
704 MODULE_AUTHOR("Loongson Technology Corporation Limited");
705 MODULE_LICENSE("GPL");
This page took 0.107751 seconds and 4 git commands to generate.