]> Git Repo - J-linux.git/blob - drivers/bus/bt1-axi.c
Merge tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
[J-linux.git] / drivers / bus / bt1-axi.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
4  *
5  * Authors:
6  *   Serge Semin <[email protected]>
7  *
8  * Baikal-T1 AXI-bus driver
9  */
10
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/types.h>
14 #include <linux/bitfield.h>
15 #include <linux/device.h>
16 #include <linux/atomic.h>
17 #include <linux/regmap.h>
18 #include <linux/platform_device.h>
19 #include <linux/mfd/syscon.h>
20 #include <linux/interrupt.h>
21 #include <linux/io.h>
22 #include <linux/nmi.h>
23 #include <linux/of.h>
24 #include <linux/clk.h>
25 #include <linux/reset.h>
26 #include <linux/sysfs.h>
27
28 #define BT1_AXI_WERRL                   0x110
29 #define BT1_AXI_WERRH                   0x114
30 #define BT1_AXI_WERRH_TYPE              BIT(23)
31 #define BT1_AXI_WERRH_ADDR_FLD          24
32 #define BT1_AXI_WERRH_ADDR_MASK         GENMASK(31, BT1_AXI_WERRH_ADDR_FLD)
33
34 /*
35  * struct bt1_axi - Baikal-T1 AXI-bus private data
36  * @dev: Pointer to the device structure.
37  * @qos_regs: AXI Interconnect QoS tuning registers.
38  * @sys_regs: Baikal-T1 System Controller registers map.
39  * @irq: Errors IRQ number.
40  * @aclk: AXI reference clock.
41  * @arst: AXI Interconnect reset line.
42  * @count: Number of errors detected.
43  */
44 struct bt1_axi {
45         struct device *dev;
46
47         void __iomem *qos_regs;
48         struct regmap *sys_regs;
49         int irq;
50
51         struct clk *aclk;
52
53         struct reset_control *arst;
54
55         atomic_t count;
56 };
57
58 static irqreturn_t bt1_axi_isr(int irq, void *data)
59 {
60         struct bt1_axi *axi = data;
61         u32 low = 0, high = 0;
62
63         regmap_read(axi->sys_regs, BT1_AXI_WERRL, &low);
64         regmap_read(axi->sys_regs, BT1_AXI_WERRH, &high);
65
66         dev_crit_ratelimited(axi->dev,
67                 "AXI-bus fault %d: %s at 0x%x%08x\n",
68                 atomic_inc_return(&axi->count),
69                 high & BT1_AXI_WERRH_TYPE ? "no slave" : "slave protocol error",
70                 high, low);
71
72         /*
73          * Print backtrace on each CPU. This might be pointless if the fault
74          * has happened on the same CPU as the IRQ handler is executed or
75          * the other core proceeded further execution despite the error.
76          * But if it's not, by looking at the trace we would get straight to
77          * the cause of the problem.
78          */
79         trigger_all_cpu_backtrace();
80
81         return IRQ_HANDLED;
82 }
83
84 static void bt1_axi_clear_data(void *data)
85 {
86         struct bt1_axi *axi = data;
87         struct platform_device *pdev = to_platform_device(axi->dev);
88
89         platform_set_drvdata(pdev, NULL);
90 }
91
92 static struct bt1_axi *bt1_axi_create_data(struct platform_device *pdev)
93 {
94         struct device *dev = &pdev->dev;
95         struct bt1_axi *axi;
96         int ret;
97
98         axi = devm_kzalloc(dev, sizeof(*axi), GFP_KERNEL);
99         if (!axi)
100                 return ERR_PTR(-ENOMEM);
101
102         ret = devm_add_action(dev, bt1_axi_clear_data, axi);
103         if (ret) {
104                 dev_err(dev, "Can't add AXI EHB data clear action\n");
105                 return ERR_PTR(ret);
106         }
107
108         axi->dev = dev;
109         atomic_set(&axi->count, 0);
110         platform_set_drvdata(pdev, axi);
111
112         return axi;
113 }
114
115 static int bt1_axi_request_regs(struct bt1_axi *axi)
116 {
117         struct platform_device *pdev = to_platform_device(axi->dev);
118         struct device *dev = axi->dev;
119
120         axi->sys_regs = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
121         if (IS_ERR(axi->sys_regs)) {
122                 dev_err(dev, "Couldn't find syscon registers\n");
123                 return PTR_ERR(axi->sys_regs);
124         }
125
126         axi->qos_regs = devm_platform_ioremap_resource_byname(pdev, "qos");
127         if (IS_ERR(axi->qos_regs))
128                 dev_err(dev, "Couldn't map AXI-bus QoS registers\n");
129
130         return PTR_ERR_OR_ZERO(axi->qos_regs);
131 }
132
133 static int bt1_axi_request_rst(struct bt1_axi *axi)
134 {
135         int ret;
136
137         axi->arst = devm_reset_control_get_optional_exclusive(axi->dev, "arst");
138         if (IS_ERR(axi->arst))
139                 return dev_err_probe(axi->dev, PTR_ERR(axi->arst),
140                                      "Couldn't get reset control line\n");
141
142         ret = reset_control_deassert(axi->arst);
143         if (ret)
144                 dev_err(axi->dev, "Failed to deassert the reset line\n");
145
146         return ret;
147 }
148
149 static int bt1_axi_request_clk(struct bt1_axi *axi)
150 {
151         axi->aclk = devm_clk_get_enabled(axi->dev, "aclk");
152         if (IS_ERR(axi->aclk))
153                 return dev_err_probe(axi->dev, PTR_ERR(axi->aclk),
154                                      "Couldn't get AXI Interconnect clock\n");
155
156         return 0;
157 }
158
159 static int bt1_axi_request_irq(struct bt1_axi *axi)
160 {
161         struct platform_device *pdev = to_platform_device(axi->dev);
162         int ret;
163
164         axi->irq = platform_get_irq(pdev, 0);
165         if (axi->irq < 0)
166                 return axi->irq;
167
168         ret = devm_request_irq(axi->dev, axi->irq, bt1_axi_isr, IRQF_SHARED,
169                                "bt1-axi", axi);
170         if (ret)
171                 dev_err(axi->dev, "Couldn't request AXI EHB IRQ\n");
172
173         return ret;
174 }
175
176 static ssize_t count_show(struct device *dev,
177                           struct device_attribute *attr, char *buf)
178 {
179         struct bt1_axi *axi = dev_get_drvdata(dev);
180
181         return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&axi->count));
182 }
183 static DEVICE_ATTR_RO(count);
184
185 static ssize_t inject_error_show(struct device *dev,
186                                  struct device_attribute *attr, char *buf)
187 {
188         return scnprintf(buf, PAGE_SIZE, "Error injection: bus unaligned\n");
189 }
190
191 static ssize_t inject_error_store(struct device *dev,
192                                   struct device_attribute *attr,
193                                   const char *data, size_t count)
194 {
195         struct bt1_axi *axi = dev_get_drvdata(dev);
196
197         /*
198          * Performing unaligned read from the memory will cause the CM2 bus
199          * error while unaligned writing - the AXI bus write error handled
200          * by this driver.
201          */
202         if (sysfs_streq(data, "bus"))
203                 readb(axi->qos_regs);
204         else if (sysfs_streq(data, "unaligned"))
205                 writeb(0, axi->qos_regs);
206         else
207                 return -EINVAL;
208
209         return count;
210 }
211 static DEVICE_ATTR_RW(inject_error);
212
213 static struct attribute *bt1_axi_sysfs_attrs[] = {
214         &dev_attr_count.attr,
215         &dev_attr_inject_error.attr,
216         NULL
217 };
218 ATTRIBUTE_GROUPS(bt1_axi_sysfs);
219
220 static void bt1_axi_remove_sysfs(void *data)
221 {
222         struct bt1_axi *axi = data;
223
224         device_remove_groups(axi->dev, bt1_axi_sysfs_groups);
225 }
226
227 static int bt1_axi_init_sysfs(struct bt1_axi *axi)
228 {
229         int ret;
230
231         ret = device_add_groups(axi->dev, bt1_axi_sysfs_groups);
232         if (ret) {
233                 dev_err(axi->dev, "Failed to add sysfs files group\n");
234                 return ret;
235         }
236
237         ret = devm_add_action_or_reset(axi->dev, bt1_axi_remove_sysfs, axi);
238         if (ret)
239                 dev_err(axi->dev, "Can't add AXI EHB sysfs remove action\n");
240
241         return ret;
242 }
243
244 static int bt1_axi_probe(struct platform_device *pdev)
245 {
246         struct bt1_axi *axi;
247         int ret;
248
249         axi = bt1_axi_create_data(pdev);
250         if (IS_ERR(axi))
251                 return PTR_ERR(axi);
252
253         ret = bt1_axi_request_regs(axi);
254         if (ret)
255                 return ret;
256
257         ret = bt1_axi_request_rst(axi);
258         if (ret)
259                 return ret;
260
261         ret = bt1_axi_request_clk(axi);
262         if (ret)
263                 return ret;
264
265         ret = bt1_axi_request_irq(axi);
266         if (ret)
267                 return ret;
268
269         ret = bt1_axi_init_sysfs(axi);
270         if (ret)
271                 return ret;
272
273         return 0;
274 }
275
276 static const struct of_device_id bt1_axi_of_match[] = {
277         { .compatible = "baikal,bt1-axi" },
278         { }
279 };
280 MODULE_DEVICE_TABLE(of, bt1_axi_of_match);
281
282 static struct platform_driver bt1_axi_driver = {
283         .probe = bt1_axi_probe,
284         .driver = {
285                 .name = "bt1-axi",
286                 .of_match_table = bt1_axi_of_match
287         }
288 };
289 module_platform_driver(bt1_axi_driver);
290
291 MODULE_AUTHOR("Serge Semin <[email protected]>");
292 MODULE_DESCRIPTION("Baikal-T1 AXI-bus driver");
This page took 0.04414 seconds and 4 git commands to generate.