drivers/crypto/inside-secure/safexcel.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2017 Marvell
   4  *
   5  * Antoine Tenart <[email protected]>
   6  */
   7
   8 #include <linux/clk.h>
   9 #include <linux/device.h>
  10 #include <linux/dma-mapping.h>
  11 #include <linux/dmapool.h>
  12 #include <linux/firmware.h>
  13 #include <linux/interrupt.h>
  14 #include <linux/module.h>
  15 #include <linux/of_platform.h>
  16 #include <linux/of_irq.h>
  17 #include <linux/pci.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/workqueue.h>
  20
  21 #include <crypto/internal/aead.h>
  22 #include <crypto/internal/hash.h>
  23 #include <crypto/internal/skcipher.h>
  24
  25 #include "safexcel.h"
  26
  27 static u32 max_rings = EIP197_MAX_RINGS;
  28 module_param(max_rings, uint, 0644);
  29 MODULE_PARM_DESC(max_rings, "Maximum number of rings to use.");
  30
  31 static void eip197_trc_cache_setupvirt(struct safexcel_crypto_priv *priv)
  32 {
  33         int i;
  34
  35         /*
  36          * Map all interfaces/rings to register index 0
  37          * so they can share contexts. Without this, the EIP197 will
  38          * assume each interface/ring to be in its own memory domain
  39          * i.e. have its own subset of UNIQUE memory addresses.
  40          * Which would cause records with the SAME memory address to
  41          * use DIFFERENT cache buffers, causing both poor cache utilization
  42          * AND serious coherence/invalidation issues.
  43          */
  44         for (i = 0; i < 4; i++)
  45                 writel(0, priv->base + EIP197_FLUE_IFC_LUT(i));
  46
  47         /*
  48          * Initialize other virtualization regs for cache
  49          * These may not be in their reset state ...
  50          */
  51         for (i = 0; i < priv->config.rings; i++) {
  52                 writel(0, priv->base + EIP197_FLUE_CACHEBASE_LO(i));
  53                 writel(0, priv->base + EIP197_FLUE_CACHEBASE_HI(i));
  54                 writel(EIP197_FLUE_CONFIG_MAGIC,
  55                        priv->base + EIP197_FLUE_CONFIG(i));
  56         }
  57         writel(0, priv->base + EIP197_FLUE_OFFSETS);
  58         writel(0, priv->base + EIP197_FLUE_ARC4_OFFSET);
  59 }
  60
  61 static void eip197_trc_cache_banksel(struct safexcel_crypto_priv *priv,
  62                                      u32 addrmid, int *actbank)
  63 {
  64         u32 val;
  65         int curbank;
  66
  67         curbank = addrmid >> 16;
  68         if (curbank != *actbank) {
  69                 val = readl(priv->base + EIP197_CS_RAM_CTRL);
  70                 val = (val & ~EIP197_CS_BANKSEL_MASK) |
  71                       (curbank << EIP197_CS_BANKSEL_OFS);
  72                 writel(val, priv->base + EIP197_CS_RAM_CTRL);
  73                 *actbank = curbank;
  74         }
  75 }
  76
  77 static u32 eip197_trc_cache_probe(struct safexcel_crypto_priv *priv,
  78                                   int maxbanks, u32 probemask, u32 stride)
  79 {
  80         u32 val, addrhi, addrlo, addrmid, addralias, delta, marker;
  81         int actbank;
  82
  83         /*
  84          * And probe the actual size of the physically attached cache data RAM
  85          * Using a binary subdivision algorithm downto 32 byte cache lines.
  86          */
  87         addrhi = 1 << (16 + maxbanks);
  88         addrlo = 0;
  89         actbank = min(maxbanks - 1, 0);
  90         while ((addrhi - addrlo) > stride) {
  91                 /* write marker to lowest address in top half */
  92                 addrmid = (addrhi + addrlo) >> 1;
  93                 marker = (addrmid ^ 0xabadbabe) & probemask; /* Unique */
  94                 eip197_trc_cache_banksel(priv, addrmid, &actbank);
  95                 writel(marker,
  96                         priv->base + EIP197_CLASSIFICATION_RAMS +
  97                         (addrmid & 0xffff));
  98
  99                 /* write invalid markers to possible aliases */
 100                 delta = 1 << __fls(addrmid);
 101                 while (delta >= stride) {
 102                         addralias = addrmid - delta;
 103                         eip197_trc_cache_banksel(priv, addralias, &actbank);
 104                         writel(~marker,
 105                                priv->base + EIP197_CLASSIFICATION_RAMS +
 106                                (addralias & 0xffff));
 107                         delta >>= 1;
 108                 }
 109
 110                 /* read back marker from top half */
 111                 eip197_trc_cache_banksel(priv, addrmid, &actbank);
 112                 val = readl(priv->base + EIP197_CLASSIFICATION_RAMS +
 113                             (addrmid & 0xffff));
 114
 115                 if ((val & probemask) == marker)
 116                         /* read back correct, continue with top half */
 117                         addrlo = addrmid;
 118                 else
 119                         /* not read back correct, continue with bottom half */
 120                         addrhi = addrmid;
 121         }
 122         return addrhi;
 123 }
 124
 125 static void eip197_trc_cache_clear(struct safexcel_crypto_priv *priv,
 126                                    int cs_rc_max, int cs_ht_wc)
 127 {
 128         int i;
 129         u32 htable_offset, val, offset;
 130
 131         /* Clear all records in administration RAM */
 132         for (i = 0; i < cs_rc_max; i++) {
 133                 offset = EIP197_CLASSIFICATION_RAMS + i * EIP197_CS_RC_SIZE;
 134
 135                 writel(EIP197_CS_RC_NEXT(EIP197_RC_NULL) |
 136                        EIP197_CS_RC_PREV(EIP197_RC_NULL),
 137                        priv->base + offset);
 138
 139                 val = EIP197_CS_RC_NEXT(i + 1) | EIP197_CS_RC_PREV(i - 1);
 140                 if (i == 0)
 141                         val |= EIP197_CS_RC_PREV(EIP197_RC_NULL);
 142                 else if (i == cs_rc_max - 1)
 143                         val |= EIP197_CS_RC_NEXT(EIP197_RC_NULL);
 144                 writel(val, priv->base + offset + 4);
 145                 /* must also initialize the address key due to ECC! */
 146                 writel(0, priv->base + offset + 8);
 147                 writel(0, priv->base + offset + 12);
 148         }
 149
 150         /* Clear the hash table entries */
 151         htable_offset = cs_rc_max * EIP197_CS_RC_SIZE;
 152         for (i = 0; i < cs_ht_wc; i++)
 153                 writel(GENMASK(29, 0),
 154                        priv->base + EIP197_CLASSIFICATION_RAMS +
 155                        htable_offset + i * sizeof(u32));
 156 }
 157
 158 static int eip197_trc_cache_init(struct safexcel_crypto_priv *priv)
 159 {
 160         u32 val, dsize, asize;
 161         int cs_rc_max, cs_ht_wc, cs_trc_rec_wc, cs_trc_lg_rec_wc;
 162         int cs_rc_abs_max, cs_ht_sz;
 163         int maxbanks;
 164
 165         /* Setup (dummy) virtualization for cache */
 166         eip197_trc_cache_setupvirt(priv);
 167
 168         /*
 169          * Enable the record cache memory access and
 170          * probe the bank select width
 171          */
 172         val = readl(priv->base + EIP197_CS_RAM_CTRL);
 173         val &= ~EIP197_TRC_ENABLE_MASK;
 174         val |= EIP197_TRC_ENABLE_0 | EIP197_CS_BANKSEL_MASK;
 175         writel(val, priv->base + EIP197_CS_RAM_CTRL);
 176         val = readl(priv->base + EIP197_CS_RAM_CTRL);
 177         maxbanks = ((val&EIP197_CS_BANKSEL_MASK)>>EIP197_CS_BANKSEL_OFS) + 1;
 178
 179         /* Clear all ECC errors */
 180         writel(0, priv->base + EIP197_TRC_ECCCTRL);
 181
 182         /*
 183          * Make sure the cache memory is accessible by taking record cache into
 184          * reset. Need data memory access here, not admin access.
 185          */
 186         val = readl(priv->base + EIP197_TRC_PARAMS);
 187         val |= EIP197_TRC_PARAMS_SW_RESET | EIP197_TRC_PARAMS_DATA_ACCESS;
 188         writel(val, priv->base + EIP197_TRC_PARAMS);
 189
 190         /* Probed data RAM size in bytes */
 191         dsize = eip197_trc_cache_probe(priv, maxbanks, 0xffffffff, 32);
 192
 193         /*
 194          * Now probe the administration RAM size pretty much the same way
 195          * Except that only the lower 30 bits are writable and we don't need
 196          * bank selects
 197          */
 198         val = readl(priv->base + EIP197_TRC_PARAMS);
 199         /* admin access now */
 200         val &= ~(EIP197_TRC_PARAMS_DATA_ACCESS | EIP197_CS_BANKSEL_MASK);
 201         writel(val, priv->base + EIP197_TRC_PARAMS);
 202
 203         /* Probed admin RAM size in admin words */
 204         asize = eip197_trc_cache_probe(priv, 0, 0x3fffffff, 16) >> 4;
 205
 206         /* Clear any ECC errors detected while probing! */
 207         writel(0, priv->base + EIP197_TRC_ECCCTRL);
 208
 209         /* Sanity check probing results */
 210         if (dsize < EIP197_MIN_DSIZE || asize < EIP197_MIN_ASIZE) {
 211                 dev_err(priv->dev, "Record cache probing failed (%d,%d).",
 212                         dsize, asize);
 213                 return -ENODEV;
 214         }
 215
 216         /*
 217          * Determine optimal configuration from RAM sizes
 218          * Note that we assume that the physical RAM configuration is sane
 219          * Therefore, we don't do any parameter error checking here ...
 220          */
 221
 222         /* For now, just use a single record format covering everything */
 223         cs_trc_rec_wc = EIP197_CS_TRC_REC_WC;
 224         cs_trc_lg_rec_wc = EIP197_CS_TRC_REC_WC;
 225
 226         /*
 227          * Step #1: How many records will physically fit?
 228          * Hard upper limit is 1023!
 229          */
 230         cs_rc_abs_max = min_t(uint, ((dsize >> 2) / cs_trc_lg_rec_wc), 1023);
 231         /* Step #2: Need at least 2 words in the admin RAM per record */
 232         cs_rc_max = min_t(uint, cs_rc_abs_max, (asize >> 1));
 233         /* Step #3: Determine log2 of hash table size */
 234         cs_ht_sz = __fls(asize - cs_rc_max) - 2;
 235         /* Step #4: determine current size of hash table in dwords */
 236         cs_ht_wc = 16 << cs_ht_sz; /* dwords, not admin words */
 237         /* Step #5: add back excess words and see if we can fit more records */
 238         cs_rc_max = min_t(uint, cs_rc_abs_max, asize - (cs_ht_wc >> 2));
 239
 240         /* Clear the cache RAMs */
 241         eip197_trc_cache_clear(priv, cs_rc_max, cs_ht_wc);
 242
 243         /* Disable the record cache memory access */
 244         val = readl(priv->base + EIP197_CS_RAM_CTRL);
 245         val &= ~EIP197_TRC_ENABLE_MASK;
 246         writel(val, priv->base + EIP197_CS_RAM_CTRL);
 247
 248         /* Write head and tail pointers of the record free chain */
 249         val = EIP197_TRC_FREECHAIN_HEAD_PTR(0) |
 250               EIP197_TRC_FREECHAIN_TAIL_PTR(cs_rc_max - 1);
 251         writel(val, priv->base + EIP197_TRC_FREECHAIN);
 252
 253         /* Configure the record cache #1 */
 254         val = EIP197_TRC_PARAMS2_RC_SZ_SMALL(cs_trc_rec_wc) |
 255               EIP197_TRC_PARAMS2_HTABLE_PTR(cs_rc_max);
 256         writel(val, priv->base + EIP197_TRC_PARAMS2);
 257
 258         /* Configure the record cache #2 */
 259         val = EIP197_TRC_PARAMS_RC_SZ_LARGE(cs_trc_lg_rec_wc) |
 260               EIP197_TRC_PARAMS_BLK_TIMER_SPEED(1) |
 261               EIP197_TRC_PARAMS_HTABLE_SZ(cs_ht_sz);
 262         writel(val, priv->base + EIP197_TRC_PARAMS);
 263
 264         dev_info(priv->dev, "TRC init: %dd,%da (%dr,%dh)\n",
 265                  dsize, asize, cs_rc_max, cs_ht_wc + cs_ht_wc);
 266         return 0;
 267 }
 268
 269 static void eip197_init_firmware(struct safexcel_crypto_priv *priv)
 270 {
 271         int pe, i;
 272         u32 val;
 273
 274         for (pe = 0; pe < priv->config.pes; pe++) {
 275                 /* Configure the token FIFO's */
 276                 writel(3, EIP197_PE(priv) + EIP197_PE_ICE_PUTF_CTRL(pe));
 277                 writel(0, EIP197_PE(priv) + EIP197_PE_ICE_PPTF_CTRL(pe));
 278
 279                 /* Clear the ICE scratchpad memory */
 280                 val = readl(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
 281                 val |= EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_TIMER |
 282                        EIP197_PE_ICE_SCRATCH_CTRL_TIMER_EN |
 283                        EIP197_PE_ICE_SCRATCH_CTRL_SCRATCH_ACCESS |
 284                        EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_ACCESS;
 285                 writel(val, EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
 286
 287                 /* clear the scratchpad RAM using 32 bit writes only */
 288                 for (i = 0; i < EIP197_NUM_OF_SCRATCH_BLOCKS; i++)
 289                         writel(0, EIP197_PE(priv) +
 290                                   EIP197_PE_ICE_SCRATCH_RAM(pe) + (i << 2));
 291
 292                 /* Reset the IFPP engine to make its program mem accessible */
 293                 writel(EIP197_PE_ICE_x_CTRL_SW_RESET |
 294                        EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR |
 295                        EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR,
 296                        EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe));
 297
 298                 /* Reset the IPUE engine to make its program mem accessible */
 299                 writel(EIP197_PE_ICE_x_CTRL_SW_RESET |
 300                        EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR |
 301                        EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR,
 302                        EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe));
 303
 304                 /* Enable access to all IFPP program memories */
 305                 writel(EIP197_PE_ICE_RAM_CTRL_FPP_PROG_EN,
 306                        EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
 307
 308                 /* bypass the OCE, if present */
 309                 if (priv->flags & EIP197_OCE)
 310                         writel(EIP197_DEBUG_OCE_BYPASS, EIP197_PE(priv) +
 311                                                         EIP197_PE_DEBUG(pe));
 312         }
 313
 314 }
 315
 316 static int eip197_write_firmware(struct safexcel_crypto_priv *priv,
 317                                   const struct firmware *fw)
 318 {
 319         u32 val;
 320         int i;
 321
 322         /* Write the firmware */
 323         for (i = 0; i < fw->size / sizeof(u32); i++) {
 324                 if (priv->data->fw_little_endian)
 325                         val = le32_to_cpu(((const __le32 *)fw->data)[i]);
 326                 else
 327                         val = be32_to_cpu(((const __be32 *)fw->data)[i]);
 328
 329                 writel(val,
 330                        priv->base + EIP197_CLASSIFICATION_RAMS +
 331                        i * sizeof(val));
 332         }
 333
 334         /* Exclude final 2 NOPs from size */
 335         return i - EIP197_FW_TERMINAL_NOPS;
 336 }
 337
 338 /*
 339  * If FW is actual production firmware, then poll for its initialization
 340  * to complete and check if it is good for the HW, otherwise just return OK.
 341  */
 342 static bool poll_fw_ready(struct safexcel_crypto_priv *priv, int fpp)
 343 {
 344         int pe, pollcnt;
 345         u32 base, pollofs;
 346
 347         if (fpp)
 348                 pollofs  = EIP197_FW_FPP_READY;
 349         else
 350                 pollofs  = EIP197_FW_PUE_READY;
 351
 352         for (pe = 0; pe < priv->config.pes; pe++) {
 353                 base = EIP197_PE_ICE_SCRATCH_RAM(pe);
 354                 pollcnt = EIP197_FW_START_POLLCNT;
 355                 while (pollcnt &&
 356                        (readl_relaxed(EIP197_PE(priv) + base +
 357                               pollofs) != 1)) {
 358                         pollcnt--;
 359                 }
 360                 if (!pollcnt) {
 361                         dev_err(priv->dev, "FW(%d) for PE %d failed to start\n",
 362                                 fpp, pe);
 363                         return false;
 364                 }
 365         }
 366         return true;
 367 }
 368
 369 static bool eip197_start_firmware(struct safexcel_crypto_priv *priv,
 370                                   int ipuesz, int ifppsz, int minifw)
 371 {
 372         int pe;
 373         u32 val;
 374
 375         for (pe = 0; pe < priv->config.pes; pe++) {
 376                 /* Disable access to all program memory */
 377                 writel(0, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
 378
 379                 /* Start IFPP microengines */
 380                 if (minifw)
 381                         val = 0;
 382                 else
 383                         val = EIP197_PE_ICE_UENG_START_OFFSET((ifppsz - 1) &
 384                                         EIP197_PE_ICE_UENG_INIT_ALIGN_MASK) |
 385                                 EIP197_PE_ICE_UENG_DEBUG_RESET;
 386                 writel(val, EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe));
 387
 388                 /* Start IPUE microengines */
 389                 if (minifw)
 390                         val = 0;
 391                 else
 392                         val = EIP197_PE_ICE_UENG_START_OFFSET((ipuesz - 1) &
 393                                         EIP197_PE_ICE_UENG_INIT_ALIGN_MASK) |
 394                                 EIP197_PE_ICE_UENG_DEBUG_RESET;
 395                 writel(val, EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe));
 396         }
 397
 398         /* For miniFW startup, there is no initialization, so always succeed */
 399         if (minifw)
 400                 return true;
 401
 402         /* Wait until all the firmwares have properly started up */
 403         if (!poll_fw_ready(priv, 1))
 404                 return false;
 405         if (!poll_fw_ready(priv, 0))
 406                 return false;
 407
 408         return true;
 409 }
 410
 411 static int eip197_load_firmwares(struct safexcel_crypto_priv *priv)
 412 {
 413         const char *fw_name[] = {"ifpp.bin", "ipue.bin"};
 414         const struct firmware *fw[FW_NB];
 415         char fw_path[37], *dir = NULL;
 416         int i, j, ret = 0, pe;
 417         int ipuesz, ifppsz, minifw = 0;
 418
 419         if (priv->data->version == EIP197D_MRVL)
 420                 dir = "eip197d";
 421         else if (priv->data->version == EIP197B_MRVL ||
 422                  priv->data->version == EIP197_DEVBRD)
 423                 dir = "eip197b";
 424         else if (priv->data->version == EIP197C_MXL)
 425                 dir = "eip197c";
 426         else
 427                 return -ENODEV;
 428
 429 retry_fw:
 430         for (i = 0; i < FW_NB; i++) {
 431                 snprintf(fw_path, 37, "inside-secure/%s/%s", dir, fw_name[i]);
 432                 ret = firmware_request_nowarn(&fw[i], fw_path, priv->dev);
 433                 if (ret) {
 434                         if (minifw || priv->data->version != EIP197B_MRVL)
 435                                 goto release_fw;
 436
 437                         /* Fallback to the old firmware location for the
 438                          * EIP197b.
 439                          */
 440                         ret = firmware_request_nowarn(&fw[i], fw_name[i],
 441                                                       priv->dev);
 442                         if (ret)
 443                                 goto release_fw;
 444                 }
 445         }
 446
 447         eip197_init_firmware(priv);
 448
 449         ifppsz = eip197_write_firmware(priv, fw[FW_IFPP]);
 450
 451         /* Enable access to IPUE program memories */
 452         for (pe = 0; pe < priv->config.pes; pe++)
 453                 writel(EIP197_PE_ICE_RAM_CTRL_PUE_PROG_EN,
 454                        EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
 455
 456         ipuesz = eip197_write_firmware(priv, fw[FW_IPUE]);
 457
 458         if (eip197_start_firmware(priv, ipuesz, ifppsz, minifw)) {
 459                 dev_dbg(priv->dev, "Firmware loaded successfully\n");
 460                 return 0;
 461         }
 462
 463         ret = -ENODEV;
 464
 465 release_fw:
 466         for (j = 0; j < i; j++)
 467                 release_firmware(fw[j]);
 468
 469         if (!minifw) {
 470                 /* Retry with minifw path */
 471                 dev_dbg(priv->dev, "Firmware set not (fully) present or init failed, falling back to BCLA mode\n");
 472                 dir = "eip197_minifw";
 473                 minifw = 1;
 474                 goto retry_fw;
 475         }
 476
 477         dev_dbg(priv->dev, "Firmware load failed.\n");
 478
 479         return ret;
 480 }
 481
 482 static int safexcel_hw_setup_cdesc_rings(struct safexcel_crypto_priv *priv)
 483 {
 484         u32 cd_size_rnd, val;
 485         int i, cd_fetch_cnt;
 486
 487         cd_size_rnd  = (priv->config.cd_size +
 488                         (BIT(priv->hwconfig.hwdataw) - 1)) >>
 489                        priv->hwconfig.hwdataw;
 490         /* determine number of CD's we can fetch into the CD FIFO as 1 block */
 491         if (priv->flags & SAFEXCEL_HW_EIP197) {
 492                 /* EIP197: try to fetch enough in 1 go to keep all pipes busy */
 493                 cd_fetch_cnt = (1 << priv->hwconfig.hwcfsize) / cd_size_rnd;
 494                 cd_fetch_cnt = min_t(uint, cd_fetch_cnt,
 495                                      (priv->config.pes * EIP197_FETCH_DEPTH));
 496         } else {
 497                 /* for the EIP97, just fetch all that fits minus 1 */
 498                 cd_fetch_cnt = ((1 << priv->hwconfig.hwcfsize) /
 499                                 cd_size_rnd) - 1;
 500         }
 501         /*
 502          * Since we're using command desc's way larger than formally specified,
 503          * we need to check whether we can fit even 1 for low-end EIP196's!
 504          */
 505         if (!cd_fetch_cnt) {
 506                 dev_err(priv->dev, "Unable to fit even 1 command desc!\n");
 507                 return -ENODEV;
 508         }
 509
 510         for (i = 0; i < priv->config.rings; i++) {
 511                 /* ring base address */
 512                 writel(lower_32_bits(priv->ring[i].cdr.base_dma),
 513                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
 514                 writel(upper_32_bits(priv->ring[i].cdr.base_dma),
 515                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
 516
 517                 writel(EIP197_xDR_DESC_MODE_64BIT | EIP197_CDR_DESC_MODE_ADCP |
 518                        (priv->config.cd_offset << 14) | priv->config.cd_size,
 519                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE);
 520                 writel(((cd_fetch_cnt *
 521                          (cd_size_rnd << priv->hwconfig.hwdataw)) << 16) |
 522                        (cd_fetch_cnt * (priv->config.cd_offset / sizeof(u32))),
 523                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG);
 524
 525                 /* Configure DMA tx control */
 526                 val = EIP197_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS);
 527                 val |= EIP197_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS);
 528                 writel(val, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_DMA_CFG);
 529
 530                 /* clear any pending interrupt */
 531                 writel(GENMASK(5, 0),
 532                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_STAT);
 533         }
 534
 535         return 0;
 536 }
 537
 538 static int safexcel_hw_setup_rdesc_rings(struct safexcel_crypto_priv *priv)
 539 {
 540         u32 rd_size_rnd, val;
 541         int i, rd_fetch_cnt;
 542
 543         /* determine number of RD's we can fetch into the FIFO as one block */
 544         rd_size_rnd = (EIP197_RD64_FETCH_SIZE +
 545                        (BIT(priv->hwconfig.hwdataw) - 1)) >>
 546                       priv->hwconfig.hwdataw;
 547         if (priv->flags & SAFEXCEL_HW_EIP197) {
 548                 /* EIP197: try to fetch enough in 1 go to keep all pipes busy */
 549                 rd_fetch_cnt = (1 << priv->hwconfig.hwrfsize) / rd_size_rnd;
 550                 rd_fetch_cnt = min_t(uint, rd_fetch_cnt,
 551                                      (priv->config.pes * EIP197_FETCH_DEPTH));
 552         } else {
 553                 /* for the EIP97, just fetch all that fits minus 1 */
 554                 rd_fetch_cnt = ((1 << priv->hwconfig.hwrfsize) /
 555                                 rd_size_rnd) - 1;
 556         }
 557
 558         for (i = 0; i < priv->config.rings; i++) {
 559                 /* ring base address */
 560                 writel(lower_32_bits(priv->ring[i].rdr.base_dma),
 561                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
 562                 writel(upper_32_bits(priv->ring[i].rdr.base_dma),
 563                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
 564
 565                 writel(EIP197_xDR_DESC_MODE_64BIT | (priv->config.rd_offset << 14) |
 566                        priv->config.rd_size,
 567                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE);
 568
 569                 writel(((rd_fetch_cnt *
 570                          (rd_size_rnd << priv->hwconfig.hwdataw)) << 16) |
 571                        (rd_fetch_cnt * (priv->config.rd_offset / sizeof(u32))),
 572                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG);
 573
 574                 /* Configure DMA tx control */
 575                 val = EIP197_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS);
 576                 val |= EIP197_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS);
 577                 val |= EIP197_HIA_xDR_WR_RES_BUF | EIP197_HIA_xDR_WR_CTRL_BUF;
 578                 writel(val,
 579                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DMA_CFG);
 580
 581                 /* clear any pending interrupt */
 582                 writel(GENMASK(7, 0),
 583                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_STAT);
 584
 585                 /* enable ring interrupt */
 586                 val = readl(EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CTRL(i));
 587                 val |= EIP197_RDR_IRQ(i);
 588                 writel(val, EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CTRL(i));
 589         }
 590
 591         return 0;
 592 }
 593
 594 static int safexcel_hw_init(struct safexcel_crypto_priv *priv)
 595 {
 596         u32 val;
 597         int i, ret, pe, opbuflo, opbufhi;
 598
 599         dev_dbg(priv->dev, "HW init: using %d pipe(s) and %d ring(s)\n",
 600                 priv->config.pes, priv->config.rings);
 601
 602         /*
 603          * For EIP197's only set maximum number of TX commands to 2^5 = 32
 604          * Skip for the EIP97 as it does not have this field.
 605          */
 606         if (priv->flags & SAFEXCEL_HW_EIP197) {
 607                 val = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
 608                 val |= EIP197_MST_CTRL_TX_MAX_CMD(5);
 609                 writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
 610         }
 611
 612         /* Configure wr/rd cache values */
 613         writel(EIP197_MST_CTRL_RD_CACHE(RD_CACHE_4BITS) |
 614                EIP197_MST_CTRL_WD_CACHE(WR_CACHE_4BITS),
 615                EIP197_HIA_GEN_CFG(priv) + EIP197_MST_CTRL);
 616
 617         /* Interrupts reset */
 618
 619         /* Disable all global interrupts */
 620         writel(0, EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ENABLE_CTRL);
 621
 622         /* Clear any pending interrupt */
 623         writel(GENMASK(31, 0), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK);
 624
 625         /* Processing Engine configuration */
 626         for (pe = 0; pe < priv->config.pes; pe++) {
 627                 /* Data Fetch Engine configuration */
 628
 629                 /* Reset all DFE threads */
 630                 writel(EIP197_DxE_THR_CTRL_RESET_PE,
 631                        EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe));
 632
 633                 if (priv->flags & EIP197_PE_ARB)
 634                         /* Reset HIA input interface arbiter (if present) */
 635                         writel(EIP197_HIA_RA_PE_CTRL_RESET,
 636                                EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe));
 637
 638                 /* DMA transfer size to use */
 639                 val = EIP197_HIA_DFE_CFG_DIS_DEBUG;
 640                 val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(6) |
 641                        EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(9);
 642                 val |= EIP197_HIA_DxE_CFG_MIN_CTRL_SIZE(6) |
 643                        EIP197_HIA_DxE_CFG_MAX_CTRL_SIZE(7);
 644                 val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(RD_CACHE_3BITS);
 645                 val |= EIP197_HIA_DxE_CFG_CTRL_CACHE_CTRL(RD_CACHE_3BITS);
 646                 writel(val, EIP197_HIA_DFE(priv) + EIP197_HIA_DFE_CFG(pe));
 647
 648                 /* Leave the DFE threads reset state */
 649                 writel(0, EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe));
 650
 651                 /* Configure the processing engine thresholds */
 652                 writel(EIP197_PE_IN_xBUF_THRES_MIN(6) |
 653                        EIP197_PE_IN_xBUF_THRES_MAX(9),
 654                        EIP197_PE(priv) + EIP197_PE_IN_DBUF_THRES(pe));
 655                 writel(EIP197_PE_IN_xBUF_THRES_MIN(6) |
 656                        EIP197_PE_IN_xBUF_THRES_MAX(7),
 657                        EIP197_PE(priv) + EIP197_PE_IN_TBUF_THRES(pe));
 658
 659                 if (priv->flags & SAFEXCEL_HW_EIP197)
 660                         /* enable HIA input interface arbiter and rings */
 661                         writel(EIP197_HIA_RA_PE_CTRL_EN |
 662                                GENMASK(priv->config.rings - 1, 0),
 663                                EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe));
 664
 665                 /* Data Store Engine configuration */
 666
 667                 /* Reset all DSE threads */
 668                 writel(EIP197_DxE_THR_CTRL_RESET_PE,
 669                        EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe));
 670
 671                 /* Wait for all DSE threads to complete */
 672                 while ((readl(EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_STAT(pe)) &
 673                         GENMASK(15, 12)) != GENMASK(15, 12))
 674                         ;
 675
 676                 /* DMA transfer size to use */
 677                 if (priv->hwconfig.hwnumpes > 4) {
 678                         opbuflo = 9;
 679                         opbufhi = 10;
 680                 } else {
 681                         opbuflo = 7;
 682                         opbufhi = 8;
 683                 }
 684                 val = EIP197_HIA_DSE_CFG_DIS_DEBUG;
 685                 val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(opbuflo) |
 686                        EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(opbufhi);
 687                 val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(WR_CACHE_3BITS);
 688                 val |= EIP197_HIA_DSE_CFG_ALWAYS_BUFFERABLE;
 689                 /* FIXME: instability issues can occur for EIP97 but disabling
 690                  * it impacts performance.
 691                  */
 692                 if (priv->flags & SAFEXCEL_HW_EIP197)
 693                         val |= EIP197_HIA_DSE_CFG_EN_SINGLE_WR;
 694                 writel(val, EIP197_HIA_DSE(priv) + EIP197_HIA_DSE_CFG(pe));
 695
 696                 /* Leave the DSE threads reset state */
 697                 writel(0, EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe));
 698
 699                 /* Configure the processing engine thresholds */
 700                 writel(EIP197_PE_OUT_DBUF_THRES_MIN(opbuflo) |
 701                        EIP197_PE_OUT_DBUF_THRES_MAX(opbufhi),
 702                        EIP197_PE(priv) + EIP197_PE_OUT_DBUF_THRES(pe));
 703
 704                 /* Processing Engine configuration */
 705
 706                 /* Token & context configuration */
 707                 val = EIP197_PE_EIP96_TOKEN_CTRL_CTX_UPDATES |
 708                       EIP197_PE_EIP96_TOKEN_CTRL_NO_TOKEN_WAIT |
 709                       EIP197_PE_EIP96_TOKEN_CTRL_ENABLE_TIMEOUT;
 710                 writel(val, EIP197_PE(priv) + EIP197_PE_EIP96_TOKEN_CTRL(pe));
 711
 712                 /* H/W capabilities selection: just enable everything */
 713                 writel(EIP197_FUNCTION_ALL,
 714                        EIP197_PE(priv) + EIP197_PE_EIP96_FUNCTION_EN(pe));
 715                 writel(EIP197_FUNCTION_ALL,
 716                        EIP197_PE(priv) + EIP197_PE_EIP96_FUNCTION2_EN(pe));
 717         }
 718
 719         /* Command Descriptor Rings prepare */
 720         for (i = 0; i < priv->config.rings; i++) {
 721                 /* Clear interrupts for this ring */
 722                 writel(GENMASK(31, 0),
 723                        EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CLR(i));
 724
 725                 /* Disable external triggering */
 726                 writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG);
 727
 728                 /* Clear the pending prepared counter */
 729                 writel(EIP197_xDR_PREP_CLR_COUNT,
 730                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PREP_COUNT);
 731
 732                 /* Clear the pending processed counter */
 733                 writel(EIP197_xDR_PROC_CLR_COUNT,
 734                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_COUNT);
 735
 736                 writel(0,
 737                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PREP_PNTR);
 738                 writel(0,
 739                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR);
 740
 741                 writel((EIP197_DEFAULT_RING_SIZE * priv->config.cd_offset),
 742                        EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_SIZE);
 743         }
 744
 745         /* Result Descriptor Ring prepare */
 746         for (i = 0; i < priv->config.rings; i++) {
 747                 /* Disable external triggering*/
 748                 writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG);
 749
 750                 /* Clear the pending prepared counter */
 751                 writel(EIP197_xDR_PREP_CLR_COUNT,
 752                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PREP_COUNT);
 753
 754                 /* Clear the pending processed counter */
 755                 writel(EIP197_xDR_PROC_CLR_COUNT,
 756                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_COUNT);
 757
 758                 writel(0,
 759                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PREP_PNTR);
 760                 writel(0,
 761                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR);
 762
 763                 /* Ring size */
 764                 writel((EIP197_DEFAULT_RING_SIZE * priv->config.rd_offset),
 765                        EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_SIZE);
 766         }
 767
 768         for (pe = 0; pe < priv->config.pes; pe++) {
 769                 /* Enable command descriptor rings */
 770                 writel(EIP197_DxE_THR_CTRL_EN | GENMASK(priv->config.rings - 1, 0),
 771                        EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe));
 772
 773                 /* Enable result descriptor rings */
 774                 writel(EIP197_DxE_THR_CTRL_EN | GENMASK(priv->config.rings - 1, 0),
 775                        EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe));
 776         }
 777
 778         /* Clear any HIA interrupt */
 779         writel(GENMASK(30, 20), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK);
 780
 781         if (priv->flags & EIP197_SIMPLE_TRC) {
 782                 writel(EIP197_STRC_CONFIG_INIT |
 783                        EIP197_STRC_CONFIG_LARGE_REC(EIP197_CS_TRC_REC_WC) |
 784                        EIP197_STRC_CONFIG_SMALL_REC(EIP197_CS_TRC_REC_WC),
 785                        priv->base + EIP197_STRC_CONFIG);
 786                 writel(EIP197_PE_EIP96_TOKEN_CTRL2_CTX_DONE,
 787                        EIP197_PE(priv) + EIP197_PE_EIP96_TOKEN_CTRL2(0));
 788         } else if (priv->flags & SAFEXCEL_HW_EIP197) {
 789                 ret = eip197_trc_cache_init(priv);
 790                 if (ret)
 791                         return ret;
 792         }
 793
 794         if (priv->flags & EIP197_ICE) {
 795                 ret = eip197_load_firmwares(priv);
 796                 if (ret)
 797                         return ret;
 798         }
 799
 800         return safexcel_hw_setup_cdesc_rings(priv) ?:
 801                safexcel_hw_setup_rdesc_rings(priv) ?:
 802                0;
 803 }
 804
 805 /* Called with ring's lock taken */
 806 static void safexcel_try_push_requests(struct safexcel_crypto_priv *priv,
 807                                        int ring)
 808 {
 809         int coal = min_t(int, priv->ring[ring].requests, EIP197_MAX_BATCH_SZ);
 810
 811         if (!coal)
 812                 return;
 813
 814         /* Configure when we want an interrupt */
 815         writel(EIP197_HIA_RDR_THRESH_PKT_MODE |
 816                EIP197_HIA_RDR_THRESH_PROC_PKT(coal),
 817                EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_THRESH);
 818 }
 819
 820 void safexcel_dequeue(struct safexcel_crypto_priv *priv, int ring)
 821 {
 822         struct crypto_async_request *req, *backlog;
 823         struct safexcel_context *ctx;
 824         int ret, nreq = 0, cdesc = 0, rdesc = 0, commands, results;
 825
 826         /* If a request wasn't properly dequeued because of a lack of resources,
 827          * proceeded it first,
 828          */
 829         req = priv->ring[ring].req;
 830         backlog = priv->ring[ring].backlog;
 831         if (req)
 832                 goto handle_req;
 833
 834         while (true) {
 835                 spin_lock_bh(&priv->ring[ring].queue_lock);
 836                 backlog = crypto_get_backlog(&priv->ring[ring].queue);
 837                 req = crypto_dequeue_request(&priv->ring[ring].queue);
 838                 spin_unlock_bh(&priv->ring[ring].queue_lock);
 839
 840                 if (!req) {
 841                         priv->ring[ring].req = NULL;
 842                         priv->ring[ring].backlog = NULL;
 843                         goto finalize;
 844                 }
 845
 846 handle_req:
 847                 ctx = crypto_tfm_ctx(req->tfm);
 848                 ret = ctx->send(req, ring, &commands, &results);
 849                 if (ret)
 850                         goto request_failed;
 851
 852                 if (backlog)
 853                         backlog->complete(backlog, -EINPROGRESS);
 854
 855                 /* In case the send() helper did not issue any command to push
 856                  * to the engine because the input data was cached, continue to
 857                  * dequeue other requests as this is valid and not an error.
 858                  */
 859                 if (!commands && !results)
 860                         continue;
 861
 862                 cdesc += commands;
 863                 rdesc += results;
 864                 nreq++;
 865         }
 866
 867 request_failed:
 868         /* Not enough resources to handle all the requests. Bail out and save
 869          * the request and the backlog for the next dequeue call (per-ring).
 870          */
 871         priv->ring[ring].req = req;
 872         priv->ring[ring].backlog = backlog;
 873
 874 finalize:
 875         if (!nreq)
 876                 return;
 877
 878         spin_lock_bh(&priv->ring[ring].lock);
 879
 880         priv->ring[ring].requests += nreq;
 881
 882         if (!priv->ring[ring].busy) {
 883                 safexcel_try_push_requests(priv, ring);
 884                 priv->ring[ring].busy = true;
 885         }
 886
 887         spin_unlock_bh(&priv->ring[ring].lock);
 888
 889         /* let the RDR know we have pending descriptors */
 890         writel((rdesc * priv->config.rd_offset),
 891                EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT);
 892
 893         /* let the CDR know we have pending descriptors */
 894         writel((cdesc * priv->config.cd_offset),
 895                EIP197_HIA_CDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT);
 896 }
 897
 898 inline int safexcel_rdesc_check_errors(struct safexcel_crypto_priv *priv,
 899                                        void *rdp)
 900 {
 901         struct safexcel_result_desc *rdesc = rdp;
 902         struct result_data_desc *result_data = rdp + priv->config.res_offset;
 903
 904         if (likely((!rdesc->last_seg) || /* Rest only valid if last seg! */
 905                    ((!rdesc->descriptor_overflow) &&
 906                     (!rdesc->buffer_overflow) &&
 907                     (!result_data->error_code))))
 908                 return 0;
 909
 910         if (rdesc->descriptor_overflow)
 911                 dev_err(priv->dev, "Descriptor overflow detected");
 912
 913         if (rdesc->buffer_overflow)
 914                 dev_err(priv->dev, "Buffer overflow detected");
 915
 916         if (result_data->error_code & 0x4066) {
 917                 /* Fatal error (bits 1,2,5,6 & 14) */
 918                 dev_err(priv->dev,
 919                         "result descriptor error (%x)",
 920                         result_data->error_code);
 921
 922                 return -EIO;
 923         } else if (result_data->error_code &
 924                    (BIT(7) | BIT(4) | BIT(3) | BIT(0))) {
 925                 /*
 926                  * Give priority over authentication fails:
 927                  * Blocksize, length & overflow errors,
 928                  * something wrong with the input!
 929                  */
 930                 return -EINVAL;
 931         } else if (result_data->error_code & BIT(9)) {
 932                 /* Authentication failed */
 933                 return -EBADMSG;
 934         }
 935
 936         /* All other non-fatal errors */
 937         return -EINVAL;
 938 }
 939
 940 inline void safexcel_rdr_req_set(struct safexcel_crypto_priv *priv,
 941                                  int ring,
 942                                  struct safexcel_result_desc *rdesc,
 943                                  struct crypto_async_request *req)
 944 {
 945         int i = safexcel_ring_rdr_rdesc_index(priv, ring, rdesc);
 946
 947         priv->ring[ring].rdr_req[i] = req;
 948 }
 949
 950 inline struct crypto_async_request *
 951 safexcel_rdr_req_get(struct safexcel_crypto_priv *priv, int ring)
 952 {
 953         int i = safexcel_ring_first_rdr_index(priv, ring);
 954
 955         return priv->ring[ring].rdr_req[i];
 956 }
 957
 958 void safexcel_complete(struct safexcel_crypto_priv *priv, int ring)
 959 {
 960         struct safexcel_command_desc *cdesc;
 961
 962         /* Acknowledge the command descriptors */
 963         do {
 964                 cdesc = safexcel_ring_next_rptr(priv, &priv->ring[ring].cdr);
 965                 if (IS_ERR(cdesc)) {
 966                         dev_err(priv->dev,
 967                                 "Could not retrieve the command descriptor\n");
 968                         return;
 969                 }
 970         } while (!cdesc->last_seg);
 971 }
 972
 973 void safexcel_inv_complete(struct crypto_async_request *req, int error)
 974 {
 975         struct safexcel_inv_result *result = req->data;
 976
 977         if (error == -EINPROGRESS)
 978                 return;
 979
 980         result->error = error;
 981         complete(&result->completion);
 982 }
 983
 984 int safexcel_invalidate_cache(struct crypto_async_request *async,
 985                               struct safexcel_crypto_priv *priv,
 986                               dma_addr_t ctxr_dma, int ring)
 987 {
 988         struct safexcel_command_desc *cdesc;
 989         struct safexcel_result_desc *rdesc;
 990         struct safexcel_token  *dmmy;
 991         int ret = 0;
 992
 993         /* Prepare command descriptor */
 994         cdesc = safexcel_add_cdesc(priv, ring, true, true, 0, 0, 0, ctxr_dma,
 995                                    &dmmy);
 996         if (IS_ERR(cdesc))
 997                 return PTR_ERR(cdesc);
 998
 999         cdesc->control_data.type = EIP197_TYPE_EXTENDED;
1000         cdesc->control_data.options = 0;
1001         cdesc->control_data.context_lo &= ~EIP197_CONTEXT_SIZE_MASK;
1002         cdesc->control_data.control0 = CONTEXT_CONTROL_INV_TR;
1003
1004         /* Prepare result descriptor */
1005         rdesc = safexcel_add_rdesc(priv, ring, true, true, 0, 0);
1006
1007         if (IS_ERR(rdesc)) {
1008                 ret = PTR_ERR(rdesc);
1009                 goto cdesc_rollback;
1010         }
1011
1012         safexcel_rdr_req_set(priv, ring, rdesc, async);
1013
1014         return ret;
1015
1016 cdesc_rollback:
1017         safexcel_ring_rollback_wptr(priv, &priv->ring[ring].cdr);
1018
1019         return ret;
1020 }
1021
1022 static inline void safexcel_handle_result_descriptor(struct safexcel_crypto_priv *priv,
1023                                                      int ring)
1024 {
1025         struct crypto_async_request *req;
1026         struct safexcel_context *ctx;
1027         int ret, i, nreq, ndesc, tot_descs, handled = 0;
1028         bool should_complete;
1029
1030 handle_results:
1031         tot_descs = 0;
1032
1033         nreq = readl(EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT);
1034         nreq >>= EIP197_xDR_PROC_xD_PKT_OFFSET;
1035         nreq &= EIP197_xDR_PROC_xD_PKT_MASK;
1036         if (!nreq)
1037                 goto requests_left;
1038
1039         for (i = 0; i < nreq; i++) {
1040                 req = safexcel_rdr_req_get(priv, ring);
1041
1042                 ctx = crypto_tfm_ctx(req->tfm);
1043                 ndesc = ctx->handle_result(priv, ring, req,
1044                                            &should_complete, &ret);
1045                 if (ndesc < 0) {
1046                         dev_err(priv->dev, "failed to handle result (%d)\n",
1047                                 ndesc);
1048                         goto acknowledge;
1049                 }
1050
1051                 if (should_complete) {
1052                         local_bh_disable();
1053                         req->complete(req, ret);
1054                         local_bh_enable();
1055                 }
1056
1057                 tot_descs += ndesc;
1058                 handled++;
1059         }
1060
1061 acknowledge:
1062         if (i)
1063                 writel(EIP197_xDR_PROC_xD_PKT(i) |
1064                        (tot_descs * priv->config.rd_offset),
1065                        EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT);
1066
1067         /* If the number of requests overflowed the counter, try to proceed more
1068          * requests.
1069          */
1070         if (nreq == EIP197_xDR_PROC_xD_PKT_MASK)
1071                 goto handle_results;
1072
1073 requests_left:
1074         spin_lock_bh(&priv->ring[ring].lock);
1075
1076         priv->ring[ring].requests -= handled;
1077         safexcel_try_push_requests(priv, ring);
1078
1079         if (!priv->ring[ring].requests)
1080                 priv->ring[ring].busy = false;
1081
1082         spin_unlock_bh(&priv->ring[ring].lock);
1083 }
1084
1085 static void safexcel_dequeue_work(struct work_struct *work)
1086 {
1087         struct safexcel_work_data *data =
1088                         container_of(work, struct safexcel_work_data, work);
1089
1090         safexcel_dequeue(data->priv, data->ring);
1091 }
1092
1093 struct safexcel_ring_irq_data {
1094         struct safexcel_crypto_priv *priv;
1095         int ring;
1096 };
1097
1098 static irqreturn_t safexcel_irq_ring(int irq, void *data)
1099 {
1100         struct safexcel_ring_irq_data *irq_data = data;
1101         struct safexcel_crypto_priv *priv = irq_data->priv;
1102         int ring = irq_data->ring, rc = IRQ_NONE;
1103         u32 status, stat;
1104
1105         status = readl(EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLED_STAT(ring));
1106         if (!status)
1107                 return rc;
1108
1109         /* RDR interrupts */
1110         if (status & EIP197_RDR_IRQ(ring)) {
1111                 stat = readl(EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_STAT);
1112
1113                 if (unlikely(stat & EIP197_xDR_ERR)) {
1114                         /*
1115                          * Fatal error, the RDR is unusable and must be
1116                          * reinitialized. This should not happen under
1117                          * normal circumstances.
1118                          */
1119                         dev_err(priv->dev, "RDR: fatal error.\n");
1120                 } else if (likely(stat & EIP197_xDR_THRESH)) {
1121                         rc = IRQ_WAKE_THREAD;
1122                 }
1123
1124                 /* ACK the interrupts */
1125                 writel(stat & 0xff,
1126                        EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_STAT);
1127         }
1128
1129         /* ACK the interrupts */
1130         writel(status, EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ACK(ring));
1131
1132         return rc;
1133 }
1134
1135 static irqreturn_t safexcel_irq_ring_thread(int irq, void *data)
1136 {
1137         struct safexcel_ring_irq_data *irq_data = data;
1138         struct safexcel_crypto_priv *priv = irq_data->priv;
1139         int ring = irq_data->ring;
1140
1141         safexcel_handle_result_descriptor(priv, ring);
1142
1143         queue_work(priv->ring[ring].workqueue,
1144                    &priv->ring[ring].work_data.work);
1145
1146         return IRQ_HANDLED;
1147 }
1148
1149 static int safexcel_request_ring_irq(void *pdev, int irqid,
1150                                      int is_pci_dev,
1151                                      int ring_id,
1152                                      irq_handler_t handler,
1153                                      irq_handler_t threaded_handler,
1154                                      struct safexcel_ring_irq_data *ring_irq_priv)
1155 {
1156         int ret, irq, cpu;
1157         struct device *dev;
1158
1159         if (IS_ENABLED(CONFIG_PCI) && is_pci_dev) {
1160                 struct pci_dev *pci_pdev = pdev;
1161
1162                 dev = &pci_pdev->dev;
1163                 irq = pci_irq_vector(pci_pdev, irqid);
1164                 if (irq < 0) {
1165                         dev_err(dev, "unable to get device MSI IRQ %d (err %d)\n",
1166                                 irqid, irq);
1167                         return irq;
1168                 }
1169         } else if (IS_ENABLED(CONFIG_OF)) {
1170                 struct platform_device *plf_pdev = pdev;
1171                 char irq_name[6] = {0}; /* "ringX\0" */
1172
1173                 snprintf(irq_name, 6, "ring%d", irqid);
1174                 dev = &plf_pdev->dev;
1175                 irq = platform_get_irq_byname(plf_pdev, irq_name);
1176
1177                 if (irq < 0)
1178                         return irq;
1179         } else {
1180                 return -ENXIO;
1181         }
1182
1183         ret = devm_request_threaded_irq(dev, irq, handler,
1184                                         threaded_handler, IRQF_ONESHOT,
1185                                         dev_name(dev), ring_irq_priv);
1186         if (ret) {
1187                 dev_err(dev, "unable to request IRQ %d\n", irq);
1188                 return ret;
1189         }
1190
1191         /* Set affinity */
1192         cpu = cpumask_local_spread(ring_id, NUMA_NO_NODE);
1193         irq_set_affinity_hint(irq, get_cpu_mask(cpu));
1194
1195         return irq;
1196 }
1197
1198 static struct safexcel_alg_template *safexcel_algs[] = {
1199         &safexcel_alg_ecb_des,
1200         &safexcel_alg_cbc_des,
1201         &safexcel_alg_ecb_des3_ede,
1202         &safexcel_alg_cbc_des3_ede,
1203         &safexcel_alg_ecb_aes,
1204         &safexcel_alg_cbc_aes,
1205         &safexcel_alg_cfb_aes,
1206         &safexcel_alg_ofb_aes,
1207         &safexcel_alg_ctr_aes,
1208         &safexcel_alg_md5,
1209         &safexcel_alg_sha1,
1210         &safexcel_alg_sha224,
1211         &safexcel_alg_sha256,
1212         &safexcel_alg_sha384,
1213         &safexcel_alg_sha512,
1214         &safexcel_alg_hmac_md5,
1215         &safexcel_alg_hmac_sha1,
1216         &safexcel_alg_hmac_sha224,
1217         &safexcel_alg_hmac_sha256,
1218         &safexcel_alg_hmac_sha384,
1219         &safexcel_alg_hmac_sha512,
1220         &safexcel_alg_authenc_hmac_sha1_cbc_aes,
1221         &safexcel_alg_authenc_hmac_sha224_cbc_aes,
1222         &safexcel_alg_authenc_hmac_sha256_cbc_aes,
1223         &safexcel_alg_authenc_hmac_sha384_cbc_aes,
1224         &safexcel_alg_authenc_hmac_sha512_cbc_aes,
1225         &safexcel_alg_authenc_hmac_sha1_cbc_des3_ede,
1226         &safexcel_alg_authenc_hmac_sha1_ctr_aes,
1227         &safexcel_alg_authenc_hmac_sha224_ctr_aes,
1228         &safexcel_alg_authenc_hmac_sha256_ctr_aes,
1229         &safexcel_alg_authenc_hmac_sha384_ctr_aes,
1230         &safexcel_alg_authenc_hmac_sha512_ctr_aes,
1231         &safexcel_alg_xts_aes,
1232         &safexcel_alg_gcm,
1233         &safexcel_alg_ccm,
1234         &safexcel_alg_crc32,
1235         &safexcel_alg_cbcmac,
1236         &safexcel_alg_xcbcmac,
1237         &safexcel_alg_cmac,
1238         &safexcel_alg_chacha20,
1239         &safexcel_alg_chachapoly,
1240         &safexcel_alg_chachapoly_esp,
1241         &safexcel_alg_sm3,
1242         &safexcel_alg_hmac_sm3,
1243         &safexcel_alg_ecb_sm4,
1244         &safexcel_alg_cbc_sm4,
1245         &safexcel_alg_ofb_sm4,
1246         &safexcel_alg_cfb_sm4,
1247         &safexcel_alg_ctr_sm4,
1248         &safexcel_alg_authenc_hmac_sha1_cbc_sm4,
1249         &safexcel_alg_authenc_hmac_sm3_cbc_sm4,
1250         &safexcel_alg_authenc_hmac_sha1_ctr_sm4,
1251         &safexcel_alg_authenc_hmac_sm3_ctr_sm4,
1252         &safexcel_alg_sha3_224,
1253         &safexcel_alg_sha3_256,
1254         &safexcel_alg_sha3_384,
1255         &safexcel_alg_sha3_512,
1256         &safexcel_alg_hmac_sha3_224,
1257         &safexcel_alg_hmac_sha3_256,
1258         &safexcel_alg_hmac_sha3_384,
1259         &safexcel_alg_hmac_sha3_512,
1260         &safexcel_alg_authenc_hmac_sha1_cbc_des,
1261         &safexcel_alg_authenc_hmac_sha256_cbc_des3_ede,
1262         &safexcel_alg_authenc_hmac_sha224_cbc_des3_ede,
1263         &safexcel_alg_authenc_hmac_sha512_cbc_des3_ede,
1264         &safexcel_alg_authenc_hmac_sha384_cbc_des3_ede,
1265         &safexcel_alg_authenc_hmac_sha256_cbc_des,
1266         &safexcel_alg_authenc_hmac_sha224_cbc_des,
1267         &safexcel_alg_authenc_hmac_sha512_cbc_des,
1268         &safexcel_alg_authenc_hmac_sha384_cbc_des,
1269         &safexcel_alg_rfc4106_gcm,
1270         &safexcel_alg_rfc4543_gcm,
1271         &safexcel_alg_rfc4309_ccm,
1272 };
1273
1274 static int safexcel_register_algorithms(struct safexcel_crypto_priv *priv)
1275 {
1276         int i, j, ret = 0;
1277
1278         for (i = 0; i < ARRAY_SIZE(safexcel_algs); i++) {
1279                 safexcel_algs[i]->priv = priv;
1280
1281                 /* Do we have all required base algorithms available? */
1282                 if ((safexcel_algs[i]->algo_mask & priv->hwconfig.algo_flags) !=
1283                     safexcel_algs[i]->algo_mask)
1284                         /* No, so don't register this ciphersuite */
1285                         continue;
1286
1287                 if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_SKCIPHER)
1288                         ret = crypto_register_skcipher(&safexcel_algs[i]->alg.skcipher);
1289                 else if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_AEAD)
1290                         ret = crypto_register_aead(&safexcel_algs[i]->alg.aead);
1291                 else
1292                         ret = crypto_register_ahash(&safexcel_algs[i]->alg.ahash);
1293
1294                 if (ret)
1295                         goto fail;
1296         }
1297
1298         return 0;
1299
1300 fail:
1301         for (j = 0; j < i; j++) {
1302                 /* Do we have all required base algorithms available? */
1303                 if ((safexcel_algs[j]->algo_mask & priv->hwconfig.algo_flags) !=
1304                     safexcel_algs[j]->algo_mask)
1305                         /* No, so don't unregister this ciphersuite */
1306                         continue;
1307
1308                 if (safexcel_algs[j]->type == SAFEXCEL_ALG_TYPE_SKCIPHER)
1309                         crypto_unregister_skcipher(&safexcel_algs[j]->alg.skcipher);
1310                 else if (safexcel_algs[j]->type == SAFEXCEL_ALG_TYPE_AEAD)
1311                         crypto_unregister_aead(&safexcel_algs[j]->alg.aead);
1312                 else
1313                         crypto_unregister_ahash(&safexcel_algs[j]->alg.ahash);
1314         }
1315
1316         return ret;
1317 }
1318
1319 static void safexcel_unregister_algorithms(struct safexcel_crypto_priv *priv)
1320 {
1321         int i;
1322
1323         for (i = 0; i < ARRAY_SIZE(safexcel_algs); i++) {
1324                 /* Do we have all required base algorithms available? */
1325                 if ((safexcel_algs[i]->algo_mask & priv->hwconfig.algo_flags) !=
1326                     safexcel_algs[i]->algo_mask)
1327                         /* No, so don't unregister this ciphersuite */
1328                         continue;
1329
1330                 if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_SKCIPHER)
1331                         crypto_unregister_skcipher(&safexcel_algs[i]->alg.skcipher);
1332                 else if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_AEAD)
1333                         crypto_unregister_aead(&safexcel_algs[i]->alg.aead);
1334                 else
1335                         crypto_unregister_ahash(&safexcel_algs[i]->alg.ahash);
1336         }
1337 }
1338
1339 static void safexcel_configure(struct safexcel_crypto_priv *priv)
1340 {
1341         u32 mask = BIT(priv->hwconfig.hwdataw) - 1;
1342
1343         priv->config.pes = priv->hwconfig.hwnumpes;
1344         priv->config.rings = min_t(u32, priv->hwconfig.hwnumrings, max_rings);
1345         /* Cannot currently support more rings than we have ring AICs! */
1346         priv->config.rings = min_t(u32, priv->config.rings,
1347                                         priv->hwconfig.hwnumraic);
1348
1349         priv->config.cd_size = EIP197_CD64_FETCH_SIZE;
1350         priv->config.cd_offset = (priv->config.cd_size + mask) & ~mask;
1351         priv->config.cdsh_offset = (EIP197_MAX_TOKENS + mask) & ~mask;
1352
1353         /* res token is behind the descr, but ofs must be rounded to buswdth */
1354         priv->config.res_offset = (EIP197_RD64_FETCH_SIZE + mask) & ~mask;
1355         /* now the size of the descr is this 1st part plus the result struct */
1356         priv->config.rd_size    = priv->config.res_offset +
1357                                   EIP197_RD64_RESULT_SIZE;
1358         priv->config.rd_offset = (priv->config.rd_size + mask) & ~mask;
1359
1360         /* convert dwords to bytes */
1361         priv->config.cd_offset *= sizeof(u32);
1362         priv->config.cdsh_offset *= sizeof(u32);
1363         priv->config.rd_offset *= sizeof(u32);
1364         priv->config.res_offset *= sizeof(u32);
1365 }
1366
1367 static void safexcel_init_register_offsets(struct safexcel_crypto_priv *priv)
1368 {
1369         struct safexcel_register_offsets *offsets = &priv->offsets;
1370
1371         if (priv->flags & SAFEXCEL_HW_EIP197) {
1372                 offsets->hia_aic        = EIP197_HIA_AIC_BASE;
1373                 offsets->hia_aic_g      = EIP197_HIA_AIC_G_BASE;
1374                 offsets->hia_aic_r      = EIP197_HIA_AIC_R_BASE;
1375                 offsets->hia_aic_xdr    = EIP197_HIA_AIC_xDR_BASE;
1376                 offsets->hia_dfe        = EIP197_HIA_DFE_BASE;
1377                 offsets->hia_dfe_thr    = EIP197_HIA_DFE_THR_BASE;
1378                 offsets->hia_dse        = EIP197_HIA_DSE_BASE;
1379                 offsets->hia_dse_thr    = EIP197_HIA_DSE_THR_BASE;
1380                 offsets->hia_gen_cfg    = EIP197_HIA_GEN_CFG_BASE;
1381                 offsets->pe             = EIP197_PE_BASE;
1382                 offsets->global         = EIP197_GLOBAL_BASE;
1383         } else {
1384                 offsets->hia_aic        = EIP97_HIA_AIC_BASE;
1385                 offsets->hia_aic_g      = EIP97_HIA_AIC_G_BASE;
1386                 offsets->hia_aic_r      = EIP97_HIA_AIC_R_BASE;
1387                 offsets->hia_aic_xdr    = EIP97_HIA_AIC_xDR_BASE;
1388                 offsets->hia_dfe        = EIP97_HIA_DFE_BASE;
1389                 offsets->hia_dfe_thr    = EIP97_HIA_DFE_THR_BASE;
1390                 offsets->hia_dse        = EIP97_HIA_DSE_BASE;
1391                 offsets->hia_dse_thr    = EIP97_HIA_DSE_THR_BASE;
1392                 offsets->hia_gen_cfg    = EIP97_HIA_GEN_CFG_BASE;
1393                 offsets->pe             = EIP97_PE_BASE;
1394                 offsets->global         = EIP97_GLOBAL_BASE;
1395         }
1396 }
1397
1398 /*
1399  * Generic part of probe routine, shared by platform and PCI driver
1400  *
1401  * Assumes IO resources have been mapped, private data mem has been allocated,
1402  * clocks have been enabled, device pointer has been assigned etc.
1403  *
1404  */
1405 static int safexcel_probe_generic(void *pdev,
1406                                   struct safexcel_crypto_priv *priv,
1407                                   int is_pci_dev)
1408 {
1409         struct device *dev = priv->dev;
1410         u32 peid, version, mask, val, hiaopt, hwopt, peopt;
1411         int i, ret, hwctg;
1412
1413         priv->context_pool = dmam_pool_create("safexcel-context", dev,
1414                                               sizeof(struct safexcel_context_record),
1415                                               1, 0);
1416         if (!priv->context_pool)
1417                 return -ENOMEM;
1418
1419         /*
1420          * First try the EIP97 HIA version regs
1421          * For the EIP197, this is guaranteed to NOT return any of the test
1422          * values
1423          */
1424         version = readl(priv->base + EIP97_HIA_AIC_BASE + EIP197_HIA_VERSION);
1425
1426         mask = 0;  /* do not swap */
1427         if (EIP197_REG_LO16(version) == EIP197_HIA_VERSION_LE) {
1428                 priv->hwconfig.hiaver = EIP197_VERSION_MASK(version);
1429         } else if (EIP197_REG_HI16(version) == EIP197_HIA_VERSION_BE) {
1430                 /* read back byte-swapped, so complement byte swap bits */
1431                 mask = EIP197_MST_CTRL_BYTE_SWAP_BITS;
1432                 priv->hwconfig.hiaver = EIP197_VERSION_SWAP(version);
1433         } else {
1434                 /* So it wasn't an EIP97 ... maybe it's an EIP197? */
1435                 version = readl(priv->base + EIP197_HIA_AIC_BASE +
1436                                 EIP197_HIA_VERSION);
1437                 if (EIP197_REG_LO16(version) == EIP197_HIA_VERSION_LE) {
1438                         priv->hwconfig.hiaver = EIP197_VERSION_MASK(version);
1439                         priv->flags |= SAFEXCEL_HW_EIP197;
1440                 } else if (EIP197_REG_HI16(version) ==
1441                            EIP197_HIA_VERSION_BE) {
1442                         /* read back byte-swapped, so complement swap bits */
1443                         mask = EIP197_MST_CTRL_BYTE_SWAP_BITS;
1444                         priv->hwconfig.hiaver = EIP197_VERSION_SWAP(version);
1445                         priv->flags |= SAFEXCEL_HW_EIP197;
1446                 } else {
1447                         return -ENODEV;
1448                 }
1449         }
1450
1451         /* Now initialize the reg offsets based on the probing info so far */
1452         safexcel_init_register_offsets(priv);
1453
1454         /*
1455          * If the version was read byte-swapped, we need to flip the device
1456          * swapping Keep in mind here, though, that what we write will also be
1457          * byte-swapped ...
1458          */
1459         if (mask) {
1460                 val = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
1461                 val = val ^ (mask >> 24); /* toggle byte swap bits */
1462                 writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
1463         }
1464
1465         /*
1466          * We're not done probing yet! We may fall through to here if no HIA
1467          * was found at all. So, with the endianness presumably correct now and
1468          * the offsets setup, *really* probe for the EIP97/EIP197.
1469          */
1470         version = readl(EIP197_GLOBAL(priv) + EIP197_VERSION);
1471         if (((priv->flags & SAFEXCEL_HW_EIP197) &&
1472              (EIP197_REG_LO16(version) != EIP197_VERSION_LE) &&
1473              (EIP197_REG_LO16(version) != EIP196_VERSION_LE)) ||
1474             ((!(priv->flags & SAFEXCEL_HW_EIP197) &&
1475              (EIP197_REG_LO16(version) != EIP97_VERSION_LE)))) {
1476                 /*
1477                  * We did not find the device that matched our initial probing
1478                  * (or our initial probing failed) Report appropriate error.
1479                  */
1480                 dev_err(priv->dev, "Probing for EIP97/EIP19x failed - no such device (read %08x)\n",
1481                         version);
1482                 return -ENODEV;
1483         }
1484
1485         priv->hwconfig.hwver = EIP197_VERSION_MASK(version);
1486         hwctg = version >> 28;
1487         peid = version & 255;
1488
1489         /* Detect EIP206 processing pipe */
1490         version = readl(EIP197_PE(priv) + + EIP197_PE_VERSION(0));
1491         if (EIP197_REG_LO16(version) != EIP206_VERSION_LE) {
1492                 dev_err(priv->dev, "EIP%d: EIP206 not detected\n", peid);
1493                 return -ENODEV;
1494         }
1495         priv->hwconfig.ppver = EIP197_VERSION_MASK(version);
1496
1497         /* Detect EIP96 packet engine and version */
1498         version = readl(EIP197_PE(priv) + EIP197_PE_EIP96_VERSION(0));
1499         if (EIP197_REG_LO16(version) != EIP96_VERSION_LE) {
1500                 dev_err(dev, "EIP%d: EIP96 not detected.\n", peid);
1501                 return -ENODEV;
1502         }
1503         priv->hwconfig.pever = EIP197_VERSION_MASK(version);
1504
1505         hwopt = readl(EIP197_GLOBAL(priv) + EIP197_OPTIONS);
1506         hiaopt = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_OPTIONS);
1507
1508         priv->hwconfig.icever = 0;
1509         priv->hwconfig.ocever = 0;
1510         priv->hwconfig.psever = 0;
1511         if (priv->flags & SAFEXCEL_HW_EIP197) {
1512                 /* EIP197 */
1513                 peopt = readl(EIP197_PE(priv) + EIP197_PE_OPTIONS(0));
1514
1515                 priv->hwconfig.hwdataw  = (hiaopt >> EIP197_HWDATAW_OFFSET) &
1516                                           EIP197_HWDATAW_MASK;
1517                 priv->hwconfig.hwcfsize = ((hiaopt >> EIP197_CFSIZE_OFFSET) &
1518                                            EIP197_CFSIZE_MASK) +
1519                                           EIP197_CFSIZE_ADJUST;
1520                 priv->hwconfig.hwrfsize = ((hiaopt >> EIP197_RFSIZE_OFFSET) &
1521                                            EIP197_RFSIZE_MASK) +
1522                                           EIP197_RFSIZE_ADJUST;
1523                 priv->hwconfig.hwnumpes = (hiaopt >> EIP197_N_PES_OFFSET) &
1524                                           EIP197_N_PES_MASK;
1525                 priv->hwconfig.hwnumrings = (hiaopt >> EIP197_N_RINGS_OFFSET) &
1526                                             EIP197_N_RINGS_MASK;
1527                 if (hiaopt & EIP197_HIA_OPT_HAS_PE_ARB)
1528                         priv->flags |= EIP197_PE_ARB;
1529                 if (EIP206_OPT_ICE_TYPE(peopt) == 1) {
1530                         priv->flags |= EIP197_ICE;
1531                         /* Detect ICE EIP207 class. engine and version */
1532                         version = readl(EIP197_PE(priv) +
1533                                   EIP197_PE_ICE_VERSION(0));
1534                         if (EIP197_REG_LO16(version) != EIP207_VERSION_LE) {
1535                                 dev_err(dev, "EIP%d: ICE EIP207 not detected.\n",
1536                                         peid);
1537                                 return -ENODEV;
1538                         }
1539                         priv->hwconfig.icever = EIP197_VERSION_MASK(version);
1540                 }
1541                 if (EIP206_OPT_OCE_TYPE(peopt) == 1) {
1542                         priv->flags |= EIP197_OCE;
1543                         /* Detect EIP96PP packet stream editor and version */
1544                         version = readl(EIP197_PE(priv) + EIP197_PE_PSE_VERSION(0));
1545                         if (EIP197_REG_LO16(version) != EIP96_VERSION_LE) {
1546                                 dev_err(dev, "EIP%d: EIP96PP not detected.\n", peid);
1547                                 return -ENODEV;
1548                         }
1549                         priv->hwconfig.psever = EIP197_VERSION_MASK(version);
1550                         /* Detect OCE EIP207 class. engine and version */
1551                         version = readl(EIP197_PE(priv) +
1552                                   EIP197_PE_ICE_VERSION(0));
1553                         if (EIP197_REG_LO16(version) != EIP207_VERSION_LE) {
1554                                 dev_err(dev, "EIP%d: OCE EIP207 not detected.\n",
1555                                         peid);
1556                                 return -ENODEV;
1557                         }
1558                         priv->hwconfig.ocever = EIP197_VERSION_MASK(version);
1559                 }
1560                 /* If not a full TRC, then assume simple TRC */
1561                 if (!(hwopt & EIP197_OPT_HAS_TRC))
1562                         priv->flags |= EIP197_SIMPLE_TRC;
1563                 /* EIP197 always has SOME form of TRC */
1564                 priv->flags |= EIP197_TRC_CACHE;
1565         } else {
1566                 /* EIP97 */
1567                 priv->hwconfig.hwdataw  = (hiaopt >> EIP197_HWDATAW_OFFSET) &
1568                                           EIP97_HWDATAW_MASK;
1569                 priv->hwconfig.hwcfsize = (hiaopt >> EIP97_CFSIZE_OFFSET) &
1570                                           EIP97_CFSIZE_MASK;
1571                 priv->hwconfig.hwrfsize = (hiaopt >> EIP97_RFSIZE_OFFSET) &
1572                                           EIP97_RFSIZE_MASK;
1573                 priv->hwconfig.hwnumpes = 1; /* by definition */
1574                 priv->hwconfig.hwnumrings = (hiaopt >> EIP197_N_RINGS_OFFSET) &
1575                                             EIP197_N_RINGS_MASK;
1576         }
1577
1578         /* Scan for ring AIC's */
1579         for (i = 0; i < EIP197_MAX_RING_AIC; i++) {
1580                 version = readl(EIP197_HIA_AIC_R(priv) +
1581                                 EIP197_HIA_AIC_R_VERSION(i));
1582                 if (EIP197_REG_LO16(version) != EIP201_VERSION_LE)
1583                         break;
1584         }
1585         priv->hwconfig.hwnumraic = i;
1586         /* Low-end EIP196 may not have any ring AIC's ... */
1587         if (!priv->hwconfig.hwnumraic) {
1588                 dev_err(priv->dev, "No ring interrupt controller present!\n");
1589                 return -ENODEV;
1590         }
1591
1592         /* Get supported algorithms from EIP96 transform engine */
1593         priv->hwconfig.algo_flags = readl(EIP197_PE(priv) +
1594                                     EIP197_PE_EIP96_OPTIONS(0));
1595
1596         /* Print single info line describing what we just detected */
1597         dev_info(priv->dev, "EIP%d:%x(%d,%d,%d,%d)-HIA:%x(%d,%d,%d),PE:%x/%x(alg:%08x)/%x/%x/%x\n",
1598                  peid, priv->hwconfig.hwver, hwctg, priv->hwconfig.hwnumpes,
1599                  priv->hwconfig.hwnumrings, priv->hwconfig.hwnumraic,
1600                  priv->hwconfig.hiaver, priv->hwconfig.hwdataw,
1601                  priv->hwconfig.hwcfsize, priv->hwconfig.hwrfsize,
1602                  priv->hwconfig.ppver, priv->hwconfig.pever,
1603                  priv->hwconfig.algo_flags, priv->hwconfig.icever,
1604                  priv->hwconfig.ocever, priv->hwconfig.psever);
1605
1606         safexcel_configure(priv);
1607
1608         if (IS_ENABLED(CONFIG_PCI) && priv->data->version == EIP197_DEVBRD) {
1609                 /*
1610                  * Request MSI vectors for global + 1 per ring -
1611                  * or just 1 for older dev images
1612                  */
1613                 struct pci_dev *pci_pdev = pdev;
1614
1615                 ret = pci_alloc_irq_vectors(pci_pdev,
1616                                             priv->config.rings + 1,
1617                                             priv->config.rings + 1,
1618                                             PCI_IRQ_MSI | PCI_IRQ_MSIX);
1619                 if (ret < 0) {
1620                         dev_err(dev, "Failed to allocate PCI MSI interrupts\n");
1621                         return ret;
1622                 }
1623         }
1624
1625         /* Register the ring IRQ handlers and configure the rings */
1626         priv->ring = devm_kcalloc(dev, priv->config.rings,
1627                                   sizeof(*priv->ring),
1628                                   GFP_KERNEL);
1629         if (!priv->ring)
1630                 return -ENOMEM;
1631
1632         for (i = 0; i < priv->config.rings; i++) {
1633                 char wq_name[9] = {0};
1634                 int irq;
1635                 struct safexcel_ring_irq_data *ring_irq;
1636
1637                 ret = safexcel_init_ring_descriptors(priv,
1638                                                      &priv->ring[i].cdr,
1639                                                      &priv->ring[i].rdr);
1640                 if (ret) {
1641                         dev_err(dev, "Failed to initialize rings\n");
1642                         return ret;
1643                 }
1644
1645                 priv->ring[i].rdr_req = devm_kcalloc(dev,
1646                         EIP197_DEFAULT_RING_SIZE,
1647                         sizeof(*priv->ring[i].rdr_req),
1648                         GFP_KERNEL);
1649                 if (!priv->ring[i].rdr_req)
1650                         return -ENOMEM;
1651
1652                 ring_irq = devm_kzalloc(dev, sizeof(*ring_irq), GFP_KERNEL);
1653                 if (!ring_irq)
1654                         return -ENOMEM;
1655
1656                 ring_irq->priv = priv;
1657                 ring_irq->ring = i;
1658
1659                 irq = safexcel_request_ring_irq(pdev,
1660                                                 EIP197_IRQ_NUMBER(i, is_pci_dev),
1661                                                 is_pci_dev,
1662                                                 i,
1663                                                 safexcel_irq_ring,
1664                                                 safexcel_irq_ring_thread,
1665                                                 ring_irq);
1666                 if (irq < 0) {
1667                         dev_err(dev, "Failed to get IRQ ID for ring %d\n", i);
1668                         return irq;
1669                 }
1670
1671                 priv->ring[i].irq = irq;
1672                 priv->ring[i].work_data.priv = priv;
1673                 priv->ring[i].work_data.ring = i;
1674                 INIT_WORK(&priv->ring[i].work_data.work,
1675                           safexcel_dequeue_work);
1676
1677                 snprintf(wq_name, 9, "wq_ring%d", i);
1678                 priv->ring[i].workqueue =
1679                         create_singlethread_workqueue(wq_name);
1680                 if (!priv->ring[i].workqueue)
1681                         return -ENOMEM;
1682
1683                 priv->ring[i].requests = 0;
1684                 priv->ring[i].busy = false;
1685
1686                 crypto_init_queue(&priv->ring[i].queue,
1687                                   EIP197_DEFAULT_RING_SIZE);
1688
1689                 spin_lock_init(&priv->ring[i].lock);
1690                 spin_lock_init(&priv->ring[i].queue_lock);
1691         }
1692
1693         atomic_set(&priv->ring_used, 0);
1694
1695         ret = safexcel_hw_init(priv);
1696         if (ret) {
1697                 dev_err(dev, "HW init failed (%d)\n", ret);
1698                 return ret;
1699         }
1700
1701         ret = safexcel_register_algorithms(priv);
1702         if (ret) {
1703                 dev_err(dev, "Failed to register algorithms (%d)\n", ret);
1704                 return ret;
1705         }
1706
1707         return 0;
1708 }
1709
1710 static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv)
1711 {
1712         int i;
1713
1714         for (i = 0; i < priv->config.rings; i++) {
1715                 /* clear any pending interrupt */
1716                 writel(GENMASK(5, 0), EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_STAT);
1717                 writel(GENMASK(7, 0), EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_STAT);
1718
1719                 /* Reset the CDR base address */
1720                 writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
1721                 writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
1722
1723                 /* Reset the RDR base address */
1724                 writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
1725                 writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
1726         }
1727 }
1728
1729 /* for Device Tree platform driver */
1730
1731 static int safexcel_probe(struct platform_device *pdev)
1732 {
1733         struct device *dev = &pdev->dev;
1734         struct safexcel_crypto_priv *priv;
1735         int ret;
1736
1737         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
1738         if (!priv)
1739                 return -ENOMEM;
1740
1741         priv->dev = dev;
1742         priv->data = (struct safexcel_priv_data *)of_device_get_match_data(dev);
1743
1744         platform_set_drvdata(pdev, priv);
1745
1746         priv->base = devm_platform_ioremap_resource(pdev, 0);
1747         if (IS_ERR(priv->base)) {
1748                 dev_err(dev, "failed to get resource\n");
1749                 return PTR_ERR(priv->base);
1750         }
1751
1752         priv->clk = devm_clk_get(&pdev->dev, NULL);
1753         ret = PTR_ERR_OR_ZERO(priv->clk);
1754         /* The clock isn't mandatory */
1755         if  (ret != -ENOENT) {
1756                 if (ret)
1757                         return ret;
1758
1759                 ret = clk_prepare_enable(priv->clk);
1760                 if (ret) {
1761                         dev_err(dev, "unable to enable clk (%d)\n", ret);
1762                         return ret;
1763                 }
1764         }
1765
1766         priv->reg_clk = devm_clk_get(&pdev->dev, "reg");
1767         ret = PTR_ERR_OR_ZERO(priv->reg_clk);
1768         /* The clock isn't mandatory */
1769         if  (ret != -ENOENT) {
1770                 if (ret)
1771                         goto err_core_clk;
1772
1773                 ret = clk_prepare_enable(priv->reg_clk);
1774                 if (ret) {
1775                         dev_err(dev, "unable to enable reg clk (%d)\n", ret);
1776                         goto err_core_clk;
1777                 }
1778         }
1779
1780         ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
1781         if (ret)
1782                 goto err_reg_clk;
1783
1784         /* Generic EIP97/EIP197 device probing */
1785         ret = safexcel_probe_generic(pdev, priv, 0);
1786         if (ret)
1787                 goto err_reg_clk;
1788
1789         return 0;
1790
1791 err_reg_clk:
1792         clk_disable_unprepare(priv->reg_clk);
1793 err_core_clk:
1794         clk_disable_unprepare(priv->clk);
1795         return ret;
1796 }
1797
1798 static int safexcel_remove(struct platform_device *pdev)
1799 {
1800         struct safexcel_crypto_priv *priv = platform_get_drvdata(pdev);
1801         int i;
1802
1803         safexcel_unregister_algorithms(priv);
1804         safexcel_hw_reset_rings(priv);
1805
1806         clk_disable_unprepare(priv->reg_clk);
1807         clk_disable_unprepare(priv->clk);
1808
1809         for (i = 0; i < priv->config.rings; i++) {
1810                 irq_set_affinity_hint(priv->ring[i].irq, NULL);
1811                 destroy_workqueue(priv->ring[i].workqueue);
1812         }
1813
1814         return 0;
1815 }
1816
1817 static const struct safexcel_priv_data eip97ies_mrvl_data = {
1818         .version = EIP97IES_MRVL,
1819 };
1820
1821 static const struct safexcel_priv_data eip197b_mrvl_data = {
1822         .version = EIP197B_MRVL,
1823 };
1824
1825 static const struct safexcel_priv_data eip197d_mrvl_data = {
1826         .version = EIP197D_MRVL,
1827 };
1828
1829 static const struct safexcel_priv_data eip197_devbrd_data = {
1830         .version = EIP197_DEVBRD,
1831 };
1832
1833 static const struct safexcel_priv_data eip197c_mxl_data = {
1834         .version = EIP197C_MXL,
1835         .fw_little_endian = true,
1836 };
1837
1838 static const struct of_device_id safexcel_of_match_table[] = {
1839         {
1840                 .compatible = "inside-secure,safexcel-eip97ies",
1841                 .data = &eip97ies_mrvl_data,
1842         },
1843         {
1844                 .compatible = "inside-secure,safexcel-eip197b",
1845                 .data = &eip197b_mrvl_data,
1846         },
1847         {
1848                 .compatible = "inside-secure,safexcel-eip197d",
1849                 .data = &eip197d_mrvl_data,
1850         },
1851         {
1852                 .compatible = "inside-secure,safexcel-eip197c-mxl",
1853                 .data = &eip197c_mxl_data,
1854         },
1855         /* For backward compatibility and intended for generic use */
1856         {
1857                 .compatible = "inside-secure,safexcel-eip97",
1858                 .data = &eip97ies_mrvl_data,
1859         },
1860         {
1861                 .compatible = "inside-secure,safexcel-eip197",
1862                 .data = &eip197b_mrvl_data,
1863         },
1864         {},
1865 };
1866
1867 MODULE_DEVICE_TABLE(of, safexcel_of_match_table);
1868
1869 static struct platform_driver  crypto_safexcel = {
1870         .probe          = safexcel_probe,
1871         .remove         = safexcel_remove,
1872         .driver         = {
1873                 .name   = "crypto-safexcel",
1874                 .of_match_table = safexcel_of_match_table,
1875         },
1876 };
1877
1878 /* PCIE devices - i.e. Inside Secure development boards */
1879
1880 static int safexcel_pci_probe(struct pci_dev *pdev,
1881                                const struct pci_device_id *ent)
1882 {
1883         struct device *dev = &pdev->dev;
1884         struct safexcel_crypto_priv *priv;
1885         void __iomem *pciebase;
1886         int rc;
1887         u32 val;
1888
1889         dev_dbg(dev, "Probing PCIE device: vendor %04x, device %04x, subv %04x, subdev %04x, ctxt %lx\n",
1890                 ent->vendor, ent->device, ent->subvendor,
1891                 ent->subdevice, ent->driver_data);
1892
1893         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1894         if (!priv)
1895                 return -ENOMEM;
1896
1897         priv->dev = dev;
1898         priv->data = (struct safexcel_priv_data *)ent->driver_data;
1899
1900         pci_set_drvdata(pdev, priv);
1901
1902         /* enable the device */
1903         rc = pcim_enable_device(pdev);
1904         if (rc) {
1905                 dev_err(dev, "Failed to enable PCI device\n");
1906                 return rc;
1907         }
1908
1909         /* take ownership of PCI BAR0 */
1910         rc = pcim_iomap_regions(pdev, 1, "crypto_safexcel");
1911         if (rc) {
1912                 dev_err(dev, "Failed to map IO region for BAR0\n");
1913                 return rc;
1914         }
1915         priv->base = pcim_iomap_table(pdev)[0];
1916
1917         if (priv->data->version == EIP197_DEVBRD) {
1918                 dev_dbg(dev, "Device identified as FPGA based development board - applying HW reset\n");
1919
1920                 rc = pcim_iomap_regions(pdev, 4, "crypto_safexcel");
1921                 if (rc) {
1922                         dev_err(dev, "Failed to map IO region for BAR4\n");
1923                         return rc;
1924                 }
1925
1926                 pciebase = pcim_iomap_table(pdev)[2];
1927                 val = readl(pciebase + EIP197_XLX_IRQ_BLOCK_ID_ADDR);
1928                 if ((val >> 16) == EIP197_XLX_IRQ_BLOCK_ID_VALUE) {
1929                         dev_dbg(dev, "Detected Xilinx PCIE IRQ block version %d, multiple MSI support enabled\n",
1930                                 (val & 0xff));
1931
1932                         /* Setup MSI identity map mapping */
1933                         writel(EIP197_XLX_USER_VECT_LUT0_IDENT,
1934                                pciebase + EIP197_XLX_USER_VECT_LUT0_ADDR);
1935                         writel(EIP197_XLX_USER_VECT_LUT1_IDENT,
1936                                pciebase + EIP197_XLX_USER_VECT_LUT1_ADDR);
1937                         writel(EIP197_XLX_USER_VECT_LUT2_IDENT,
1938                                pciebase + EIP197_XLX_USER_VECT_LUT2_ADDR);
1939                         writel(EIP197_XLX_USER_VECT_LUT3_IDENT,
1940                                pciebase + EIP197_XLX_USER_VECT_LUT3_ADDR);
1941
1942                         /* Enable all device interrupts */
1943                         writel(GENMASK(31, 0),
1944                                pciebase + EIP197_XLX_USER_INT_ENB_MSK);
1945                 } else {
1946                         dev_err(dev, "Unrecognised IRQ block identifier %x\n",
1947                                 val);
1948                         return -ENODEV;
1949                 }
1950
1951                 /* HW reset FPGA dev board */
1952                 /* assert reset */
1953                 writel(1, priv->base + EIP197_XLX_GPIO_BASE);
1954                 wmb(); /* maintain strict ordering for accesses here */
1955                 /* deassert reset */
1956                 writel(0, priv->base + EIP197_XLX_GPIO_BASE);
1957                 wmb(); /* maintain strict ordering for accesses here */
1958         }
1959
1960         /* enable bus mastering */
1961         pci_set_master(pdev);
1962
1963         /* Generic EIP97/EIP197 device probing */
1964         rc = safexcel_probe_generic(pdev, priv, 1);
1965         return rc;
1966 }
1967
1968 static void safexcel_pci_remove(struct pci_dev *pdev)
1969 {
1970         struct safexcel_crypto_priv *priv = pci_get_drvdata(pdev);
1971         int i;
1972
1973         safexcel_unregister_algorithms(priv);
1974
1975         for (i = 0; i < priv->config.rings; i++)
1976                 destroy_workqueue(priv->ring[i].workqueue);
1977
1978         safexcel_hw_reset_rings(priv);
1979 }
1980
1981 static const struct pci_device_id safexcel_pci_ids[] = {
1982         {
1983                 PCI_DEVICE_SUB(PCI_VENDOR_ID_XILINX, 0x9038,
1984                                0x16ae, 0xc522),
1985                 .driver_data = (kernel_ulong_t)&eip197_devbrd_data,
1986         },
1987         {},
1988 };
1989
1990 MODULE_DEVICE_TABLE(pci, safexcel_pci_ids);
1991
1992 static struct pci_driver safexcel_pci_driver = {
1993         .name          = "crypto-safexcel",
1994         .id_table      = safexcel_pci_ids,
1995         .probe         = safexcel_pci_probe,
1996         .remove        = safexcel_pci_remove,
1997 };
1998
1999 static int __init safexcel_init(void)
2000 {
2001         int ret;
2002
2003         /* Register PCI driver */
2004         ret = pci_register_driver(&safexcel_pci_driver);
2005
2006         /* Register platform driver */
2007         if (IS_ENABLED(CONFIG_OF) && !ret) {
2008                 ret = platform_driver_register(&crypto_safexcel);
2009                 if (ret)
2010                         pci_unregister_driver(&safexcel_pci_driver);
2011         }
2012
2013         return ret;
2014 }
2015
2016 static void __exit safexcel_exit(void)
2017 {
2018         /* Unregister platform driver */
2019         if (IS_ENABLED(CONFIG_OF))
2020                 platform_driver_unregister(&crypto_safexcel);
2021
2022         /* Unregister PCI driver if successfully registered before */
2023         pci_unregister_driver(&safexcel_pci_driver);
2024 }
2025
2026 module_init(safexcel_init);
2027 module_exit(safexcel_exit);
2028
2029 MODULE_AUTHOR("Antoine Tenart <[email protected]>");
2030 MODULE_AUTHOR("Ofer Heifetz <[email protected]>");
2031 MODULE_AUTHOR("Igal Liberman <[email protected]>");
2032 MODULE_DESCRIPTION("Support for SafeXcel cryptographic engines: EIP97 & EIP197");
2033 MODULE_LICENSE("GPL v2");
2034 MODULE_IMPORT_NS(CRYPTO_INTERNAL);
2035
2036 MODULE_FIRMWARE("ifpp.bin");
2037 MODULE_FIRMWARE("ipue.bin");
2038 MODULE_FIRMWARE("inside-secure/eip197b/ifpp.bin");
2039 MODULE_FIRMWARE("inside-secure/eip197b/ipue.bin");
2040 MODULE_FIRMWARE("inside-secure/eip197d/ifpp.bin");
2041 MODULE_FIRMWARE("inside-secure/eip197d/ipue.bin");
2042 MODULE_FIRMWARE("inside-secure/eip197_minifw/ifpp.bin");
2043 MODULE_FIRMWARE("inside-secure/eip197_minifw/ipue.bin");