X-Git-Url: https://repo.jachan.dev/u-boot.git/blobdiff_plain/d44d46e9fafaae85b0ebbcdc53999537a199fa2f..55dabcc8f24598e2777f663de09ab55fbe1269da:/configs/ls1046aqds_qspi_defconfig

diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index 466d7ca6c8..f0c281ecae 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -2,12 +2,15 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x40100000
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
-CONFIG_FSL_LS_PPA=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_FSL_LS_PPA=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
@@ -20,10 +23,10 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_MISC_INIT_R=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -41,7 +44,7 @@ CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_SPANSION=y
@@ -52,8 +55,8 @@ CONFIG_PHY_REALTEK=y
 CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
+CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_PCIE_LAYERSCAPE_EP=y
@@ -65,7 +68,6 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y