X-Git-Url: https://repo.jachan.dev/u-boot.git/blobdiff_plain/5541543f686b43210fb92181003ff7175d4ab036..c680df7e84d3736ada08e4f0caa5a8b770e781ee:/configs/sama5d4ek_spiflash_defconfig

diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig
index 535031024b..2dd4cfca68 100644
--- a/configs/sama5d4ek_spiflash_defconfig
+++ b/configs/sama5d4ek_spiflash_defconfig
@@ -1,5 +1,7 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D4EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -7,23 +9,30 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x6000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
 CONFIG_DEBUG_UART=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
+CONFIG_SPL_TEXT_BASE=0x200000
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -34,6 +43,7 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
@@ -48,8 +58,12 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_NAND=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
@@ -58,13 +72,10 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xfc00c000
-CONFIG_DEBUG_UART_CLOCK=88000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
@@ -74,4 +85,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y