configs: Migrate CONFIG_SYS_TEXT_BASE

[u-boot.git] / configs / pm9263_defconfig

diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig
index 774b7e5c73b696da07ddd43430006a9ad0303c72..de3e7d6655939125eb7e2757d4f770e0274f159b 100644 (file)
--- a/configs/pm9263_defconfig
+++ b/configs/pm9263_defconfig
@@ -1,19 +1,47 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y

+CONFIG_SYS_TEXT_BASE=0

 CONFIG_TARGET_PM9263=y
 CONFIG_TARGET_PM9263=y

+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"

 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
 CONFIG_BOOTDELAY=3

+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 "
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_BOARD_EARLY_INIT_F=y

 CONFIG_SYS_PROMPT="u-boot-pm9263> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_SYS_PROMPT="u-boot-pm9263> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set

-# CONFIG_CMD_IMLS is not set

 # CONFIG_CMD_LOADS is not set
 # CONFIG_CMD_LOADS is not set

+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y

 CONFIG_CMD_USB=y
 CONFIG_CMD_USB=y

-# CONFIG_CMD_FPGA is not set

 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

+CONFIG_CMD_JFFS2=y
+CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y

 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y