Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY

[u-boot.git] / include / configs / work_92105.h

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index e260a637d6fd82de6e25207cca5eb5b53ac888f5..27a89195c07a7762839f8e38d0ca1edfe8e2a330 100644 (file)
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -29,24 +29,16 @@
 #define CONFIG_SYS_MALLOC_LEN          SZ_1M
 #define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE          SZ_128M
-#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + SZ_32K)
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - SZ_1M)
 
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + SZ_32K)
 
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + SZ_512K \
                                         - GENERATED_GBL_DATA_SIZE)
 
-/*
- * Serial Driver
- */
-#define CONFIG_SYS_LPC32XX_UART                5   /* UART5 - NS16550 */
-
 /*
  * Ethernet Driver
  */
 
-#define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
@@ -55,17 +47,12 @@
  * I2C driver
  */
 
-#define CONFIG_SYS_I2C_LPC32XX
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SPEED 350000
 
 /*
  * I2C EEPROM
  */
 
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
 /*
  * I2C RTC
  */
@@ -107,20 +94,10 @@
 
 #define CONFIG_LPC32XX_GPIO
 
-/*
- * SSP/SPI/DISPLAY
- */
-
-#define CONFIG_LPC32XX_SSP_TIMEOUT 100000
 /*
  * Environment
  */
 
-#define CONFIG_ENV_SIZE                        0x00020000
-#define CONFIG_ENV_OFFSET              0x00100000
-#define CONFIG_ENV_OFFSET_REDUND       0x00120000
-#define CONFIG_ENV_ADDR                        0x80000100
-
 /*
  * Boot Linux
  */
@@ -141,8 +118,6 @@
 /* Use the framework and generic lib */
 /* SPL will use serial */
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS  0x00040000
 #define CONFIG_SPL_PAD_TO 0x20000
 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */