Convert CONFIG_SYS_MONITOR_LEN to Kconfig

[u-boot.git] / include / configs / imx8mq_cm.h

diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index 9b786620ce376ce9c648df4c3552b798e9120cb1..6aad04e9e97e8c366fc229ee9fc20f6d2ee47731 100644 (file)
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -10,44 +10,24 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN           (32 * SZ_1M)
-
-#define CONFIG_SPL_MAX_SIZE            (124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300
-
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK               0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x2000  /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000  /* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CONFIG_MALLOC_F_ADDR           0x182000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 /* ENET Config */
 /* ENET1 */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_ETHPRIME                 "FEC"
-#endif
 
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
                func(MMC, mmc, 0) \
                func(MMC, mmc, 1) \
                func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
@@ -61,38 +41,22 @@
        "fdt_file=imx8mq-cm.dtb\0" \
        "initrd_addr=0x43800000\0"              \
        "bootm_size=0x10000000\0" \
-       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "mmcpart=1\0" \
+       "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 
 /* Link Definitions */
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE                                        0x40000000 /* 1 GB DDR */
 
-#define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_IMX_BOOTAUX
+#define CONFIG_MXC_UART_BASE           UART_BASE_ADDR(1)
 
 #define CONFIG_SYS_FSL_USDHC_NUM               2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
-#define CONFIG_SYS_MMC_IMG_LOAD_PART   1
-
 #endif