# objects depend on those (obviously)
multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
-multi-objs := $(multi-objs-y) $(multi-objs-m)
# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
# tell kbuild to descend
subdir-obj-y := $(filter %/built-in.o, $(obj-y))
-# $(obj-dirs) is a list of directories that contain object files
-obj-dirs := $(dir $(multi-objs) $(obj-y))
-
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
-obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
# These flags are needed for modversions and compiling, so we define them here
# already
# Note: Files that end up in two or more modules are compiled without the
# KBUILD_MODNAME definition. The reason is that any made-up name would
# differ in different configs.
-name-fix = $(subst $(comma),_,$(subst -,_,$1))
-basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
+name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
+basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
modname_flags = $(if $(filter 1,$(words $(modname))),\
- -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
+ -DKBUILD_MODNAME=$(call name-fix,$(modname)))
orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
$(ccflags-y) $(CFLAGS_$(basetarget).o)
# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
# and locates generated .h files
# FIXME: Replace both with specific CFLAGS* statements in the makefiles
-__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
-__a_flags = $(call flags,_a_flags)
-__cpp_flags = $(call flags,_cpp_flags)
+__c_flags = $(if $(obj),$(call addtree,-I$(src)) -I$(obj)) \
+ $(call flags,_c_flags)
+__a_flags = $(call flags,_a_flags)
+__cpp_flags = $(call flags,_cpp_flags)
endif
# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
$(__c_flags) $(modkern_cflags) \
- -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
+ $(basename_flags) $(modname_flags)
a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
$(__a_flags) $(modkern_aflags)
cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
$(__cpp_flags)
-ld_flags = $(LDFLAGS) $(ldflags-y)
+ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
# Try these files in order to find the U-Boot-specific .dtsi include file
u_boot_dtsi_options = $(strip $(wildcard $(dir $<)$(basename $(notdir $<))-u-boot.dtsi) \
# ---------------------------------------------------------------------------
quiet_cmd_ld = LD $@
-cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
- $(filter-out FORCE,$^) -o $@
+cmd_ld = $(LD) $(ld_flags) $(filter-out FORCE,$^) -o $@
# Objcopy
# ---------------------------------------------------------------------------
# DTC
# ---------------------------------------------------------------------------
+# Disable noisy checks by default
+ifeq ($(findstring 1,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wno-unit_address_vs_reg \
+ -Wno-unit_address_format \
+ -Wno-avoid_unnecessary_addr_size \
+ -Wno-alias_paths \
+ -Wno-graph_child_address \
+ -Wno-graph_port \
+ -Wno-unique_unit_address \
+ -Wno-simple_bus_reg \
+ -Wno-pci_device_reg
+
+# U-Boot specific disables
+DTC_FLAGS += -Wno-pci_bridge \
+ -Wno-pci_device_bus_num
+endif
+
+ifneq ($(findstring 2,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wnode_name_chars_strict \
+ -Wproperty_name_chars_strict
+endif
+
+DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
+
# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_dt_S_dtb= DTB $@
# Modified for U-Boot
$(obj)/%.dtb.S: $(obj)/%.dtb
$(call cmd,dt_S_dtb)
-ifeq ($(CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY),y)
+ifeq ($(CONFIG_OF_LIBFDT_OVERLAY),y)
DTC_FLAGS += -@
endif
# Bring in any U-Boot-specific include at the end of the file
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
(cat $<; $(if $(u_boot_dtsi),echo '$(pound)include "$(u_boot_dtsi)"')) > $(pre-tmp); \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
+ $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
$(DTC) -O dtb -o $@ -b 0 \
-i $(dir $<) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) || \
(echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
; \
- cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) ; \
- sed -i "s:$(pre-tmp):$(<):" $(depfile)
+ sed "s:$(pre-tmp):$(<):" $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
$(obj)/%.dtb: $(src)/%.dts FORCE
$(call if_changed_dep,dtc)
$(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_freestanding.o
$(call cmd,efi_ld)
+targets += $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_freestanding.o
+
+CFLAGS_REMOVE_efi_reloc.o := $(LTO_CFLAGS)
+CFLAGS_REMOVE_efi_freestanding.o := $(LTO_CFLAGS)
+
# ACPI
# ---------------------------------------------------------------------------
#
quiet_cmd_acpi_c_asl= ASL $<
cmd_acpi_c_asl= \
- $(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -P $(UBOOTINCLUDE) \
- -o $(ASL_TMP) $< && \
+ $(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -D__ACPI__ \
+ -P $(UBOOTINCLUDE) -o $(ASL_TMP) $< && \
iasl -p $@ -tc $(ASL_TMP) $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \
mv $(patsubst %.c,%.hex,$@) $@
$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
-P u-boot,dm-pre-reloc -P u-boot,dm-spl -P u-boot,dm-tpl \
$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
+
+# fdt_rm_props
+# ---------------------------------------------------------------------------
+# Pass the original device tree file through fdtgrep. This removes various
+# unused properties. The output is typically a smaller device tree file.
+quiet_cmd_fdt_rm_props = FDTGREP $@
+ cmd_fdt_rm_props = cat $< | $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+ $(addprefix -P ,$(subst $\",,$(CONFIG_OF_REMOVE_PROPS)))
+
+# ASM offsets
+# ---------------------------------------------------------------------------
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-offsets
+ "s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \
+ /^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+ (set -e; \
+ echo "#ifndef $2"; \
+ echo "#define $2"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by Kbuild"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne $(sed-offsets); \
+ echo ""; \
+ echo "#endif" )
+endef
projects / u-boot.git / blobdiff