Merge branch '2023-04-24-TI-platform-updates'

[u-boot.git] / configs / phycore-imx8mp_defconfig

diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 32d538c8bbbb4f5cd12ca8fa43161f54f6479dce..846c8793cca32431625b292f1c449abff07c58f6 100644 (file)
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -1,10 +1,10 @@
 CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
-CONFIG_SYS_TEXT_BASE=0x40200000
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x10000
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x3C0000
 CONFIG_SYS_I2C_MXC_I2C1=y
@@ -12,32 +12,52 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mp-phyboard-pollux-rdk"
 CONFIG_SPL_TEXT_BASE=0x920000
 CONFIG_TARGET_PHYCORE_IMX8MP=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x960000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x98fc00
+CONFIG_SPL_BSS_MAX_SIZE=0x400
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SEPARATE_BSS=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_POWER_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_SIZE=4096
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
@@ -66,24 +86,18 @@ CONFIG_CLK_IMX8MP=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 # CONFIG_SPL_DM_I2C is not set
-CONFIG_SYS_I2C_MXC=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
-CONFIG_SYS_EEPROM_SIZE=4096
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
-CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_ES_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_TI_DP83867=y
-CONFIG_DM_ETH=y
 CONFIG_DM_ETH_PHY=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
@@ -91,9 +105,13 @@ CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
+CONFIG_SPL_POWER_LEGACY=y
+CONFIG_POWER_PCA9450=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_POWER_I2C=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y