Merge patch series "dwc3: gadget: properly fix cache operations"

[u-boot.git] / configs / ls1012aqds_tfa_SECURE_BOOT_defconfig

diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
index c2996a1372e1cc71d78b0a5f9b4e57c5176a7918..8dc27474200d199661f25987256a73be6c82765c 100644 (file)
--- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
@@ -5,33 +5,35 @@ CONFIG_TFABOOT=y
 CONFIG_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_LEN=0x500000
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
 CONFIG_QSPI_AHB_INIT=y
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_PCI=y
 CONFIG_NXP_ESBC=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
 CONFIG_PCIE1=y
 CONFIG_FSL_QIXIS=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
-CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 # CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_PBSIZE=532
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
@@ -58,8 +60,6 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
-CONFIG_SF_DEFAULT_SPEED=10000000
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
@@ -69,12 +69,10 @@ CONFIG_SPI_FLASH_SST=y
 CONFIG_FSL_PFE=y
 CONFIG_E1000=y
 CONFIG_NVME_PCI=y
-CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_PCF8563=y
 CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y