Convert CONFIG_SYS_I2C_MXC et al to Kconfig

[u-boot.git] / include / configs / mx6slevk.h

diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index e54982af2e88c96733f3669c84cd6d5fb2d21e79..92d63ebfcb449d6fcb4ff3abe0ade42e38c56f66 100644 (file)
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6SL EVK board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,41 +14,16 @@
 #include "imx6_spl.h"
 #endif
 
-#define MACH_TYPE_MX6SLEVK             4307
-#define CONFIG_MACH_TYPE               MACH_TYPE_MX6SLEVK
+#define CONFIG_MACH_TYPE               MACH_TYPE_MX6SL_EVK
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_IPS_BASE_ADDR
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED             100000
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE                   ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE            RMII
-#define CONFIG_FEC_MXC_PHYADDR         0
-
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_SMSC
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \
@@ -62,9 +36,9 @@
        "ip_dyn=yes\0" \
        "mmcdev=1\0" \
        "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+       "finduuid=part uuid mmc 1:2 uuid\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
+               "root=PARTUUID=${uuid} rootwait rw\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
@@ -72,6 +46,7 @@
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
+               "run finduuid; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
@@ -125,13 +100,8 @@
           "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + SZ_512M)
-
-#define CONFIG_STACKSIZE               SZ_128K
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -144,46 +114,15 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_SIZE                        SZ_8K
-
-#if defined CONFIG_SYS_BOOT_SPINOR
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET               (768 * 1024)
-#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
-#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
-#else
-#define CONFIG_ENV_OFFSET              (8 * SZ_64K)
-#define CONFIG_ENV_IS_IN_MMC
-#endif
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS          0
-#define CONFIG_SF_DEFAULT_CS           0
-#define CONFIG_SF_DEFAULT_SPEED                20000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#endif
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #endif
 
 #define CONFIG_SYS_FSL_USDHC_NUM       3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         1       /* SDHC2*/
-#endif
-
-#define CONFIG_IMX_THERMAL
 
 #endif                         /* __CONFIG_H */