configs: Migrate all of the existing USB symbols, except fastboot

[u-boot.git] / include / configs / colibri_imx6.h

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index c4765ebc77706c1b974a16de05aa3012a8bd4439..96bc1e9edc8484f42cf58e7ff48f06ca9827caf4 100644 (file)
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -10,7 +10,6 @@
 #define __CONFIG_H
 
 #include "mx6_common.h"
-#define CONFIG_SYS_THUMB_BUILD
 
 #undef CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* Calls show_board_info() */
@@ -18,7 +17,7 @@
 #define CONFIG_SYS_GENERIC_BOARD
 
 #include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
+#include <asm/mach-imx/gpio.h>
 
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
@@ -53,7 +52,6 @@
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /* OCOTP Configs */
-#define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 #endif
@@ -66,7 +64,6 @@
 
 #define CONFIG_SUPPORT_EMMC_BOOT       /* eMMC specific */
 #define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FAT_WRITE
 
 /* Network */
 #define CONFIG_FEC_MXC
@@ -75,8 +72,6 @@
 #define CONFIG_FEC_XCV_TYPE            RMII
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         1
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 #define CONFIG_IP_DEFRAG
 #define CONFIG_TFTP_BLOCKSIZE          16352
 #define CONFIG_TFTP_TSIZE
@@ -88,22 +83,15 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_KEYBOARD
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
-#endif /* CONFIG_USB_KEYBOARD */
 /* Client */
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 #define CONFIG_USBD_HS
 
 #define CONFIG_USB_GADGET_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_G_DNL_MANUFACTURER      "Toradex"
 /* USB DFU */
 #define CONFIG_DFU_MMC
 
 /* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
 #define CONFIG_MXC_GPIO
 
 /* Framebuffer and LCD */
@@ -117,16 +105,13 @@
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK               260000000
-#define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_CMD_BMP
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
 
 /* Command definition */
 #undef CONFIG_CMD_LOADB
@@ -172,6 +157,7 @@
                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
 #define MEM_LAYOUT_ENV_SETTINGS \
+       "bootm_size=0x10000000\0" \
        "fdt_addr_r=0x12000000\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
@@ -274,13 +260,9 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_SIZE                        (8 * 1024)
 
-#define CONFIG_ENV_IS_IN_MMC
-
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_OFFSET              (-CONFIG_ENV_SIZE + \
@@ -295,6 +277,4 @@
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
-#define CONFIG_CRC32_VERIFY
-
 #endif /* __CONFIG_H */