Convert all of CONFIG_CONS_INDEX to Kconfig

[u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index b2dc1890c743a348ca889dac165ce23c79c5b285..0087e1d17ca52db9ff3e25d350cbf81ab36b9647 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -8,8 +8,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
@@ -17,8 +15,6 @@
 #define CONFIG_MPC837x         1 /* MPC837x CPU specific */
 #define CONFIG_MPC837XEMDS     1 /* MPC837XEMDS board specific */
 
-#define        CONFIG_SYS_TEXT_BASE    0xFE000000
-
 /*
  * System Clock Setup
  */
@@ -99,7 +95,6 @@
  */
 #define CONFIG_SYS_OBIR                0x31100000
 
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_HWCONFIG
 
@@ -281,7 +276,6 @@
 /*
  * NAND Flash on the Local Bus
  */
-#define CONFIG_CMD_NAND                1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_NAND_FSL_ELBC   1
 
@@ -307,7 +301,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -379,13 +372,9 @@ extern int board_pci_host_broken(void);
 #define CONFIG_PQ_MDS_PIB      1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB  1 /* fixup device tree for the DR USB */
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
@@ -428,9 +417,6 @@ extern int board_pci_host_broken(void);
 /*
  * SATA
  */
-#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
-
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1_OFFSET        0x18000
@@ -443,22 +429,17 @@ extern int board_pci_host_broken(void);
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-       #define CONFIG_ENV_IS_IN_FLASH  1
        #define CONFIG_ENV_ADDR         \
                        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
        #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
        #define CONFIG_ENV_SIZE         0x2000
 #else
-       #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
-       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
        #define CONFIG_ENV_SIZE         0x2000
 #endif
@@ -470,52 +451,24 @@ extern int board_pci_host_broken(void);
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DATE
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
-#endif
-
-                               /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-                               /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -656,12 +609,8 @@ extern int board_pci_host_broken(void);
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
-#undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
        "consoledev=ttyS0\0"                                            \