arm: dts: bcm283x: Add minimal smbios information

[u-boot.git] / configs / sama5d27_wlsom1_ek_qspiflash_defconfig

diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
index 3cb1ff62aa95c6d37270cf3cff860cf03d8020e7..5902a933c1ad18ef1f25f4932ecbcc8b2581fb31 100644 (file)
--- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
+++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
@@ -2,24 +2,23 @@ CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D27_WLSOM1_EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ENV_SECT_SIZE=0x1000
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_wlsom1_ek"
 CONFIG_SPL_TEXT_BASE=0x200000
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_wlsom1_ek"
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
@@ -35,6 +34,7 @@ CONFIG_SPL_DISPLAY_PRINT=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_SPL_AT91_MCK_BYPASS=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -104,7 +104,6 @@ CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y