nand: mxc: Switch NAND SPL to generic SPL

[u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 462556d60fda19990c3c8ec3a023150f24eb680d..8d0e2b8552f06e84e421f15aa2c07a746fe5dfdf 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -22,9 +22,9 @@
 #
 
 VERSION = 2013
-PATCHLEVEL = 01
+PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc1
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -230,10 +230,6 @@ endif
 # U-Boot objects....order is important (i.e. start must be first)
 
 OBJS  = $(CPUDIR)/start.o
-ifeq ($(CPU),x86)
-RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
-RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
-endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
@@ -241,7 +237,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
+OBJS := $(addprefix $(obj),$(OBJS))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
@@ -268,6 +264,7 @@ LIBS-y += fs/libfs.o \
        fs/fdos/libfdos.o \
        fs/jffs2/libjffs2.o \
        fs/reiserfs/libreiserfs.o \
+       fs/sandbox/libsandboxfs.o \
        fs/ubifs/libubifs.o \
        fs/yaffs2/libyaffs2.o \
        fs/zfs/libzfs.o
@@ -276,6 +273,7 @@ LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
 LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o
@@ -334,7 +332,7 @@ LIBS-y += api/libapi.o
 LIBS-y += post/libpost.o
 LIBS-y += test/libtest.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
@@ -348,7 +346,7 @@ endif
 ifeq ($(SOC),exynos)
 LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
 LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
 LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
@@ -413,7 +411,7 @@ ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 
 # enable combined SPL/u-boot/dtb rules for tegra
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
 ALL-y += $(obj)u-boot-dtb-tegra.bin
 else
@@ -467,9 +465,8 @@ $(obj)u-boot.img:   $(obj)u-boot.bin
                        sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
                -d $< $@
 
-$(obj)u-boot.imx:       $(obj)u-boot.bin
-               $(obj)tools/mkimage -n  $(CONFIG_IMX_CONFIG) -T imximage \
-               -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(obj)u-boot.imx: $(obj)u-boot.bin depend
+               $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
 
 $(obj)u-boot.kwb:       $(obj)u-boot.bin
                $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
@@ -486,8 +483,11 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin
 $(obj)u-boot.dis:      $(obj)u-boot
                $(OBJDUMP) -d $< > $@
 
+
+
 $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-               $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+               $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+                       -I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
                cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
                rm $(obj)spl/u-boot-spl-pad.bin
 
@@ -508,10 +508,11 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
                        $(obj)u-boot.ais
 
 # Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-               elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+               elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
                        -o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -530,7 +531,7 @@ $(obj)u-boot.spr:   $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
                        conv=notrunc 2>/dev/null
                cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
 
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
 nodtb=dtb
 dtbfile=$(obj)u-boot.dtb
@@ -555,10 +556,8 @@ GEN_UBOOT = \
                        $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
 else
 GEN_UBOOT = \
-               UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
-               sed  -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
                cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
-                       $$UNDEF_LST $(__OBJS) \
+                       $(__OBJS) \
                        --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
                        -Map u-boot.map -o u-boot
 endif
@@ -591,11 +590,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot
 $(LDSCRIPT):   depend
                $(MAKE) -C $(dir $@) $(notdir $@)
 
-# The following line expands into whole rule which generates u-boot.lst,
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
-$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+$(obj)u-boot.lds: $(LDSCRIPT)
                $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl:      $(TIMESTAMP_FILE) $(VERSION_FILE) depend
@@ -831,7 +826,6 @@ clean:
               $(obj)board/matrix_vision/*/bootscript.img                 \
               $(obj)board/voiceblue/eeprom                               \
               $(obj)u-boot.lds                                           \
-              $(obj)include/u-boot.lst                                   \
               $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]          \
               $(obj)arch/blackfin/cpu/init.{lds,elf}
        @rm -f $(obj)include/bmp_logo.h
@@ -843,7 +837,8 @@ clean:
        @$(MAKE) -s -C doc/DocBook/ cleandocs
        @find $(OBJTREE) -type f \
                \( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
-               -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
+               -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \
+               -o -name '*.cfgtmp' \) -print \
                | xargs rm -f
 
 # Removes everything not needed for testing u-boot
@@ -868,8 +863,8 @@ clobber:    tidy
        @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
        @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
        @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
-       @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
-       @rm -f $(obj)MLO
+       @rm -f $(obj)spl/u-boot-spl.lds
+       @rm -f $(obj)MLO MLO.byteswap
        @rm -f $(obj)SPL
        @rm -f $(obj)tools/xway-swap-bytes
        @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c