Merge patch series "dwc3: gadget: properly fix cache operations"

[u-boot.git] / configs / imx8mq_phanbell_defconfig

diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig
index 16cd4cc70c072efbb4bbd826ba625f20986ca28e..487dae672abc4aca44a48b16f5b4ad1879ca7109 100644 (file)
--- a/configs/imx8mq_phanbell_defconfig
+++ b/configs/imx8mq_phanbell_defconfig
@@ -14,41 +14,41 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mq-phanbell"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MQ_PHANBELL=y
+CONFIG_DM_RESET=y
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x187ff0
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x180000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
-CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SD_BOOT=y
+CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0x2b000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x180000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x187ff0
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=64
 # CONFIG_BOOTM_NETBSD is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
@@ -92,7 +92,6 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_POWER_I2C=y
-CONFIG_DM_RESET=y
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y