]> Git Repo - u-boot.git/blobdiff - configs/evb-rk3308_defconfig
Merge patch series "Fixes to allow 'ut bootm' to pass when run interactively"
[u-boot.git] / configs / evb-rk3308_defconfig
index eb17b3d5e1f47ae7a28bde99b9515e8b6d240873..c8e1753b281229ce370876e111610c5c2941d4d0 100644 (file)
@@ -2,56 +2,35 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_SYS_TEXT_BASE=0x00600000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3308-evb"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
-CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_TARGET_EVB_RK3308=y
-CONFIG_SPL_STACK_R_ADDR=0xc00000
-CONFIG_DEBUG_UART_BASE=0xFF0C0000
-CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFF0E0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+# CONFIG_DEBUG_UART_BOARD_INIT is not set
 CONFIG_DEBUG_UART=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=0
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-evb.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x400000
-CONFIG_SPL_STACK_R=y
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_SLEEP is not set
-# CONFIG_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_CMD_RNG=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_REGULATOR=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_REGMAP=y
 CONFIG_SYSCON=y
@@ -62,28 +41,28 @@ CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_DM_ETH=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PHY=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PINCTRL=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
-CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSINFO=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_DWC2=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_SPL_TINY_MEMSET=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
 CONFIG_LZO=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
This page took 0.027344 seconds and 4 git commands to generate.