Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig

[u-boot.git] / include / configs / PMC405DE.h

diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index a4275512816b5aeaf89bf297da46712f4623cfc2..7e06fc7abaeaa251f65fb449987315b66335d8bd 100644 (file)
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -2,30 +2,13 @@
  * (C) Copyright 2009
  * Matthias Fuchs, esd gmbh germany, [email protected]
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #define CONFIG_405EP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_PMC405DE                1       /* ...on a PMC405DE board       */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
@@ -37,7 +20,6 @@
 #define CONFIG_SYS_CLK_FREQ    33330000 /* external frequency to pll   */
 
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
 
 #undef  CONFIG_BOOTARGS
 #undef  CONFIG_BOOTCOMMAND
@@ -69,23 +51,12 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #undef  CONFIG_WATCHDOG                        /* watchdog disabled */
 #define CONFIG_SDRAM_BANK0     1       /* init onboard SDRAM bank 0 */
@@ -95,7 +66,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
 
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -103,13 +73,11 @@
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 
 #define CONFIG_SYS_DEVICE_NULLDEV      1       /* include nulldev device */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  1       /* don't print console info */
 
 #define CONFIG_SYS_MEMTEST_START       0x0100000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x3000000 /* 1 ... 48 MB in DRAM */
 
 #define CONFIG_CONS_INDEX      2       /* Use UART1                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -120,19 +88,8 @@
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1       /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_LOOPW           1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
-
-#define CONFIG_AUTOBOOT_KEYED  1
-#define CONFIG_AUTOBOOT_PROMPT \
-       "Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
 
 /*
  * PCI stuff
@@ -195,7 +152,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO    1 /* 'E' for empty sector (flinfo) */
 #define CONFIG_SYS_FLASH_QUIET_TEST    1 /* don't warn upon unknown flash */
 
-
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
@@ -217,10 +173,11 @@
 /*
  * I2C EEPROM (24W16) for environment
  */
-#define CONFIG_HARD_I2C                        /* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM 24W16 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address */