xilinx: versal: Setup 30MHz as default spi frequency

[u-boot.git] / configs / imx8mm_data_modul_edm_sbc_defconfig

diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index e2bca406113fff0e25fcca375b82355ead79dfe5..e724607c6ee7769bc4b31857ac9c987394b931c4 100644 (file)
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -5,7 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x1000000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_SF_DEFAULT_SPEED=50000000
 CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_OFFSET=0xFFFC0000
@@ -14,7 +14,6 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mm-data-modul-edm-sbc"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MM_DATA_MODUL_EDM_SBC=y
-CONFIG_SYS_PROMPT="u-boot=> "
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=1048576
@@ -54,10 +53,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
@@ -67,6 +66,7 @@ CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot=> "
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
@@ -157,7 +157,6 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MM=y
-CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
 CONFIG_DFU_TFTP=y
 CONFIG_DFU_TIMEOUT=y
 CONFIG_DFU_MMC=y