Merge branch 'master' of git://git.denx.de/u-boot-spi

[u-boot.git] / include / configs / T1040QDS.h

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 5ebc8709aa133366fadec271febde730ae750e8a..aa0f802233ac0d6194b5fa20536a3ce09e0c031f 100644 (file)
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -28,7 +28,6 @@
  */
 #define CONFIG_T1040QDS
 #define CONFIG_PHYS_64BIT
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_RAMBOOT_PBL
@@ -308,7 +307,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -381,7 +379,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xfdd00000      /* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH     0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW      0xfe0ec000
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW      0xfe03c000
 /* The assembler doesn't like typecast */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
        ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
@@ -400,7 +398,6 @@ unsigned long get_board_ddr_clk(void);
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0)/2)
@@ -412,7 +409,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x11C600)
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
-#define CONFIG_SERIAL_MULTI            /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 /* Use the HUSH parser */
@@ -439,15 +435,6 @@ unsigned long get_board_ddr_clk(void);
 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
@@ -486,11 +473,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_EON
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
@@ -550,7 +532,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-#define CONFIG_E1000
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -597,12 +578,14 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
+#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
 
 /* Qman/Bman */
@@ -692,6 +675,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
+/* Enable VSC9953 L2 Switch driver */
+#define CONFIG_VSC9953
+#define CONFIG_VSC9953_CMD
+#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR       0x14
+#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR       0x18
+
 /*
  * Dynamic MTD Partition support with mtdparts
  */
@@ -718,12 +707,9 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
@@ -731,11 +717,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SETEXPR
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #endif
 
 /* Hash command with SHA acceleration supported in hardware */
@@ -842,9 +826,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND             CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
-#define CONFIG_CMD_BLOB
-#endif
 
 #endif /* __CONFIG_H */