ARM: adjust arm-smccc code for use in U-Boot

[u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 08749644f43ee41bca0e9a8119718c7afd42738b..131d62e0a791e41deab7958f31ac1dd458b264b1 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 #
 
 VERSION = 2017
-PATCHLEVEL = 01
+PATCHLEVEL = 05
 SUBLEVEL =
 EXTRAVERSION = -rc2
 NAME =
@@ -348,7 +348,7 @@ OBJCOPY             = $(CROSS_COMPILE)objcopy
 OBJDUMP                = $(CROSS_COMPILE)objdump
 AWK            = awk
 PERL           = perl
-PYTHON         = python
+PYTHON         ?= python
 DTC            = dtc
 CHECK          = sparse
 
@@ -371,7 +371,7 @@ export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
 export MAKE AWK PERL PYTHON
-export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
+export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
 export KBUILD_CFLAGS KBUILD_AFLAGS
@@ -482,6 +482,13 @@ else
 # Build targets only - this includes vmlinux, arch specific targets, clean
 # targets and others. In general all targets except *config targets.
 
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf
+       $(Q)$(MAKE) $(build)=$(@)
+
 ifeq ($(dot-config),1)
 # Read in config
 -include include/config/auto.conf
@@ -617,8 +624,9 @@ KBUILD_CFLAGS += $(KCFLAGS)
 UBOOTINCLUDE    := \
                -Iinclude \
                $(if $(KBUILD_SRC), -I$(srctree)/include) \
-               $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \
-                       -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
+               $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
+                       $(if $(CONFIG_HAS_THUMB2),, \
+                               -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
                -I$(srctree)/arch/$(ARCH)/include \
                -include $(srctree)/include/linux/kconfig.h
 
@@ -763,7 +771,11 @@ ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
 endif
 endif
 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+endif
 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
@@ -793,6 +805,10 @@ ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
 endif
 
 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
+
+# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
+LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
+
 ifneq ($(CONFIG_SYS_TEXT_BASE),)
 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
 endif
@@ -809,9 +825,11 @@ cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 quiet_cmd_efipayload = OBJCOPY $@
 cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
 
+MKIMAGEOUTPUT ?= /dev/null
+
 quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
-       $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+       $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
@@ -823,6 +841,10 @@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 
 cfg: u-boot.cfg
 
+quiet_cmd_cfgcheck = CFGCHK  $2
+cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
+               $(srctree)/scripts/config_whitelist.txt $(srctree)
+
 all:           $(ALL-y)
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
        @echo "===================== WARNING ======================"
@@ -834,8 +856,7 @@ endif
        @# Check that this build does not use CONFIG options that we do not
        @# know about unless they are in Kconfig. All the existing CONFIG
        @# options are whitelisted, so new ones should not be added.
-       $(srctree)/scripts/check-config.sh u-boot.cfg \
-               $(srctree)/scripts/config_whitelist.txt ${srctree} 1>&2
+       $(call cmd,cfgcheck,u-boot.cfg)
 
 PHONY += dtbs
 dtbs: dts/dt.dtb
@@ -877,7 +898,7 @@ u-boot.hex u-boot.srec: u-boot FORCE
        $(call if_changed,objcopy)
 
 OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
-               $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
+               $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec)
 
 binary_size_check: u-boot-nodtb.bin FORCE
        @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
@@ -938,6 +959,11 @@ else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
        -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
+       -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+       -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
+CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
 endif
 
 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
@@ -946,12 +972,13 @@ MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
        -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 
 MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
-       -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+       -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+       $(if $(KEYDIR),-k $(KEYDIR))
 
 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
                -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 
-u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
+u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
                $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
        $(call if_changed,mkimage)
 
@@ -1065,8 +1092,9 @@ quiet_cmd_ldr = LD      $@
 cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
               $(filter-out FORCE,$^) -o $@
 
-u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
-               $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
+u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
+               $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+               $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
        $(call if_changed,binman)
 
 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
@@ -1321,13 +1349,17 @@ spl/u-boot-spl: tools prepare \
 spl/sunxi-spl.bin: spl/u-boot-spl
        @:
 
+spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
+       @:
+
 spl/u-boot-spl.sfp: spl/u-boot-spl
        @:
 
 spl/boot.bin: spl/u-boot-spl
        @:
 
-tpl/u-boot-tpl.bin: tools prepare
+tpl/u-boot-tpl.bin: tools prepare \
+               $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
        $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
 
 TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
@@ -1405,7 +1437,7 @@ CLEAN_DIRS  += $(MODVERDIR) \
               $(foreach d, spl tpl, $(patsubst %,$d/%, \
                        $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
 
-CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
               boot* u-boot* MLO* SPL System.map
 
 # Directories & files removed with 'make mrproper'
@@ -1526,11 +1558,6 @@ tests:
        $(Q)$(MAKE) $(build)=scripts build_docproc
        $(Q)$(MAKE) $(build)=doc/DocBook $@
 
-# Dummies...
-PHONY += prepare scripts
-prepare: ;
-scripts: ;
-
 endif #ifeq ($(config-targets),1)
 endif #ifeq ($(mixed-targets),1)