Convert CONFIG_SYS_MALLOC_LEN to Kconfig

[u-boot.git] / include / configs / mv-common.h

diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 1721fefd14651f279f37f482d2a93c95641e5beb..052d4b9ca577e388cd8897f2ed04b3e480e5261e 100644 (file)
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2010
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <[email protected]>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -17,25 +16,19 @@
 #ifndef _MV_COMMON_H
 #define _MV_COMMON_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL         1
 
 /*
  * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
  */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define        CONFIG_SYS_TEXT_BASE    0x00600000
-#endif /* CONFIG_SYS_TEXT_BASE */
 
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE  0x00000000
 
-/*
- * CLKs configurations
- */
-
 /*
  * NS16550 Configuration
  */
@@ -46,17 +39,7 @@
 #define CONFIG_SYS_NS16550_COM1                MV_UART_CONSOLE_BASE
 #endif
 
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX      1       /*Console on UART0 */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, \
-                                         115200,230400, 460800, 921600 }
 /* auto boot */
-#define CONFIG_PREBOOT
 
 /*
  * For booting Linux, the board info and command line data
@@ -69,38 +52,15 @@
 
 #define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (1024 * 1024 * 4) /* 4MiB for malloc() */
-
 /*
  * Other required minimal configurations
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT   /* call arch_cpu_init() */
-#define CONFIG_SYS_LOAD_ADDR   0x00800000      /* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00800000    /* 8M */
-#define CONFIG_SYS_MEMTEST_END 0x00ffffff      /*(_16M -1) */
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000    /* Rst Vector Adr */
 #define CONFIG_SYS_MAXARGS     32      /* max number of command args */
 
 /* ====> Include platform Common Definitions */
 #include <asm/arch/config.h>
 
-/*
- * DRAM Banks configuration, Custom config can be done in <board>.h
- */
-#ifndef CONFIG_NR_DRAM_BANKS
-#define CONFIG_NR_DRAM_BANKS   CONFIG_NR_DRAM_BANKS_MAX
-#else
-#if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX)
-#error CONFIG_NR_DRAM_BANKS Configurated more than available
-#endif
-#endif /* CONFIG_NR_DRAM_BANKS */
-
 /* ====> Include driver Common Definitions */
 /*
  * Common NAND configuration
@@ -109,18 +69,4 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #endif
 
-/*
- * Common SPI Flash configuration
- */
-#ifdef CONFIG_CMD_SF
-#endif
-
-/*
- * File system
- */
-#ifdef CONFIG_SYS_MVFS
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#endif
-
 #endif /* _MV_COMMON_H */