#include <dt-bindings/reset/sun8i-a83t-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
#size-cells = <0>;
cpu0: cpu@0 {
- clocks = <&ccu CLK_C0CPUX>;
- clock-names = "cpu";
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <1>;
+ #cooling-cells = <2>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <2>;
+ #cooling-cells = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <3>;
+ #cooling-cells = <2>;
};
cpu100: cpu@100 {
- clocks = <&ccu CLK_C1CPUX>;
- clock-names = "cpu";
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x100>;
+ #cooling-cells = <2>;
};
- cpu@101 {
+ cpu101: cpu@101 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x101>;
+ #cooling-cells = <2>;
};
- cpu@102 {
+ cpu102: cpu@102 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x102>;
+ #cooling-cells = <2>;
};
- cpu@103 {
+ cpu103: cpu@103 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x103>;
+ #cooling-cells = <2>;
};
};
status = "disabled";
};
- memory {
- reg = <0x40000000 0x80000000>;
- device_type = "memory";
- };
-
- cpu0_opp_table: opp_table0 {
+ cpu0_opp_table: opp-table-cluster0 {
compatible = "operating-points-v2";
opp-shared;
};
};
- cpu1_opp_table: opp_table1 {
+ cpu1_opp_table: opp-table-cluster1 {
compatible = "operating-points-v2";
opp-shared;
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-a83t-de2-clk";
- reg = <0x01000000 0x100000>;
- clocks = <&ccu CLK_PLL_DE>,
- <&ccu CLK_BUS_DE>;
- clock-names = "mod",
- "bus";
+ reg = <0x01000000 0x10000>;
+ clocks = <&ccu CLK_BUS_DE>,
+ <&ccu CLK_PLL_DE>;
+ clock-names = "bus",
+ "mod";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
+ rotate: rotate@1020000 {
+ compatible = "allwinner,sun8i-a83t-de2-rotate";
+ reg = <0x1020000 0x10000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&display_clocks CLK_BUS_ROT>,
+ <&display_clocks CLK_ROT>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_ROT>;
+ };
+
mixer0: mixer@1100000 {
compatible = "allwinner,sun8i-a83t-de2-mixer-0";
reg = <0x01100000 0x100000>;
reg = <0>;
remote-endpoint = <&tcon0_in_mixer0>;
};
+
+ mixer0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_mixer0>;
+ };
};
};
};
#size-cells = <0>;
mixer1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- mixer1_out_tcon1: endpoint {
+ mixer1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_mixer1>;
+ };
+
+ mixer1_out_tcon1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&tcon1_in_mixer1>;
};
};
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
+
+ tcon0_in_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mixer1_out_tcon0>;
+ };
};
tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
#size-cells = <0>;
tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
- tcon1_in_mixer1: endpoint {
+ tcon1_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon1>;
+ };
+
+ tcon1_in_mixer1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&mixer1_out_tcon1>;
};
};
sid: eeprom@1c14000 {
compatible = "allwinner,sun8i-a83t-sid";
reg = <0x1c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@34 {
+ reg = <0x34 8>;
+ };
+ };
+
+ crypto: crypto@1c15000 {
+ compatible = "allwinner,sun8i-a83t-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_SS>;
+ clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+ clock-names = "bus", "mod";
+ };
+
+ msgbox: mailbox@1c17000 {
+ compatible = "allwinner,sun8i-a83t-msgbox",
+ "allwinner,sun6i-a31-msgbox";
+ reg = <0x01c17000 0x1000>;
+ clocks = <&ccu CLK_BUS_MSGBOX>;
+ resets = <&ccu RST_BUS_MSGBOX>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
};
usb_otg: usb@1c19000 {
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
+ dr_mode = "otg";
status = "disabled";
};
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ /omit-if-no-ref/
+ csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+ pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+ "PE8", "PE9", "PE10", "PE11",
+ "PE12", "PE13";
+ function = "csi";
+ };
+
+ /omit-if-no-ref/
+ csi_mclk_pin: csi-mclk-pin {
+ pins = "PE1";
+ function = "csi";
+ };
+
emac_rgmii_pins: emac-rgmii-pins {
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD11", "PD12", "PD13", "PD14", "PD18",
function = "i2c1";
};
+ /omit-if-no-ref/
+ i2c2_pe_pins: i2c2-pe-pins {
+ pins = "PE14", "PE15";
+ function = "i2c2";
+ };
+
i2c2_ph_pins: i2c2-ph-pins {
pins = "PH4", "PH5";
function = "i2c2";
pins = "PG8", "PG9";
function = "uart1";
};
+
+ /omit-if-no-ref/
+ uart2_pb_pins: uart2-pb-pins {
+ pins = "PB0", "PB1";
+ function = "uart2";
+ };
};
timer@1c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
+ compatible = "allwinner,sun8i-a23-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ uart2: serial@1c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@1c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@1c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun8i-a83t-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x01c30000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- resets = <&ccu 13>;
- reset-names = "stmmaceth";
- clocks = <&ccu 27>;
+ clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
status = "disabled";
mdio: mdio {
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ csi: camera@1cb0000 {
+ compatible = "allwinner,sun8i-a83t-csi";
+ reg = <0x01cb0000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+ status = "disabled";
+ };
+
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
- phy-names = "hdmi-phy";
+ phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "disabled";
compatible = "allwinner,sun8i-a83t-r-ccu";
reg = <0x01f01400 0x400>;
clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
- <&ccu 6>;
+ <&ccu CLK_PLL_PERIPH>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x1f01c00 0x400>;
};
+ r_cir: ir@1f02000 {
+ compatible = "allwinner,sun8i-a83t-ir",
+ "allwinner,sun6i-a31-ir";
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_APB0_IR>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x400>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_cir_pin>;
+ status = "disabled";
+ };
+
+ r_lradc: lradc@1f03c00 {
+ compatible = "allwinner,sun8i-a83t-r-lradc";
+ reg = <0x01f03c00 0x100>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupt-controller;
#interrupt-cells = <3>;
+ r_cir_pin: r-cir-pin {
+ pins = "PL12";
+ function = "s_cir_rx";
+ };
+
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ths: thermal-sensor@1f04000 {
+ compatible = "allwinner,sun8i-a83t-ths";
+ reg = <0x01f04000 0x100>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu0_hot: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_very_hot: cpu-very-hot {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu0_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1_thermal: cpu1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+
+ trips {
+ cpu1_hot: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_very_hot: cpu-very-hot {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu1_hot>;
+ cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 2>;
+ };
};
};
projects / u-boot.git / blobdiff