config/ast2600: Disable hash hardware accel

[u-boot.git] / configs / ls1046ardb_sdcard_SECURE_BOOT_defconfig

diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index af30b022c80f10fc7c2c9c8b1171ca2e4913663f..6960aa9d3ffdcb0e146826dbf66ee7791db79d78 100644 (file)
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -7,7 +7,6 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
 CONFIG_SYS_I2C_MXC_I2C1=y
 CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
@@ -20,7 +19,14 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
+CONFIG_NXP_ESBC=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
@@ -34,13 +40,23 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x1f000
+CONFIG_SPL_PAD_TO=0x21000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x8f000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_FSL_PBL=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x10020000
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
@@ -68,6 +84,7 @@ CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 # CONFIG_SPL_DM_I2C is not set
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_FSL_ESDHC=y