Convert CONFIG_SYS_MONITOR_LEN to Kconfig

[u-boot.git] / configs / pcm058_defconfig

diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig
index 3f14326e46bfa39c417de9cd75c70e0d1170ce3c..65ddeb2dbe2c91e64bfc2115fe42b391f5662720 100644 (file)
--- a/configs/pcm058_defconfig
+++ b/configs/pcm058_defconfig
@@ -1,14 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_LEN=0x800000
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x31400
 CONFIG_MX6Q=y
 CONFIG_MX6_OCRAM_256KB=y
 CONFIG_TARGET_PCM058=y
@@ -16,29 +16,33 @@ CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-phytec-mira-rdk-nand"
 CONFIG_SPL_TEXT_BASE=0x00908000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x110000
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI=y
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_MONITOR_LEN=409600
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="run mmcboot;run nandboot"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x18a
 CONFIG_SPL_DMA=y
 CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x31400
+CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_SYS_MAXARGS=32
+CONFIG_SYS_PBSIZE=532
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
@@ -68,14 +72,13 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_MXS=y
 CONFIG_NAND_MXS_DT=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y