Summary
=======
-This README is about U-Boot support for TI's ARM 926EJS based family of SoCs.
-These SOCs are used for cameras, video security and surveillance, DVR's, etc.
-DaVinci SOC's comprise of DM644x, DM646x, DM35x and DM36x series of SOC's
-Additionally there are some SOCs meant for the audio market which though have
-an OMAP part number are very similar to the DaVinci series of SOC's
-Additionally, some family members contain a TI DSP and/or graphics
-co processors along with a host of other peripherals.
+Note: this document used to be about the entire family of DaVinci SOCs but the
+support for the DM* family and DA830 has since been dropped.
-Currently the following boards are supported:
-
-* TI DaVinci DM644x EVM
-
-* TI DaVinci DM646x EVM
-
-* TI DaVinci DM355 EVM
-
-* TI DaVinci DM365 EVM
+This README is about U-Boot support for TI's DA850 SoC. This SOC has an OMAP
+part number but is very similar to the DaVinci series.
-* TI DA830 EVM
+Currently the following boards are supported:
* TI DA850 EVM
-* DM355 based Leopard board
-
-* DM644x based schmoogie board
-
-* DM644x based sffsdr board
+* TI OMAP-L138 LCDK
-* DM644x based sonata board
+* Lego EV3
Build
=====
-* TI DaVinci DM644x EVM:
-
-make davinci_dvevm_config
-make
-
-* TI DaVinci DM646x EVM:
-
-make davinci_dm6467evm_config
-make
-
-* TI DaVinci DM355 EVM:
-
-make davinci_dm355evm_config
-make
-
-* TI DaVinci DM365 EVM:
-
-make davinci_dm365evm_config
-make
-
-* TI DA830 EVM:
-
-make da830evm_config
-make
-
* TI DA850 EVM:
make da850evm_config
make
-* DM355 based Leopard board:
-
-make davinci_dm355leopard_config
-make
-
-* DM644x based schmoogie board:
+* TI OMAP-L138 LCDK
-make davinci_schmoogie_config
+make omapl138_lcdk_defconfig
make
-* DM644x based sffsdr board:
+* Lego EV3
-make davinci_sffsdr_config
-make
-
-* DM644x based sonata board:
-
-make davinci_sonata_config
+make legoev3_defconfig
make
Bootloaders
===============
-The DaVinci SOC's use 2 bootloaders. The low level initialization
-is done by a UBL(user boot loader). The UBL is written to a NAND/NOR/SPI flash
-by a programmer. During initial bootup, the ROM Bootloader reads the UBL
-from a storage device and loads it into the IRAM. The UBL then loads the U-Boot
-into the RAM.
-The programmers and UBL are always released as part of any standard TI
-software release associated with an SOC.
+For DA850 an SPL (secondary program loader, see doc/README.SPL) is provided
+to load U-Boot from SPI flash, MMC or NAND. The SPL takes care of the low level
+initialization.
+
+The SPL is built as u-boot.ais for all DA850 defconfigs except those booting
+from NOR flash. The resulting image file can be programmed to the SPI flash
+of the DA850 EVM/LCDK.
+
+Devices that support booting from NOR utilize execute in place (XIP) and do
+not require SPL to perform low level initialization.
Environment Variables
=====================
device specific datasheet before setting up this variable. This information is
passed to the Linux kernel using the ATAG_REVISION atag.
-If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK
+If "maxcpuclk" is not defined, the configuration CFG_DA850_EVM_MAX_CPU_CLK
is used to obtain this information.
Links
=====
-1) TI DaVinci DM355 EVM:
-http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
-http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=203&osCsid=c499af6087317f11b3da19b4e8f1af32
-
-2) TI DaVinci DM365 EVM:
-http://focus.ti.com/docs/prod/folders/print/tms320dm365.html?247SEM=
-http://support.spectrumdigital.com/boards/evmdm365/revc/
-
-3) DaVinci DM355 based leopard board
-http://designsomething.org/leopardboard/default.aspx
-http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=192&osCsid=67c20335668ffc57cb35727106eb24b1
-
-4) TI DaVinci DM6467 EVM:
-http://focus.ti.com/docs/prod/folders/print/tms320dm6467.html
-http://support.spectrumdigital.com/boards/evmdm6467/revf/
+1) TI DA850 EVM
+http://focus.ti.com/docs/prod/folders/print/omap-l138.html
+http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
-5) TI DaVinci DM6446 EVM:
-http://focus.ti.com/docs/prod/folders/print/tms320dm6446.html
-http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=222
+2) TI OMAP-L138 LCDK
+http://focus.ti.com/docs/prod/folders/print/omap-l138.html
+https://www.ti.com/tool/TMDXLCDK138
-6) TI DA830 EVM
-http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385
-http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214
+Davinci special defines
+=======================
-7) TI DA850 EVM
-http://focus.ti.com/docs/prod/folders/print/omap-l138.html
-http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
+CFG_SYS_DV_NOR_BOOT_CFG: AM18xx based boards, booting in NOR Boot mode
+ need a "NOR Boot Configuration Word" stored
+ in the NOR Flash. This define adds this.
+ More Info about this, see:
+ spraba5a.pdf chapter 3.1
projects / u-boot.git / blobdiff