Convert CONFIG_SYS_MALLOC_LEN to Kconfig

[u-boot.git] / configs / ap121_defconfig

diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
index c9dbe4d72174f31873710aa99ca21a917bc595c2..9549bc385289e6f5742d0d6b2f970967e35b1f81 100644 (file)
--- a/configs/ap121_defconfig
+++ b/configs/ap121_defconfig
@@ -1,11 +1,19 @@
 CONFIG_MIPS=y
 CONFIG_SYS_TEXT_BASE=0x9F000000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_MEMTEST_START=0x80100000
+CONFIG_SYS_MEMTEST_END=0x83f00000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x40000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_MALLOC_LEN=0x40000
+CONFIG_DEFAULT_DEVICE_TREE="ap121"
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xb8020000
 CONFIG_DEBUG_UART_CLOCK=25000000
 CONFIG_ARCH_ATH79=y
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
@@ -22,7 +30,6 @@ CONFIG_SYS_PROMPT="ap121 # "
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
@@ -30,11 +37,13 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6144k(rootfs),1600k(uImage),64k(NVRAM),64k(ART)"
 # CONFIG_ISO_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="ap121"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=25000000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
@@ -51,7 +60,6 @@ CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
 CONFIG_PINCTRL_AR933X=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_AR933X=y
 CONFIG_AR933X_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y