board: rockchip: Add rk3588 evb

[u-boot.git] / configs / udoo_neo_defconfig

diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index 2f549b35759be7e91e0d458ae357e04a8bb4dc99..2016471e8f6992edfdc17c18f6edb137c98c11ba 100644 (file)
--- a/configs/udoo_neo_defconfig
+++ b/configs/udoo_neo_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_TEXT_BASE=0x87800000
+CONFIG_SYS_MALLOC_LEN=0x300000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
@@ -9,8 +10,6 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_MX6SX=y
 CONFIG_TARGET_UDOO_NEO=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_MALLOC_LEN=0x300000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6sx-udoo-neo-basic"
 CONFIG_SPL_TEXT_BASE=0x00908000
@@ -19,15 +18,20 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_CMD_BMODE is not set
+CONFIG_SYS_MONITOR_LEN=409600
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
-CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_MAXARGS=32
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_PINMUX is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -35,22 +39,27 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_BOUNCE_BUFFER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
-CONFIG_POWER_LEGACY=y
-CONFIG_POWER_I2C=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_ANATOP=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_IMX_THERMAL=y
+CONFIG_USB=y