mips: octeon: octeon_ebb7304: Add DDR4 support

[u-boot.git] / configs / apalis_t30_defconfig

diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig
index 31a763536d372b962df448c133149f30b6738fa1..85f9ce9793b4117e93c35cf071365ad9e557874a 100644 (file)
--- a/configs/apalis_t30_defconfig
+++ b/configs/apalis_t30_defconfig
@@ -1,20 +1,22 @@
 CONFIG_ARM=y
 CONFIG_ARM=y

-CONFIG_TEGRA=y
+CONFIG_ARCH_TEGRA=y

 CONFIG_SYS_TEXT_BASE=0x80110000
 CONFIG_SYS_TEXT_BASE=0x80110000

+CONFIG_SYS_MALLOC_F_LEN=0x2000

 CONFIG_NR_DRAM_BANKS=2
 CONFIG_NR_DRAM_BANKS=2

+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xFFFFDE00
+CONFIG_SPL_TEXT_BASE=0x80108000

 CONFIG_TEGRA30=y
 CONFIG_TARGET_APALIS_T30=y
 CONFIG_TEGRA30=y
 CONFIG_TARGET_APALIS_T30=y

+CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis"

 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_ARCH_MISC_INIT=y

-CONFIG_SPL_TEXT_BASE=0x80108000

 CONFIG_SYS_PROMPT="Apalis T30 # "
 # CONFIG_CMD_IMI is not set
 CONFIG_SYS_PROMPT="Apalis T30 # "
 # CONFIG_CMD_IMI is not set

-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set

 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y


@@ -26,10 +28,12 @@ CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_LIVE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_LIVE=y

-CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_BLOCKSIZE=16352

 CONFIG_SPL_DM=y
 CONFIG_SPL_DM=y

-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y

 CONFIG_SYS_I2C_TEGRA=y
 CONFIG_E1000=y
 CONFIG_PCI=y
 CONFIG_SYS_I2C_TEGRA=y
 CONFIG_E1000=y
 CONFIG_PCI=y