+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP Semiconductor
*
* calculate the organization and timing parameter
* from ddr3 spd, please refer to the spec
#include <common.h>
#include <fsl_ddr_sdram.h>
+#include <log.h>
+#include <linux/bug.h>
#include <fsl_ddr.h>
if ((spd->organization & 0x7) < 4)
nbit_sdram_width = (spd->organization & 0x7) + 2;
package_3ds = (spd->package_type & 0x3) == 0x2;
+ if ((spd->package_type & 0x80) && !package_3ds) { /* other than 3DS */
+ printf("Warning: not supported SDRAM package type\n");
+ return 0;
+ }
if (package_3ds)
die_count = (spd->package_type >> 4) & 0x7;
nbit_primary_bus_width - nbit_sdram_width +
die_count);
- debug("DDR: DDR III rank density = 0x%16llx\n", bsize);
+ debug("DDR: DDR rank density = 0x%16llx\n", bsize);
return bsize;
}
* Writes the results to the dimm_params_t structure pointed by pdimm.
*
*/
-unsigned int
-ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
+unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num,
+ const generic_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
{
unsigned int retval;
int i;
+ const u8 udimm_rc_e_dq[18] = {
+ 0x0c, 0x2c, 0x15, 0x35, 0x15, 0x35, 0x0b, 0x2c, 0x15,
+ 0x35, 0x0b, 0x35, 0x0b, 0x2c, 0x0b, 0x35, 0x15, 0x36
+ };
+ int spd_error = 0;
+ u8 *ptr;
+ u8 val;
if (spd->mem_type) {
if (spd->mem_type != SPD_MEMTYPE_DDR4) {
- printf("DIMM %u: is not a DDR4 SPD.\n", dimm_number);
+ printf("Ctrl %u DIMM %u: is not a DDR4 SPD.\n",
+ ctrl_num, dimm_number);
return 1;
}
} else {
pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1;
pdimm->rank_density = compute_ranksize(spd);
pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
+ pdimm->die_density = spd->density_banks & 0xf;
pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7));
if ((spd->bus_width >> 3) & 0x3)
pdimm->ec_sdram_width = 8;
pdimm->data_width = pdimm->primary_sdram_width
+ pdimm->ec_sdram_width;
pdimm->device_width = 1 << ((spd->organization & 0x7) + 2);
+ pdimm->package_3ds = (spd->package_type & 0x3) == 0x2 ?
+ (spd->package_type >> 4) & 0x7 : 0;
/* These are the types defined by the JEDEC SPD spec */
pdimm->mirrored_dimm = 0;
case DDR4_SPD_MODULETYPE_RDIMM:
/* Registered/buffered DIMMs */
pdimm->registered_dimm = 1;
+ if (spd->mod_section.registered.reg_map & 0x1)
+ pdimm->mirrored_dimm = 1;
+ val = spd->mod_section.registered.ca_stren;
+ pdimm->rcw[3] = val >> 4;
+ pdimm->rcw[4] = ((val & 0x3) << 2) | ((val & 0xc) >> 2);
+ val = spd->mod_section.registered.clk_stren;
+ pdimm->rcw[5] = ((val & 0x3) << 2) | ((val & 0xc) >> 2);
+ /* Not all in SPD. For convience only. Boards may overwrite. */
+ pdimm->rcw[6] = 0xf;
+ /*
+ * A17 only used for 16Gb and above devices.
+ * C[2:0] only used for 3DS.
+ */
+ pdimm->rcw[8] = pdimm->die_density >= 0x6 ? 0x0 : 0x8 |
+ (pdimm->package_3ds > 0x3 ? 0x0 :
+ (pdimm->package_3ds > 0x1 ? 0x1 :
+ (pdimm->package_3ds > 0 ? 0x2 : 0x3)));
+ if (pdimm->package_3ds || pdimm->n_ranks != 4)
+ pdimm->rcw[13] = 0xc;
+ else
+ pdimm->rcw[13] = 0xd; /* Fix encoded by board */
+
break;
case DDR4_SPD_MODULETYPE_UDIMM:
/* Unbuffered DIMMs */
if (spd->mod_section.unbuffered.addr_mapping & 0x1)
pdimm->mirrored_dimm = 1;
+ if ((spd->mod_section.unbuffered.mod_height & 0xe0) == 0 &&
+ (spd->mod_section.unbuffered.ref_raw_card == 0x04)) {
+ /* Fix SPD error found on DIMMs with raw card E0 */
+ for (i = 0; i < 18; i++) {
+ if (spd->mapping[i] == udimm_rc_e_dq[i])
+ continue;
+ spd_error = 1;
+ debug("SPD byte %d: 0x%x, should be 0x%x\n",
+ 60 + i, spd->mapping[i],
+ udimm_rc_e_dq[i]);
+ ptr = (u8 *)&spd->mapping[i];
+ *ptr = udimm_rc_e_dq[i];
+ }
+ if (spd_error)
+ puts("SPD DQ mapping error fixed\n");
+ }
break;
default:
/* SDRAM device parameters */
pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12;
pdimm->n_col_addr = (spd->addressing & 0x7) + 9;
- pdimm->bank_addr_bits = (spd->density_banks >> 4) & 0x3;
+ pdimm->bank_addr_bits = ((spd->density_banks >> 4) & 0x3) + 2;
pdimm->bank_group_bits = (spd->density_banks >> 6) & 0x3;
/*
* BL8 -bit3, BC4 -bit2
*/
pdimm->burst_lengths_bitmask = 0x0c;
- pdimm->row_density = __ilog2(pdimm->rank_density);
/* MTB - medium timebase
* The MTB in the SPD spec is 125ps,
/* min CAS to CAS Delay Time (tCCD_Lmin), same bank group */
pdimm->tccdl_ps = spd_to_ps(spd->tccdl_min, spd->fine_tccdl_min);
+ if (pdimm->package_3ds) {
+ if (pdimm->die_density <= 0x4) {
+ pdimm->trfc_slr_ps = 260000;
+ } else if (pdimm->die_density <= 0x5) {
+ pdimm->trfc_slr_ps = 350000;
+ } else {
+ printf("WARN: Unsupported logical rank density 0x%x\n",
+ pdimm->die_density);
+ }
+ }
+
/*
* Average periodic refresh interval
* tREFI = 7.8 us at normal temperature range
projects / u-boot.git / blobdiff