Add GPL-2.0+ SPDX-License-Identifier to source files

[u-boot.git] / include / configs / TQM885D.h

diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 0fc4b69acf3dc5f54c55a6f582bb9130d51db05f..e6b1e35d5413c0b24fcc5e06d6f79cf5b0e1ab01 100644 (file)
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -5,23 +5,7 @@
  * (C) Copyright 2006
  * Martin Krause, TQ-Systems GmBH, [email protected]
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 /*
@@ -39,6 +23,8 @@
 #define CONFIG_MPC885          1       /* This is a MPC885 CPU         */
 #define CONFIG_TQM885D         1       /* ...on a TQM88D module        */
 
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
+
 #define CONFIG_8xx_OSCLK               10000000        /*  10 MHz - PLL input clock    */
 #define CONFIG_SYS_8xx_CPUCLK_MIN              15000000        /*  15 MHz - CPU minimum clock  */
 #define CONFIG_SYS_8xx_CPUCLK_MAX              133000000       /* 133 MHz - CPU maximum clock  */
@@ -174,9 +160,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
@@ -196,8 +179,6 @@
 
 #define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Enable loopw command.
  */
@@ -217,9 +198,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -345,6 +325,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD  1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
@@ -481,14 +462,6 @@
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Network configuration
  */
@@ -506,7 +479,7 @@
                                           switching to another netwok (if the
                                           tried network is unreachable) */
 
-#define CONFIG_ETHPRIME                "SCC ETHERNET"
+#define CONFIG_ETHPRIME                "SCC"
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1