rockchip: rk356x-generic: Add support for USB OTG

[u-boot.git] / configs / ls1028aqds_tfa_lpuart_defconfig

diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index 8cd90863a1cf19913a6ebb4f797c773cf29e25d8..b8a8e4c3fb5ee2fc254106cb482a3f1c7d62b1d2 100644 (file)
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -12,27 +12,28 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds-lpuart"
 CONFIG_FSPI_AHB_EN_4BYTE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_ENV_ADDR=0x20500000
+CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_SYS_FSL_NUM_CC_PLLS=3
 CONFIG_FSL_QIXIS=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
-CONFIG_DISTRO_DEFAULTS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M"
+CONFIG_SYS_PBSIZE=532
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMTEST=y
@@ -83,13 +84,11 @@ CONFIG_E1000=y
 CONFIG_FSL_ENETC=y
 CONFIG_MDIO_MUX_I2CREG=y
 CONFIG_NVME_PCI=y
-CONFIG_PCI=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
@@ -103,5 +102,4 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
-CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y