]> Git Repo - u-boot.git/blobdiff - configs/phycore_am62x_a53_defconfig
Merge patch series "Fixes to allow 'ut bootm' to pass when run interactively"
[u-boot.git] / configs / phycore_am62x_a53_defconfig
index d8b129f7dd081f966c414c602f3bd241c535d140..dfff58670a0905b570f083b802f0b281d0019f36 100644 (file)
@@ -12,7 +12,7 @@ CONFIG_TARGET_PHYCORE_AM62X_A53=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
 CONFIG_SF_DEFAULT_SPEED=25000000
-CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x680000
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-phyboard-lyra-rdk"
@@ -26,6 +26,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80c80000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SPL_SIZE_LIMIT=0x40000
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
 CONFIG_ENV_OFFSET_REDUND=0x6c0000
@@ -38,9 +39,8 @@ CONFIG_SPL_SPI=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_BOOTSTD_FULL=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run mmcboot; bootflow scan -lb"
+CONFIG_BOOTCOMMAND="run ${boot}boot; bootflow scan -lb"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x58000
@@ -48,7 +48,6 @@ CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
@@ -56,7 +55,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
@@ -93,7 +91,7 @@ CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
-CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
 CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
@@ -152,7 +150,7 @@ CONFIG_SPL_USB_DWC3_AM62=y
 CONFIG_USB_DWC3_AM62=y
 CONFIG_USB_GADGET=y
 CONFIG_SPL_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Phytec"
+CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
 CONFIG_USB_GADGET_DOWNLOAD=y
This page took 0.025364 seconds and 4 git commands to generate.