Convert CONFIG_SYS_MONITOR_LEN to Kconfig

[u-boot.git] / include / configs / r2dplus.h

diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index e10de1b92079ef8a2d3773b1e3fb8aa5efe505ca..ac39e11a99e11d1f0371253ba2c6aaf28a127e04 100644 (file)
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -1,82 +1,26 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_CPU_SH7751      1
 #define __LITTLE_ENDIAN__      1
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* SCIF */
-#define CONFIG_CONS_SCIF1      1
-
-#define CONFIG_ENV_OVERWRITE   1
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE          0x8C000000
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
-#define CONFIG_SYS_PBSIZE              256
-
-#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - 0x100000)
-
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
 /* Address of u-boot image in Flash */
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)
 #define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
 
 /*
  * NOR Flash ( Spantion S29GL256P )
  */
 #define CONFIG_SYS_FLASH_BASE          (0xA0000000)
-#define CONFIG_SYS_MAX_FLASH_BANKS (1)
-#define CONFIG_SYS_MAX_FLASH_SECT  256
 #define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
 
-#define CONFIG_ENV_SECT_SIZE   0x40000
-#define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
 /*
  * SuperH Clock setting
  */
-#define CONFIG_SYS_CLK_FREQ    60000000
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define        CONFIG_SYS_PLL_SETTLING_TIME    100/* in us */
 
-/*
- * IDE support
- */
-#define CONFIG_IDE_RESET       1
-#define CONFIG_SYS_PIO_MODE            1
-#define CONFIG_SYS_IDE_MAXBUS          1 /* IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE       1
-#define CONFIG_SYS_ATA_BASE_ADDR       0xb4000000
-#define CONFIG_SYS_ATA_STRIDE          2 /* 1bit shift */
-#define CONFIG_SYS_ATA_DATA_OFFSET     0x1000  /* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET      0x1000  /* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET      0x800   /* alternate register offset */
-#define CONFIG_IDE_SWAP_IO
-
-/*
- * SuperH PCI Bridge Configration
- */
-#define CONFIG_SH4_PCI
-#define CONFIG_SH7751_PCI
-#define CONFIG_PCI_SCAN_SHOW   1
-#define __mem_pci
-
-#define CONFIG_PCI_MEM_BUS     0xFD000000      /* Memory space base addr */
-#define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE    0x01000000      /* Size of Memory window */
-#define CONFIG_PCI_IO_BUS      0xFE240000      /* IO space base address */
-#define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE     0x00040000      /* Size of IO window */
-#define CONFIG_PCI_SYS_BUS     CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_PHYS    CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_SIZE    CONFIG_SYS_SDRAM_SIZE
-
 #endif /* __CONFIG_H */