Merge patch series "Fixes to allow 'ut bootm' to pass when run interactively"

[u-boot.git] / configs / at91sam9g20ek_dataflash_cs1_defconfig

diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig
index 5ad7c4cbe2490455ad62c10e06c6735d424a9e1e..878c04ca9f1080f2cf4cfeaadd0638ecf80de88a 100644 (file)
--- a/configs/at91sam9g20ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig
@@ -2,27 +2,29 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x21f00000
+CONFIG_TEXT_BASE=0x21f00000
 CONFIG_SYS_MALLOC_LEN=0x2d000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_AT91SAM9260EK=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_AT91SAM9260EK=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x4200
 CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek"
-CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0:1; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
@@ -40,7 +42,6 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_ENV_SPI_MAX_HZ=15000000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
@@ -51,7 +52,6 @@ CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
-CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
@@ -63,3 +63,5 @@ CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
+CONFIG_SYS_USB_OHCI_SLOT_NAME="at91sam9260"
+CONFIG_USB_ATMEL=y