common: Drop asm/global_data.h from common header

[u-boot.git] / board / freescale / lx2160a / lx2160a.c

diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 0ff987eeb4e2831f130f8a84e5a3222ca4b9e097..1d203ec6da0ff26c7a73f0b49ae71e2c646814d2 100644 (file)
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -7,6 +7,7 @@
 #include <clock_legacy.h>
 #include <dm.h>
 #include <init.h>
+#include <asm/global_data.h>
 #include <dm/platform_data/serial_pl01x.h>
 #include <i2c.h>
 #include <malloc.h>
@@ -32,12 +33,13 @@
 #include "../common/vid.h"
 #include <fsl_immap.h>
 #include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include "lx2160a.h"
 
 #ifdef CONFIG_EMC2305
 #include "../common/emc2305.h"
 #endif
 
-#ifdef CONFIG_TARGET_LX2160AQDS
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
 #define CFG_MUX_I2C_SDHC(reg, value)           ((reg & 0x3f) | value)
 #define SET_CFG_MUX1_SDHC1_SDHC(reg)           (reg & 0x3f)
 #define SET_CFG_MUX2_SDHC1_SPI(reg, value)     ((reg & 0xcf) | value)
@@ -47,11 +49,11 @@
 #define SDHC1_BASE_PMUX_DSPI                   2
 #define SDHC2_BASE_PMUX_DSPI                   2
 #define IIC5_PMUX_SPI3                         3
-#endif /* CONFIG_TARGET_LX2160AQDS */
+#endif /* CONFIG_TARGET_LX2160AQDS or CONFIG_TARGET_LX2162AQDS */
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct pl01x_serial_platdata serial0 = {
+static struct pl01x_serial_plat serial0 = {
 #if CONFIG_CONS_INDEX == 0
        .base = CONFIG_SYS_SERIAL0,
 #elif CONFIG_CONS_INDEX == 1
@@ -62,19 +64,19 @@ static struct pl01x_serial_platdata serial0 = {
        .type = TYPE_PL011,
 };
 
-U_BOOT_DEVICE(nxp_serial0) = {
+U_BOOT_DRVINFO(nxp_serial0) = {
        .name = "serial_pl01x",
-       .platdata = &serial0,
+       .plat = &serial0,
 };
 
-static struct pl01x_serial_platdata serial1 = {
+static struct pl01x_serial_plat serial1 = {
        .base = CONFIG_SYS_SERIAL1,
        .type = TYPE_PL011,
 };
 
-U_BOOT_DEVICE(nxp_serial1) = {
+U_BOOT_DRVINFO(nxp_serial1) = {
        .name = "serial_pl01x",
-       .platdata = &serial1,
+       .plat = &serial1,
 };
 
 int select_i2c_ch_pca9547(u8 ch)
@@ -191,7 +193,7 @@ int board_fix_fdt(void *fdt)
 }
 #endif
 
-#if defined(CONFIG_TARGET_LX2160AQDS)
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
 void esdhc_dspi_status_fixup(void *blob)
 {
        const char esdhc0_path[] = "/soc/esdhc@2140000";
@@ -259,7 +261,7 @@ void esdhc_dspi_status_fixup(void *blob)
 
 int esdhc_status_fixup(void *blob, const char *compat)
 {
-#if defined(CONFIG_TARGET_LX2160AQDS)
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
        /* Enable esdhc and dspi DT nodes based on RCW fields */
        esdhc_dspi_status_fixup(blob);
 #else
@@ -297,7 +299,7 @@ int checkboard(void)
        enum boot_src src = get_boot_src();
        char buf[64];
        u8 sw;
-#ifdef CONFIG_TARGET_LX2160AQDS
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
        int clock;
        static const char *const freq[] = {"100", "125", "156.25",
                                           "161.13", "322.26", "", "", "",
@@ -306,7 +308,7 @@ int checkboard(void)
 #endif
 
        cpu_name(buf);
-#ifdef CONFIG_TARGET_LX2160AQDS
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
        printf("Board: %s-QDS, ", buf);
 #else
        printf("Board: %s-RDB, ", buf);
@@ -339,7 +341,13 @@ int checkboard(void)
                        break;
                }
        }
-#ifdef CONFIG_TARGET_LX2160AQDS
+#if defined(CONFIG_TARGET_LX2160ARDB)
+       printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
+
+       puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
+       puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
+       puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
+#else
        printf("FPGA: v%d (%s), build %d",
               (int)QIXIS_READ(scver), qixis_read_tag(buf),
               (int)qixis_read_minor());
@@ -350,31 +358,27 @@ int checkboard(void)
        sw = QIXIS_READ(brdcfg[2]);
        clock = sw >> 4;
        printf("Clock1 = %sMHz ", freq[clock]);
+#if defined(CONFIG_TARGET_LX2160AQDS)
        clock = sw & 0x0f;
        printf("Clock2 = %sMHz", freq[clock]);
-
+#endif
        sw = QIXIS_READ(brdcfg[3]);
        puts("\nSERDES2 Reference : ");
        clock = sw >> 4;
        printf("Clock1 = %sMHz ", freq[clock]);
        clock = sw & 0x0f;
-       printf("Clock2 = %sMHz", freq[clock]);
-
+       printf("Clock2 = %sMHz\n", freq[clock]);
+#if defined(CONFIG_TARGET_LX2160AQDS)
        sw = QIXIS_READ(brdcfg[12]);
-       puts("\nSERDES3 Reference : ");
+       puts("SERDES3 Reference : ");
        clock = sw >> 4;
        printf("Clock1 = %sMHz Clock2 = %sMHz\n", freq[clock], freq[clock]);
-#else
-       printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
-
-       puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
-       puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
-       puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
+#endif
 #endif
        return 0;
 }
 
-#ifdef CONFIG_TARGET_LX2160AQDS
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
 /*
  * implementation of CONFIG_ESDHC_DETECT_QUIRK Macro.
  */
@@ -562,7 +566,7 @@ int config_board_mux(void)
 
 unsigned long get_board_sys_clk(void)
 {
-#ifdef CONFIG_TARGET_LX2160AQDS
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
        u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
 
        switch (sysclk_conf & 0x03) {
@@ -581,7 +585,7 @@ unsigned long get_board_sys_clk(void)
 
 unsigned long get_board_ddr_clk(void)
 {
-#ifdef CONFIG_TARGET_LX2160AQDS
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
        u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
 
        switch ((ddrclk_conf & 0x30) >> 4) {