xilinx: versal: Setup 30MHz as default spi frequency

[u-boot.git] / configs / MCR3000_defconfig

diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig
index d8d6417d21e697560a9fa92108a1f312c552b11f..2061eda9474e3d3bebba1d4740a94dbed8c2e871 100644 (file)
--- a/configs/MCR3000_defconfig
+++ b/configs/MCR3000_defconfig
@@ -3,15 +3,15 @@ CONFIG_TEXT_BASE=0x4000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="mcr3000"
-CONFIG_SYS_PROMPT="S3K> "
+CONFIG_SYS_MONITOR_LEN=327680
+CONFIG_SYS_CLK_FREQ=132000000
 CONFIG_SYS_LOAD_ADDR=0x200000
 CONFIG_ENV_ADDR=0x4004000
 CONFIG_MPC8xx=y
+# CONFIG_PCI is not set
 CONFIG_TARGET_MCR3000=y
-CONFIG_8xx_GCLK_FREQ=132000000
 CONFIG_CMD_IMMAP=y
 CONFIG_SYS_SIUMCR=0x00600400
-CONFIG_SYS_SYPCR=0xFFFFFF8F
 CONFIG_SYS_TBSCR=0x00C3
 CONFIG_SYS_PISCR=0x0000
 CONFIG_SYS_PLPRCR_BOOL=y
@@ -19,28 +19,32 @@ CONFIG_SYS_PLPRCR=0x00460004
 CONFIG_SYS_SCCR=0x00C20000
 CONFIG_SYS_SCCR_MASK=0x60000000
 CONFIG_SYS_DER=0x2002000F
-CONFIG_SYS_MONITOR_LEN=327680
-CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_MONITOR_BASE=0x04000000
+CONFIG_FIT=y
 CONFIG_BOOTDELAY=5
 CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_FLUSH_STDIN=y
 CONFIG_AUTOBOOT_PROMPT="\nEnter password - autoboot in %d sec...\n"
-CONFIG_AUTOBOOT_DELAY_STR="root"
+CONFIG_AUTOBOOT_ENCRYPTION=y
+CONFIG_AUTOBOOT_STOP_STR_ENABLE=y
+CONFIG_AUTOBOOT_STOP_STR_SHA256="4813494d137e1631bba301d5acab6e7bb7aa74ce1185d456565ef51d737677b2"
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run flashboot"
-CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_HWCONFIG is not set
 CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PROMPT="S3K> "
 CONFIG_SYS_PBSIZE=278
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_CONSOLE is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND=y
 # CONFIG_CMD_ECHO is not set
 # CONFIG_CMD_ITEST is not set
@@ -51,10 +55,18 @@ CONFIG_CMD_MII=y
 CONFIG_MII_INIT=y
 CONFIG_CMD_PING=y
 # CONFIG_CMD_SLEEP is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.0.3"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.0.1"
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0x4000801
 CONFIG_SYS_OR0_PRELIM=0xFFC00926
@@ -81,14 +93,15 @@ CONFIG_SYS_BR7_PRELIM=0x1C000001
 CONFIG_SYS_OR7_PRELIM=0xFFFF810A
 # CONFIG_MMC is not set
 CONFIG_MTD=y
+CONFIG_DM_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_FLASH_SHOW_PROGRESS=0
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_SYS_MAX_FLASH_SECT=35
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MPC8XX_FEC=y
-# CONFIG_PCI is not set
 CONFIG_DM_SERIAL=y
 CONFIG_WDT=y
-CONFIG_SHA256=y
+CONFIG_WDT_MPC8xxx_BME=y
 CONFIG_LZMA=y