configs: Resync with savedefconfig

[u-boot.git] / configs / ls1046ardb_sdcard_defconfig

diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index ac8f2bcb1bb3221c84217c61af96993fdae33c77..3a41d8a22b61ba60398cd98bf18026c8e563fb20 100644 (file)
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -1,10 +1,13 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1046ARDB=y
-CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_LEN=0x102000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_SYS_I2C_MXC_I2C1=y
@@ -18,28 +21,47 @@ CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x10020000
 CONFIG_SPL=y
+CONFIG_PCI=y
 CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_REMAKE_ELF=y
+CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg"
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x1f000
+CONFIG_SPL_PAD_TO=0x21000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x8f000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
@@ -50,14 +72,15 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC3"
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
@@ -77,20 +100,18 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_FIXED=y
-CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_SYS_FMAN_FW_ADDR=0x900000
-CONFIG_NVME=y
-CONFIG_PCI=y
+CONFIG_NVME_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_PCIE_LAYERSCAPE_EP=y
 CONFIG_POWER_LEGACY=y
 CONFIG_POWER_I2C=y
 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
 CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y