Git Repo - u-boot.git/blame_incremental

... / ...

Commit	Line	Data
	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* siemens pxm2
	4	* (C) Copyright 2013 Siemens Schweiz AG
	5	* (C) Heiko Schocher, DENX Software Engineering, [email protected].
	6	*
	7	* Based on:
	8	* U-Boot file:/include/configs/am335x_evm.h
	9	*
	10	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	11	*/
	12
	13	#ifndef __CONFIG_PXM2_H
	14	#define __CONFIG_PXM2_H
	15
	16	#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
	17
	18	#include "siemens-am33x-common.h"
	19
	20	#define DDR_IOCTRL_VAL 0x18b
	21	#define DDR_PLL_FREQ 266
	22
	23	#define BOARD_DFU_BUTTON_GPIO 59
	24	#define BOARD_LCD_POWER 111
	25	#define BOARD_BACK_LIGHT 112
	26	#define BOARD_TOUCH_POWER 57
	27
	28	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	29	"button_dfu0=59\0" \
	30	"led0=117,0,1\0" \
	31
	32	/* Physical Memory Map */
	33	#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
	34
	35	/* I2C Configuration */
	36	#define CONFIG_SYS_I2C_SPEED 400000
	37	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	38
	39	#define CONFIG_PHY_ATHEROS
	40
	41	#define CONFIG_FACTORYSET
	42
	43	#ifndef CONFIG_SPL_BUILD
	44
	45	/* Use common default */
	46
	47	/* Default env settings */
	48	#define CONFIG_EXTRA_ENV_SETTINGS \
	49	"hostname=pxm2\0" \
	50	"ubi_off=2048\0"\
	51	"nand_img_size=0x500000\0" \
	52	"optargs=\0" \
	53	"preboot=draco_led 0\0" \
	54	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	55	"splashpos=m,m\0" \
	56	CONFIG_ENV_SETTINGS_V1 \
	57	CONFIG_ENV_SETTINGS_NAND_V1 \
	58	"mmc_dev=0\0" \
	59	"mmc_root=/dev/mmcblk0p2 rw\0" \
	60	"mmc_root_fs_type=ext4 rootwait\0" \
	61	"mmc_load_uimage=" \
	62	"mmc rescan; " \
	63	"setenv bootfile uImage;" \
	64	"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	65	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	66	"importbootenv=echo Importing environment from mmc ...; " \
	67	"env import -t $loadaddr $filesize\0" \
	68	"mmc_args=run bootargs_defaults;" \
	69	"mtdparts default;" \
	70	"setenv bootargs ${bootargs} " \
	71	"root=${mmc_root} ${mtdparts}" \
	72	"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
	73	"eth=${ethaddr} " \
	74	"\0" \
	75	"mmc_boot=run mmc_args; " \
	76	"run mmc_load_uimage; " \
	77	"bootm ${kloadaddr}\0" \
	78	""
	79
	80	#ifndef CONFIG_RESTORE_FLASH
	81	/* set to negative value for no autoboot */
	82
	83	#define CONFIG_BOOTCOMMAND \
	84	"if dfubutton; then " \
	85	"run dfu_start; " \
	86	"reset; " \
	87	"fi; " \
	88	"if mmc rescan; then " \
	89	"echo SD/MMC found on device ${mmc_dev};" \
	90	"if run loadbootenv; then " \
	91	"echo Loaded environment from ${bootenv};" \
	92	"run importbootenv;" \
	93	"fi;" \
	94	"if test -n $uenvcmd; then " \
	95	"echo Running uenvcmd ...;" \
	96	"run uenvcmd;" \
	97	"fi;" \
	98	"if run mmc_load_uimage; then " \
	99	"run mmc_args;" \
	100	"bootm ${kloadaddr};" \
	101	"fi;" \
	102	"fi;" \
	103	"run nand_boot;" \
	104	"reset;"
	105
	106	#else
	107
	108	#define CONFIG_BOOTCOMMAND \
	109	"setenv autoload no; " \
	110	"dhcp; " \
	111	"if tftp 80000000 debrick.scr; then " \
	112	"source 80000000; " \
	113	"fi"
	114	#endif
	115	#endif /* CONFIG_SPL_BUILD */
	116
	117	#if defined(CONFIG_VIDEO)
	118	#define CONFIG_VIDEO_DA8XX
	119	#define CONFIG_SPLASH_SCREEN
	120	#define CONFIG_SPLASH_SCREEN_ALIGN
	121	#define CONFIG_VIDEO_LOGO
	122	#define CONFIG_VIDEO_BMP_RLE8
	123	#define CONFIG_VIDEO_BMP_LOGO
	124	#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
	125	#define PWM_TICKS 0x1388
	126	#define PWM_DUTY 0x200
	127	#endif
	128
	129	#endif /* ! __CONFIG_PXM2_H */