| | 1 | #!/bin/bash |
| | 2 | # Tool mainly for U-Boot Quality Assurance: build one or more board |
| | 3 | # configurations with minimal verbosity, showing only warnings and |
| | 4 | # errors. |
| | 5 | |
| | 6 | usage() |
| | 7 | { |
| | 8 | # if exiting with 0, write to stdout, else write to stderr |
| | 9 | local ret=${1:-0} |
| | 10 | [ "${ret}" -eq 1 ] && exec 1>&2 |
| | 11 | cat <<-EOF |
| | 12 | Usage: MAKEALL [options] [--] [boards-to-build] |
| | 13 | |
| | 14 | Options: |
| | 15 | -a ARCH, --arch ARCH Build all boards with arch ARCH |
| | 16 | -c CPU, --cpu CPU Build all boards with cpu CPU |
| | 17 | -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR |
| | 18 | -s SOC, --soc SOC Build all boards with soc SOC |
| | 19 | -l, --list List all targets to be built |
| | 20 | -m, --maintainers List all targets and maintainer email |
| | 21 | -M, --mails List all targets and all affilated emails |
| | 22 | -h, --help This help output |
| | 23 | |
| | 24 | Selections by these options are logically ANDed; if the same option |
| | 25 | is used repeatedly, such selections are ORed. So "-v FOO -v BAR" |
| | 26 | will select all configurations where the vendor is either FOO or |
| | 27 | BAR. Any additional arguments specified on the command line are |
| | 28 | always build additionally. See the boards.cfg file for more info. |
| | 29 | |
| | 30 | If no boards are specified, then the default is "powerpc". |
| | 31 | |
| | 32 | Environment variables: |
| | 33 | BUILD_NCPUS number of parallel make jobs (default: auto) |
| | 34 | CROSS_COMPILE cross-compiler toolchain prefix (default: "") |
| | 35 | MAKEALL_LOGDIR output all logs to here (default: ./LOG/) |
| | 36 | BUILD_DIR output build directory (default: ./) |
| | 37 | BUILD_NBUILDS number of parallel targets (default: 1) |
| | 38 | |
| | 39 | Examples: |
| | 40 | - build all Power Architecture boards: |
| | 41 | MAKEALL -a powerpc |
| | 42 | MAKEALL --arch powerpc |
| | 43 | MAKEALL powerpc |
| | 44 | - build all PowerPC boards manufactured by vendor "esd": |
| | 45 | MAKEALL -a powerpc -v esd |
| | 46 | - build all PowerPC boards manufactured either by "keymile" or "siemens": |
| | 47 | MAKEALL -a powerpc -v keymile -v siemens |
| | 48 | - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards: |
| | 49 | MAKEALL -c mpc83xx -v freescale 4xx |
| | 50 | EOF |
| | 51 | exit ${ret} |
| | 52 | } |
| | 53 | |
| | 54 | SHORT_OPTS="ha:c:v:s:lmM" |
| | 55 | LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails" |
| | 56 | |
| | 57 | # Option processing based on util-linux-2.13/getopt-parse.bash |
| | 58 | |
| | 59 | # Note that we use `"$@"' to let each command-line parameter expand to a |
| | 60 | # separate word. The quotes around `$@' are essential! |
| | 61 | # We need TEMP as the `eval set --' would nuke the return value of |
| | 62 | # getopt. |
| | 63 | TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \ |
| | 64 | -n 'MAKEALL' -- "$@"` |
| | 65 | |
| | 66 | [ $? != 0 ] && usage 1 |
| | 67 | |
| | 68 | # Note the quotes around `$TEMP': they are essential! |
| | 69 | eval set -- "$TEMP" |
| | 70 | |
| | 71 | SELECTED='' |
| | 72 | ONLY_LIST='' |
| | 73 | PRINT_MAINTS='' |
| | 74 | MAINTAINERS_ONLY='' |
| | 75 | |
| | 76 | while true ; do |
| | 77 | case "$1" in |
| | 78 | -a|--arch) |
| | 79 | # echo "Option ARCH: argument \`$2'" |
| | 80 | if [ "$opt_a" ] ; then |
| | 81 | opt_a="${opt_a%)} || \$2 == \"$2\")" |
| | 82 | else |
| | 83 | opt_a="(\$2 == \"$2\")" |
| | 84 | fi |
| | 85 | SELECTED='y' |
| | 86 | shift 2 ;; |
| | 87 | -c|--cpu) |
| | 88 | # echo "Option CPU: argument \`$2'" |
| | 89 | if [ "$opt_c" ] ; then |
| | 90 | opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)" |
| | 91 | else |
| | 92 | opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)" |
| | 93 | fi |
| | 94 | SELECTED='y' |
| | 95 | shift 2 ;; |
| | 96 | -s|--soc) |
| | 97 | # echo "Option SoC: argument \`$2'" |
| | 98 | if [ "$opt_s" ] ; then |
| | 99 | opt_s="${opt_s%)} || \$6 == \"$2\")" |
| | 100 | else |
| | 101 | opt_s="(\$6 == \"$2\")" |
| | 102 | fi |
| | 103 | SELECTED='y' |
| | 104 | shift 2 ;; |
| | 105 | -v|--vendor) |
| | 106 | # echo "Option VENDOR: argument \`$2'" |
| | 107 | if [ "$opt_v" ] ; then |
| | 108 | opt_v="${opt_v%)} || \$5 == \"$2\")" |
| | 109 | else |
| | 110 | opt_v="(\$5 == \"$2\")" |
| | 111 | fi |
| | 112 | SELECTED='y' |
| | 113 | shift 2 ;; |
| | 114 | -l|--list) |
| | 115 | ONLY_LIST='y' |
| | 116 | shift ;; |
| | 117 | -m|--maintainers) |
| | 118 | ONLY_LIST='y' |
| | 119 | PRINT_MAINTS='y' |
| | 120 | MAINTAINERS_ONLY='y' |
| | 121 | shift ;; |
| | 122 | -M|--mails) |
| | 123 | ONLY_LIST='y' |
| | 124 | PRINT_MAINTS='y' |
| | 125 | shift ;; |
| | 126 | -h|--help) |
| | 127 | usage ;; |
| | 128 | --) |
| | 129 | shift ; break ;; |
| | 130 | *) |
| | 131 | echo "Internal error!" >&2 ; exit 1 ;; |
| | 132 | esac |
| | 133 | done |
| | 134 | # echo "Remaining arguments:" |
| | 135 | # for arg do echo '--> '"\`$arg'" ; done |
| | 136 | |
| | 137 | FILTER="\$1 !~ /^#/" |
| | 138 | [ "$opt_a" ] && FILTER="${FILTER} && $opt_a" |
| | 139 | [ "$opt_c" ] && FILTER="${FILTER} && $opt_c" |
| | 140 | [ "$opt_s" ] && FILTER="${FILTER} && $opt_s" |
| | 141 | [ "$opt_v" ] && FILTER="${FILTER} && $opt_v" |
| | 142 | |
| | 143 | if [ "$SELECTED" ] ; then |
| | 144 | SELECTED=$(awk '('"$FILTER"') { print $1 }' boards.cfg) |
| | 145 | |
| | 146 | # Make sure some boards from boards.cfg are actually found |
| | 147 | if [ -z "$SELECTED" ] ; then |
| | 148 | echo "Error: No boards selected, invalid arguments" |
| | 149 | exit 1 |
| | 150 | fi |
| | 151 | fi |
| | 152 | |
| | 153 | ######################################################################### |
| | 154 | |
| | 155 | # Print statistics when we exit |
| | 156 | trap exit 1 2 3 15 |
| | 157 | trap print_stats 0 |
| | 158 | |
| | 159 | # Determine number of CPU cores if no default was set |
| | 160 | : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"} |
| | 161 | |
| | 162 | if [ "$BUILD_NCPUS" -gt 1 ] |
| | 163 | then |
| | 164 | JOBS="-j $((BUILD_NCPUS + 1))" |
| | 165 | else |
| | 166 | JOBS="" |
| | 167 | fi |
| | 168 | |
| | 169 | |
| | 170 | if [ "${CROSS_COMPILE}" ] ; then |
| | 171 | MAKE="make CROSS_COMPILE=${CROSS_COMPILE}" |
| | 172 | else |
| | 173 | MAKE=make |
| | 174 | fi |
| | 175 | |
| | 176 | if [ "${MAKEALL_LOGDIR}" ] ; then |
| | 177 | LOG_DIR=${MAKEALL_LOGDIR} |
| | 178 | else |
| | 179 | LOG_DIR="LOG" |
| | 180 | fi |
| | 181 | |
| | 182 | : ${BUILD_NBUILDS:=1} |
| | 183 | BUILD_MANY=0 |
| | 184 | |
| | 185 | if [ "${BUILD_NBUILDS}" -gt 1 ] ; then |
| | 186 | BUILD_MANY=1 |
| | 187 | : ${BUILD_DIR:=./build} |
| | 188 | mkdir -p "${BUILD_DIR}/ERR" |
| | 189 | find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} + |
| | 190 | fi |
| | 191 | |
| | 192 | : ${BUILD_DIR:=.} |
| | 193 | |
| | 194 | OUTPUT_PREFIX="${BUILD_DIR}" |
| | 195 | |
| | 196 | [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1 |
| | 197 | find "${LOG_DIR}/" -type f -exec rm -f {} + |
| | 198 | |
| | 199 | LIST="" |
| | 200 | |
| | 201 | # Keep track of the number of builds and errors |
| | 202 | ERR_CNT=0 |
| | 203 | ERR_LIST="" |
| | 204 | WRN_CNT=0 |
| | 205 | WRN_LIST="" |
| | 206 | TOTAL_CNT=0 |
| | 207 | CURRENT_CNT=0 |
| | 208 | OLDEST_IDX=1 |
| | 209 | RC=0 |
| | 210 | |
| | 211 | # Helper funcs for parsing boards.cfg |
| | 212 | boards_by_field() |
| | 213 | { |
| | 214 | FS="[ \t]+" |
| | 215 | [ -n "$3" ] && FS="$3" |
| | 216 | awk \ |
| | 217 | -v field="$1" \ |
| | 218 | -v select="$2" \ |
| | 219 | -F "$FS" \ |
| | 220 | '($1 !~ /^#/ && $field == select) { print $1 }' \ |
| | 221 | boards.cfg |
| | 222 | } |
| | 223 | boards_by_arch() { boards_by_field 2 "$@" ; } |
| | 224 | boards_by_cpu() { boards_by_field 3 "$@" "[: \t]+" ; } |
| | 225 | boards_by_soc() { boards_by_field 6 "$@" ; } |
| | 226 | |
| | 227 | ######################################################################### |
| | 228 | ## MPC5xx Systems |
| | 229 | ######################################################################### |
| | 230 | |
| | 231 | LIST_5xx="$(boards_by_cpu mpc5xx)" |
| | 232 | |
| | 233 | ######################################################################### |
| | 234 | ## MPC5xxx Systems |
| | 235 | ######################################################################### |
| | 236 | |
| | 237 | LIST_5xxx="$(boards_by_cpu mpc5xxx)" |
| | 238 | |
| | 239 | ######################################################################### |
| | 240 | ## MPC512x Systems |
| | 241 | ######################################################################### |
| | 242 | |
| | 243 | LIST_512x="$(boards_by_cpu mpc512x)" |
| | 244 | |
| | 245 | ######################################################################### |
| | 246 | ## MPC8xx Systems |
| | 247 | ######################################################################### |
| | 248 | |
| | 249 | LIST_8xx="$(boards_by_cpu mpc8xx)" |
| | 250 | |
| | 251 | ######################################################################### |
| | 252 | ## PPC4xx Systems |
| | 253 | ######################################################################### |
| | 254 | |
| | 255 | LIST_4xx="$(boards_by_cpu ppc4xx)" |
| | 256 | |
| | 257 | ######################################################################### |
| | 258 | ## MPC8220 Systems |
| | 259 | ######################################################################### |
| | 260 | |
| | 261 | LIST_8220="$(boards_by_cpu mpc8220)" |
| | 262 | |
| | 263 | ######################################################################### |
| | 264 | ## MPC824x Systems |
| | 265 | ######################################################################### |
| | 266 | |
| | 267 | LIST_824x="$(boards_by_cpu mpc824x)" |
| | 268 | |
| | 269 | ######################################################################### |
| | 270 | ## MPC8260 Systems (includes 8250, 8255 etc.) |
| | 271 | ######################################################################### |
| | 272 | |
| | 273 | LIST_8260="$(boards_by_cpu mpc8260)" |
| | 274 | |
| | 275 | ######################################################################### |
| | 276 | ## MPC83xx Systems (includes 8349, etc.) |
| | 277 | ######################################################################### |
| | 278 | |
| | 279 | LIST_83xx="$(boards_by_cpu mpc83xx)" |
| | 280 | |
| | 281 | ######################################################################### |
| | 282 | ## MPC85xx Systems (includes 8540, 8560 etc.) |
| | 283 | ######################################################################### |
| | 284 | |
| | 285 | LIST_85xx="$(boards_by_cpu mpc85xx)" |
| | 286 | |
| | 287 | ######################################################################### |
| | 288 | ## MPC86xx Systems |
| | 289 | ######################################################################### |
| | 290 | |
| | 291 | LIST_86xx="$(boards_by_cpu mpc86xx)" |
| | 292 | |
| | 293 | ######################################################################### |
| | 294 | ## 74xx/7xx Systems |
| | 295 | ######################################################################### |
| | 296 | |
| | 297 | LIST_74xx_7xx="$(boards_by_cpu 74xx_7xx)" |
| | 298 | |
| | 299 | ######################################################################### |
| | 300 | ## PowerPC groups |
| | 301 | ######################################################################### |
| | 302 | |
| | 303 | LIST_TSEC=" \ |
| | 304 | ${LIST_83xx} \ |
| | 305 | ${LIST_85xx} \ |
| | 306 | ${LIST_86xx} \ |
| | 307 | " |
| | 308 | |
| | 309 | LIST_powerpc=" \ |
| | 310 | ${LIST_5xx} \ |
| | 311 | ${LIST_512x} \ |
| | 312 | ${LIST_5xxx} \ |
| | 313 | ${LIST_8xx} \ |
| | 314 | ${LIST_8220} \ |
| | 315 | ${LIST_824x} \ |
| | 316 | ${LIST_8260} \ |
| | 317 | ${LIST_83xx} \ |
| | 318 | ${LIST_85xx} \ |
| | 319 | ${LIST_86xx} \ |
| | 320 | ${LIST_4xx} \ |
| | 321 | ${LIST_74xx_7xx}\ |
| | 322 | " |
| | 323 | |
| | 324 | # Alias "ppc" -> "powerpc" to not break compatibility with older scripts |
| | 325 | # still using "ppc" instead of "powerpc" |
| | 326 | LIST_ppc=" \ |
| | 327 | ${LIST_powerpc} \ |
| | 328 | " |
| | 329 | |
| | 330 | ######################################################################### |
| | 331 | ## StrongARM Systems |
| | 332 | ######################################################################### |
| | 333 | |
| | 334 | LIST_SA="$(boards_by_cpu sa1100)" |
| | 335 | |
| | 336 | ######################################################################### |
| | 337 | ## ARM7 Systems |
| | 338 | ######################################################################### |
| | 339 | |
| | 340 | LIST_ARM7="$(boards_by_cpu arm720t)" |
| | 341 | |
| | 342 | ######################################################################### |
| | 343 | ## ARM9 Systems |
| | 344 | ######################################################################### |
| | 345 | |
| | 346 | LIST_ARM9="$(boards_by_cpu arm920t) \ |
| | 347 | $(boards_by_cpu arm926ejs) \ |
| | 348 | $(boards_by_cpu arm925t) \ |
| | 349 | $(boards_by_cpu arm946es) \ |
| | 350 | " |
| | 351 | |
| | 352 | ######################################################################### |
| | 353 | ## ARM11 Systems |
| | 354 | ######################################################################### |
| | 355 | LIST_ARM11="$(boards_by_cpu arm1136) \ |
| | 356 | $(boards_by_cpu arm1176) \ |
| | 357 | " |
| | 358 | |
| | 359 | ######################################################################### |
| | 360 | ## ARMV7 Systems |
| | 361 | ######################################################################### |
| | 362 | |
| | 363 | LIST_ARMV7="$(boards_by_cpu armv7)" |
| | 364 | |
| | 365 | ######################################################################### |
| | 366 | ## AT91 Systems |
| | 367 | ######################################################################### |
| | 368 | |
| | 369 | LIST_at91="$(boards_by_soc at91)" |
| | 370 | |
| | 371 | ######################################################################### |
| | 372 | ## Xscale Systems |
| | 373 | ######################################################################### |
| | 374 | |
| | 375 | LIST_pxa="$(boards_by_cpu pxa)" |
| | 376 | |
| | 377 | LIST_ixp="$(boards_by_cpu ixp)" |
| | 378 | |
| | 379 | ######################################################################### |
| | 380 | ## ARM groups |
| | 381 | ######################################################################### |
| | 382 | |
| | 383 | LIST_arm="$(boards_by_arch arm)" |
| | 384 | |
| | 385 | ######################################################################### |
| | 386 | ## MIPS Systems (default = big endian) |
| | 387 | ######################################################################### |
| | 388 | |
| | 389 | LIST_mips4kc=" \ |
| | 390 | incaip \ |
| | 391 | incaip_100MHz \ |
| | 392 | incaip_133MHz \ |
| | 393 | incaip_150MHz \ |
| | 394 | qemu_mips \ |
| | 395 | vct_platinum \ |
| | 396 | vct_platinum_small \ |
| | 397 | vct_platinum_onenand \ |
| | 398 | vct_platinum_onenand_small \ |
| | 399 | vct_platinumavc \ |
| | 400 | vct_platinumavc_small \ |
| | 401 | vct_platinumavc_onenand \ |
| | 402 | vct_platinumavc_onenand_small \ |
| | 403 | vct_premium \ |
| | 404 | vct_premium_small \ |
| | 405 | vct_premium_onenand \ |
| | 406 | vct_premium_onenand_small \ |
| | 407 | " |
| | 408 | |
| | 409 | LIST_au1xx0=" \ |
| | 410 | dbau1000 \ |
| | 411 | dbau1100 \ |
| | 412 | dbau1500 \ |
| | 413 | dbau1550 \ |
| | 414 | " |
| | 415 | |
| | 416 | LIST_mips=" \ |
| | 417 | ${LIST_mips4kc} \ |
| | 418 | ${LIST_mips5kc} \ |
| | 419 | ${LIST_au1xx0} \ |
| | 420 | " |
| | 421 | |
| | 422 | ######################################################################### |
| | 423 | ## MIPS Systems (little endian) |
| | 424 | ######################################################################### |
| | 425 | |
| | 426 | LIST_xburst_el=" \ |
| | 427 | qi_lb60 \ |
| | 428 | " |
| | 429 | |
| | 430 | LIST_au1xx0_el=" \ |
| | 431 | dbau1550_el \ |
| | 432 | pb1000 \ |
| | 433 | " |
| | 434 | LIST_mips_el=" \ |
| | 435 | ${LIST_xburst_el} \ |
| | 436 | ${LIST_au1xx0_el} \ |
| | 437 | " |
| | 438 | ######################################################################### |
| | 439 | ## OpenRISC Systems |
| | 440 | ######################################################################### |
| | 441 | |
| | 442 | LIST_openrisc="$(boards_by_arch openrisc)" |
| | 443 | |
| | 444 | ######################################################################### |
| | 445 | ## x86 Systems |
| | 446 | ######################################################################### |
| | 447 | |
| | 448 | LIST_x86="$(boards_by_arch x86)" |
| | 449 | |
| | 450 | ######################################################################### |
| | 451 | ## Nios-II Systems |
| | 452 | ######################################################################### |
| | 453 | |
| | 454 | LIST_nios2="$(boards_by_arch nios2)" |
| | 455 | |
| | 456 | ######################################################################### |
| | 457 | ## MicroBlaze Systems |
| | 458 | ######################################################################### |
| | 459 | |
| | 460 | LIST_microblaze="$(boards_by_arch microblaze)" |
| | 461 | |
| | 462 | ######################################################################### |
| | 463 | ## ColdFire Systems |
| | 464 | ######################################################################### |
| | 465 | |
| | 466 | LIST_m68k="$(boards_by_arch m68k)" |
| | 467 | LIST_coldfire=${LIST_m68k} |
| | 468 | |
| | 469 | ######################################################################### |
| | 470 | ## AVR32 Systems |
| | 471 | ######################################################################### |
| | 472 | |
| | 473 | LIST_avr32="$(boards_by_arch avr32)" |
| | 474 | |
| | 475 | ######################################################################### |
| | 476 | ## Blackfin Systems |
| | 477 | ######################################################################### |
| | 478 | |
| | 479 | LIST_blackfin="$(boards_by_arch blackfin)" |
| | 480 | |
| | 481 | ######################################################################### |
| | 482 | ## SH Systems |
| | 483 | ######################################################################### |
| | 484 | |
| | 485 | LIST_sh2="$(boards_by_cpu sh2)" |
| | 486 | LIST_sh3="$(boards_by_cpu sh3)" |
| | 487 | LIST_sh4="$(boards_by_cpu sh4)" |
| | 488 | |
| | 489 | LIST_sh="$(boards_by_arch sh)" |
| | 490 | |
| | 491 | ######################################################################### |
| | 492 | ## SPARC Systems |
| | 493 | ######################################################################### |
| | 494 | |
| | 495 | LIST_sparc="$(boards_by_arch sparc)" |
| | 496 | |
| | 497 | ######################################################################### |
| | 498 | ## NDS32 Systems |
| | 499 | ######################################################################### |
| | 500 | |
| | 501 | LIST_nds32="$(boards_by_arch nds32)" |
| | 502 | |
| | 503 | #----------------------------------------------------------------------- |
| | 504 | |
| | 505 | get_target_location() { |
| | 506 | local target=$1 |
| | 507 | local BOARD_NAME="" |
| | 508 | local CONFIG_NAME="" |
| | 509 | local board="" |
| | 510 | local vendor="" |
| | 511 | |
| | 512 | # Automatic mode |
| | 513 | local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg` |
| | 514 | |
| | 515 | if [ -z "${line}" ] ; then echo "" ; return ; fi |
| | 516 | |
| | 517 | set ${line} |
| | 518 | |
| | 519 | # add default board name if needed |
| | 520 | [ $# = 3 ] && set ${line} ${1} |
| | 521 | |
| | 522 | CONFIG_NAME="${1%_config}" |
| | 523 | |
| | 524 | [ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}" |
| | 525 | |
| | 526 | if [ "$4" = "-" ] ; then |
| | 527 | board=${BOARD_NAME} |
| | 528 | else |
| | 529 | board="$4" |
| | 530 | fi |
| | 531 | |
| | 532 | [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5" |
| | 533 | [ $# -gt 6 ] && [ "$7" != "-" ] && { |
| | 534 | tmp="${7%:*}" |
| | 535 | if [ "$tmp" ] ; then |
| | 536 | CONFIG_NAME="$tmp" |
| | 537 | fi |
| | 538 | } |
| | 539 | |
| | 540 | # Assign board directory to BOARDIR variable |
| | 541 | if [ -z "${vendor}" ] ; then |
| | 542 | BOARDDIR=${board} |
| | 543 | else |
| | 544 | BOARDDIR=${vendor}/${board} |
| | 545 | fi |
| | 546 | |
| | 547 | echo "${CONFIG_NAME}:${BOARDDIR}" |
| | 548 | } |
| | 549 | |
| | 550 | get_target_maintainers() { |
| | 551 | local name=`echo $1 | cut -d : -f 1` |
| | 552 | |
| | 553 | if ! grep -qsi "[[:blank:]]${name}[[:blank:]]" MAINTAINERS ; then |
| | 554 | echo "" |
| | 555 | return ; |
| | 556 | fi |
| | 557 | |
| | 558 | local line=`tac MAINTAINERS | grep -ni "[[:blank:]]${name}[[:blank:]]" | cut -d : -f 1` |
| | 559 | local mail=`tac MAINTAINERS | tail -n +${line} | \ |
| | 560 | sed -n ":start /.*@.*/ { b mail } ; n ; b start ; :mail /.*@.*/ { p ; n ; b mail } ; q" | \ |
| | 561 | sed "s/^.*<//;s/>.*$//"` |
| | 562 | echo "$mail" |
| | 563 | } |
| | 564 | |
| | 565 | list_target() { |
| | 566 | if [ "$PRINT_MAINTS" != 'y' ] ; then |
| | 567 | echo "$1" |
| | 568 | return |
| | 569 | fi |
| | 570 | |
| | 571 | echo -n "$1:" |
| | 572 | |
| | 573 | local loc=`get_target_location $1` |
| | 574 | |
| | 575 | if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi |
| | 576 | |
| | 577 | local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"` |
| | 578 | |
| | 579 | if [ "$MAINTAINERS_ONLY" != 'y' ] ; then |
| | 580 | |
| | 581 | local dir=`echo ${loc} | cut -d ":" -f 2` |
| | 582 | local cfg=`echo ${loc} | cut -d ":" -f 1` |
| | 583 | local git_result=`git log --format=%aE board/${dir} \ |
| | 584 | include/configs/${cfg}.h | grep "@"` |
| | 585 | local git_result_recent=`echo ${git_result} | tr " " "\n" | \ |
| | 586 | head -n 3` |
| | 587 | local git_result_top=`echo ${git_result} | tr " " "\n" | \ |
| | 588 | sort | uniq -c | sort -nr | head -n 3 | \ |
| | 589 | sed "s/^ \+[0-9]\+ \+//"` |
| | 590 | |
| | 591 | echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \ |
| | 592 | sort -u | tr "\n" " " | sed "s/ $//" ; |
| | 593 | else |
| | 594 | echo -e "$maintainers_result" | sort -u | tr "\n" " " | \ |
| | 595 | sed "s/ $//" ; |
| | 596 | fi |
| | 597 | |
| | 598 | echo "" |
| | 599 | } |
| | 600 | |
| | 601 | # Each finished build will have a file called ${donep}${n}, |
| | 602 | # where n is the index of the build. Each build |
| | 603 | # we've already noted as finished will have ${skipp}${n}. |
| | 604 | # The code managing the build process will use this information |
| | 605 | # to ensure that only BUILD_NBUILDS builds are in flight at once |
| | 606 | donep="${LOG_DIR}/._done_" |
| | 607 | skipp="${LOG_DIR}/._skip_" |
| | 608 | |
| | 609 | build_target() { |
| | 610 | target=$1 |
| | 611 | build_idx=$2 |
| | 612 | |
| | 613 | if [ "$ONLY_LIST" == 'y' ] ; then |
| | 614 | list_target ${target} |
| | 615 | return |
| | 616 | fi |
| | 617 | |
| | 618 | if [ $BUILD_MANY == 1 ] ; then |
| | 619 | output_dir="${OUTPUT_PREFIX}/${target}" |
| | 620 | mkdir -p "${output_dir}" |
| | 621 | else |
| | 622 | output_dir="${OUTPUT_PREFIX}" |
| | 623 | fi |
| | 624 | |
| | 625 | export BUILD_DIR="${output_dir}" |
| | 626 | |
| | 627 | ${MAKE} distclean >/dev/null |
| | 628 | ${MAKE} -s ${target}_config |
| | 629 | |
| | 630 | ${MAKE} ${JOBS} all \ |
| | 631 | >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR |
| | 632 | |
| | 633 | # Check for 'make' errors |
| | 634 | if [ ${PIPESTATUS[0]} -ne 0 ] ; then |
| | 635 | RC=1 |
| | 636 | fi |
| | 637 | |
| | 638 | if [ $BUILD_MANY == 1 ] ; then |
| | 639 | ${MAKE} tidy |
| | 640 | |
| | 641 | if [ -s ${LOG_DIR}/${target}.ERR ] ; then |
| | 642 | cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target} |
| | 643 | else |
| | 644 | rm ${LOG_DIR}/${target}.ERR |
| | 645 | fi |
| | 646 | else |
| | 647 | if [ -s ${LOG_DIR}/${target}.ERR ] ; then |
| | 648 | if grep -iw error ${LOG_DIR}/${target}.ERR ; then |
| | 649 | : $(( ERR_CNT += 1 )) |
| | 650 | ERR_LIST="${ERR_LIST} $target" |
| | 651 | else |
| | 652 | : $(( WRN_CNT += 1 )) |
| | 653 | WRN_LIST="${WRN_LIST} $target" |
| | 654 | fi |
| | 655 | else |
| | 656 | rm ${LOG_DIR}/${target}.ERR |
| | 657 | fi |
| | 658 | fi |
| | 659 | |
| | 660 | OBJS=${output_dir}/u-boot |
| | 661 | if [ -e ${output_dir}/spl/u-boot-spl ]; then |
| | 662 | OBJS="${OBJS} ${output_dir}/spl/u-boot-spl" |
| | 663 | fi |
| | 664 | |
| | 665 | ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG |
| | 666 | |
| | 667 | [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR" |
| | 668 | |
| | 669 | touch "${donep}${build_idx}" |
| | 670 | } |
| | 671 | |
| | 672 | manage_builds() { |
| | 673 | search_idx=${OLDEST_IDX} |
| | 674 | if [ "$ONLY_LIST" == 'y' ] ; then return ; fi |
| | 675 | |
| | 676 | while true; do |
| | 677 | if [ -e "${donep}${search_idx}" ] ; then |
| | 678 | : $(( CURRENT_CNT-- )) |
| | 679 | [ ${OLDEST_IDX} -eq ${search_idx} ] && |
| | 680 | : $(( OLDEST_IDX++ )) |
| | 681 | |
| | 682 | # Only want to count it once |
| | 683 | rm -f "${donep}${search_idx}" |
| | 684 | touch "${skipp}${search_idx}" |
| | 685 | elif [ -e "${skipp}${search_idx}" ] ; then |
| | 686 | [ ${OLDEST_IDX} -eq ${search_idx} ] && |
| | 687 | : $(( OLDEST_IDX++ )) |
| | 688 | fi |
| | 689 | : $(( search_idx++ )) |
| | 690 | if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then |
| | 691 | if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then |
| | 692 | search_idx=${OLDEST_IDX} |
| | 693 | sleep 1 |
| | 694 | else |
| | 695 | break |
| | 696 | fi |
| | 697 | fi |
| | 698 | done |
| | 699 | } |
| | 700 | |
| | 701 | build_targets() { |
| | 702 | for t in "$@" ; do |
| | 703 | # If a LIST_xxx var exists, use it. But avoid variable |
| | 704 | # expansion in the eval when a board name contains certain |
| | 705 | # characters that the shell interprets. |
| | 706 | case ${t} in |
| | 707 | *[-+=]*) list= ;; |
| | 708 | *) list=$(eval echo '${LIST_'$t'}') ;; |
| | 709 | esac |
| | 710 | if [ -n "${list}" ] ; then |
| | 711 | build_targets ${list} |
| | 712 | else |
| | 713 | : $((TOTAL_CNT += 1)) |
| | 714 | : $((CURRENT_CNT += 1)) |
| | 715 | rm -f "${donep}${TOTAL_CNT}" |
| | 716 | rm -f "${skipp}${TOTAL_CNT}" |
| | 717 | if [ $BUILD_MANY == 1 ] ; then |
| | 718 | build_target ${t} ${TOTAL_CNT} & |
| | 719 | else |
| | 720 | build_target ${t} ${TOTAL_CNT} |
| | 721 | fi |
| | 722 | fi |
| | 723 | |
| | 724 | # We maintain a running count of all the builds we have done. |
| | 725 | # Each finished build will have a file called ${donep}${n}, |
| | 726 | # where n is the index of the build. Each build |
| | 727 | # we've already noted as finished will have ${skipp}${n}. |
| | 728 | # We track the current index via TOTAL_CNT, and the oldest |
| | 729 | # index. When we exceed the maximum number of parallel builds, |
| | 730 | # We look from oldest to current for builds that have completed, |
| | 731 | # and update the current count and oldest index as appropriate. |
| | 732 | # If we've gone through the entire list, wait a second, and |
| | 733 | # reprocess the entire list until we find a build that has |
| | 734 | # completed |
| | 735 | if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then |
| | 736 | manage_builds |
| | 737 | fi |
| | 738 | done |
| | 739 | } |
| | 740 | |
| | 741 | #----------------------------------------------------------------------- |
| | 742 | |
| | 743 | kill_children() { |
| | 744 | kill -- "-$1" |
| | 745 | |
| | 746 | exit |
| | 747 | } |
| | 748 | |
| | 749 | print_stats() { |
| | 750 | if [ "$ONLY_LIST" == 'y' ] ; then return ; fi |
| | 751 | |
| | 752 | rm -f ${donep}* ${skipp}* |
| | 753 | |
| | 754 | if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then |
| | 755 | ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/` |
| | 756 | ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done` |
| | 757 | ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'` |
| | 758 | WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/` |
| | 759 | WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done` |
| | 760 | WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'` |
| | 761 | fi |
| | 762 | |
| | 763 | echo "" |
| | 764 | echo "--------------------- SUMMARY ----------------------------" |
| | 765 | echo "Boards compiled: ${TOTAL_CNT}" |
| | 766 | if [ ${ERR_CNT} -gt 0 ] ; then |
| | 767 | echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )" |
| | 768 | fi |
| | 769 | if [ ${WRN_CNT} -gt 0 ] ; then |
| | 770 | echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )" |
| | 771 | fi |
| | 772 | echo "----------------------------------------------------------" |
| | 773 | |
| | 774 | if [ $BUILD_MANY == 1 ] ; then |
| | 775 | kill_children $$ & |
| | 776 | fi |
| | 777 | |
| | 778 | exit $RC |
| | 779 | } |
| | 780 | |
| | 781 | #----------------------------------------------------------------------- |
| | 782 | |
| | 783 | # Build target groups selected by options, plus any command line args |
| | 784 | set -- ${SELECTED} "$@" |
| | 785 | # run PowerPC by default |
| | 786 | [ $# = 0 ] && set -- powerpc |
| | 787 | build_targets "$@" |
| | 788 | wait |
projects / u-boot.git / blame_incremental