]>
Commit | Line | Data |
---|---|---|
5b1b1883 VK |
1 | /* |
2 | * (C) Copyright 2010 | |
3 | * Vipin Kumar, ST Micoelectronics, [email protected]. | |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | */ | |
23 | ||
24 | /* | |
25 | * Designware ethernet IP driver for u-boot | |
26 | */ | |
27 | ||
28 | #include <common.h> | |
29 | #include <miiphy.h> | |
30 | #include <malloc.h> | |
ef76025a | 31 | #include <linux/compiler.h> |
5b1b1883 VK |
32 | #include <linux/err.h> |
33 | #include <asm/io.h> | |
34 | #include "designware.h" | |
35 | ||
13edd170 VK |
36 | static int configure_phy(struct eth_device *dev); |
37 | ||
5b1b1883 VK |
38 | static void tx_descs_init(struct eth_device *dev) |
39 | { | |
40 | struct dw_eth_dev *priv = dev->priv; | |
41 | struct eth_dma_regs *dma_p = priv->dma_regs_p; | |
42 | struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0]; | |
43 | char *txbuffs = &priv->txbuffs[0]; | |
44 | struct dmamacdescr *desc_p; | |
45 | u32 idx; | |
46 | ||
47 | for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) { | |
48 | desc_p = &desc_table_p[idx]; | |
49 | desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE]; | |
50 | desc_p->dmamac_next = &desc_table_p[idx + 1]; | |
51 | ||
52 | #if defined(CONFIG_DW_ALTDESCRIPTOR) | |
53 | desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST | | |
54 | DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \ | |
55 | DESC_TXSTS_TXCHECKINSCTRL | \ | |
56 | DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS); | |
57 | ||
58 | desc_p->txrx_status |= DESC_TXSTS_TXCHAIN; | |
59 | desc_p->dmamac_cntl = 0; | |
60 | desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA); | |
61 | #else | |
62 | desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN; | |
63 | desc_p->txrx_status = 0; | |
64 | #endif | |
65 | } | |
66 | ||
67 | /* Correcting the last pointer of the chain */ | |
68 | desc_p->dmamac_next = &desc_table_p[0]; | |
69 | ||
70 | writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr); | |
71 | } | |
72 | ||
73 | static void rx_descs_init(struct eth_device *dev) | |
74 | { | |
75 | struct dw_eth_dev *priv = dev->priv; | |
76 | struct eth_dma_regs *dma_p = priv->dma_regs_p; | |
77 | struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0]; | |
78 | char *rxbuffs = &priv->rxbuffs[0]; | |
79 | struct dmamacdescr *desc_p; | |
80 | u32 idx; | |
81 | ||
82 | for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) { | |
83 | desc_p = &desc_table_p[idx]; | |
84 | desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE]; | |
85 | desc_p->dmamac_next = &desc_table_p[idx + 1]; | |
86 | ||
87 | desc_p->dmamac_cntl = | |
88 | (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \ | |
89 | DESC_RXCTRL_RXCHAIN; | |
90 | ||
91 | desc_p->txrx_status = DESC_RXSTS_OWNBYDMA; | |
92 | } | |
93 | ||
94 | /* Correcting the last pointer of the chain */ | |
95 | desc_p->dmamac_next = &desc_table_p[0]; | |
96 | ||
97 | writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr); | |
98 | } | |
99 | ||
100 | static void descs_init(struct eth_device *dev) | |
101 | { | |
102 | tx_descs_init(dev); | |
103 | rx_descs_init(dev); | |
104 | } | |
105 | ||
106 | static int mac_reset(struct eth_device *dev) | |
107 | { | |
108 | struct dw_eth_dev *priv = dev->priv; | |
109 | struct eth_mac_regs *mac_p = priv->mac_regs_p; | |
110 | struct eth_dma_regs *dma_p = priv->dma_regs_p; | |
111 | ||
cafabe19 | 112 | ulong start; |
5b1b1883 VK |
113 | int timeout = CONFIG_MACRESET_TIMEOUT; |
114 | ||
115 | writel(DMAMAC_SRST, &dma_p->busmode); | |
116 | writel(MII_PORTSELECT, &mac_p->conf); | |
117 | ||
cafabe19 AV |
118 | start = get_timer(0); |
119 | while (get_timer(start) < timeout) { | |
5b1b1883 VK |
120 | if (!(readl(&dma_p->busmode) & DMAMAC_SRST)) |
121 | return 0; | |
cafabe19 AV |
122 | |
123 | /* Try again after 10usec */ | |
124 | udelay(10); | |
125 | }; | |
5b1b1883 VK |
126 | |
127 | return -1; | |
128 | } | |
129 | ||
130 | static int dw_write_hwaddr(struct eth_device *dev) | |
131 | { | |
132 | struct dw_eth_dev *priv = dev->priv; | |
133 | struct eth_mac_regs *mac_p = priv->mac_regs_p; | |
134 | u32 macid_lo, macid_hi; | |
135 | u8 *mac_id = &dev->enetaddr[0]; | |
136 | ||
137 | macid_lo = mac_id[0] + (mac_id[1] << 8) + \ | |
138 | (mac_id[2] << 16) + (mac_id[3] << 24); | |
139 | macid_hi = mac_id[4] + (mac_id[5] << 8); | |
140 | ||
141 | writel(macid_hi, &mac_p->macaddr0hi); | |
142 | writel(macid_lo, &mac_p->macaddr0lo); | |
143 | ||
144 | return 0; | |
145 | } | |
146 | ||
147 | static int dw_eth_init(struct eth_device *dev, bd_t *bis) | |
148 | { | |
149 | struct dw_eth_dev *priv = dev->priv; | |
150 | struct eth_mac_regs *mac_p = priv->mac_regs_p; | |
151 | struct eth_dma_regs *dma_p = priv->dma_regs_p; | |
152 | u32 conf; | |
153 | ||
13edd170 VK |
154 | if (priv->phy_configured != 1) |
155 | configure_phy(dev); | |
156 | ||
ef76025a SR |
157 | /* Print link status only once */ |
158 | if (!priv->link_printed) { | |
159 | printf("ENET Speed is %d Mbps - %s duplex connection\n", | |
160 | priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); | |
161 | priv->link_printed = 1; | |
162 | } | |
163 | ||
5b1b1883 VK |
164 | /* Reset ethernet hardware */ |
165 | if (mac_reset(dev) < 0) | |
166 | return -1; | |
167 | ||
c7f6dbe7 VK |
168 | /* Resore the HW MAC address as it has been lost during MAC reset */ |
169 | dw_write_hwaddr(dev); | |
170 | ||
5b1b1883 VK |
171 | writel(FIXEDBURST | PRIORXTX_41 | BURST_16, |
172 | &dma_p->busmode); | |
173 | ||
66f119e5 DN |
174 | writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD | |
175 | TXSECONDFRAME, &dma_p->opmode); | |
5b1b1883 VK |
176 | |
177 | conf = FRAMEBURSTENABLE | DISABLERXOWN; | |
178 | ||
ef76025a | 179 | if (priv->speed != 1000) |
5b1b1883 VK |
180 | conf |= MII_PORTSELECT; |
181 | ||
9afc1af0 VK |
182 | if ((priv->interface != PHY_INTERFACE_MODE_MII) && |
183 | (priv->interface != PHY_INTERFACE_MODE_GMII)) { | |
184 | ||
ef76025a | 185 | if (priv->speed == 100) |
9afc1af0 VK |
186 | conf |= FES_100; |
187 | } | |
188 | ||
ef76025a | 189 | if (priv->duplex == FULL) |
5b1b1883 VK |
190 | conf |= FULLDPLXMODE; |
191 | ||
192 | writel(conf, &mac_p->conf); | |
193 | ||
194 | descs_init(dev); | |
195 | ||
196 | /* | |
197 | * Start/Enable xfer at dma as well as mac level | |
198 | */ | |
199 | writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode); | |
200 | writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode); | |
201 | ||
aa51005c | 202 | writel(readl(&mac_p->conf) | RXENABLE | TXENABLE, &mac_p->conf); |
5b1b1883 VK |
203 | |
204 | return 0; | |
205 | } | |
206 | ||
10cbe3b6 | 207 | static int dw_eth_send(struct eth_device *dev, void *packet, int length) |
5b1b1883 VK |
208 | { |
209 | struct dw_eth_dev *priv = dev->priv; | |
210 | struct eth_dma_regs *dma_p = priv->dma_regs_p; | |
211 | u32 desc_num = priv->tx_currdescnum; | |
212 | struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num]; | |
213 | ||
214 | /* Check if the descriptor is owned by CPU */ | |
215 | if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) { | |
216 | printf("CPU not owner of tx frame\n"); | |
217 | return -1; | |
218 | } | |
219 | ||
10cbe3b6 | 220 | memcpy((void *)desc_p->dmamac_addr, packet, length); |
5b1b1883 VK |
221 | |
222 | #if defined(CONFIG_DW_ALTDESCRIPTOR) | |
223 | desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST; | |
224 | desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \ | |
225 | DESC_TXCTRL_SIZE1MASK; | |
226 | ||
227 | desc_p->txrx_status &= ~(DESC_TXSTS_MSK); | |
228 | desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA; | |
229 | #else | |
230 | desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \ | |
231 | DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \ | |
232 | DESC_TXCTRL_TXFIRST; | |
233 | ||
234 | desc_p->txrx_status = DESC_TXSTS_OWNBYDMA; | |
235 | #endif | |
236 | ||
237 | /* Test the wrap-around condition. */ | |
238 | if (++desc_num >= CONFIG_TX_DESCR_NUM) | |
239 | desc_num = 0; | |
240 | ||
241 | priv->tx_currdescnum = desc_num; | |
242 | ||
243 | /* Start the transmission */ | |
244 | writel(POLL_DATA, &dma_p->txpolldemand); | |
245 | ||
246 | return 0; | |
247 | } | |
248 | ||
249 | static int dw_eth_recv(struct eth_device *dev) | |
250 | { | |
251 | struct dw_eth_dev *priv = dev->priv; | |
252 | u32 desc_num = priv->rx_currdescnum; | |
253 | struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; | |
254 | ||
255 | u32 status = desc_p->txrx_status; | |
256 | int length = 0; | |
257 | ||
258 | /* Check if the owner is the CPU */ | |
259 | if (!(status & DESC_RXSTS_OWNBYDMA)) { | |
260 | ||
261 | length = (status & DESC_RXSTS_FRMLENMSK) >> \ | |
262 | DESC_RXSTS_FRMLENSHFT; | |
263 | ||
264 | NetReceive(desc_p->dmamac_addr, length); | |
265 | ||
266 | /* | |
267 | * Make the current descriptor valid again and go to | |
268 | * the next one | |
269 | */ | |
270 | desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA; | |
271 | ||
272 | /* Test the wrap-around condition. */ | |
273 | if (++desc_num >= CONFIG_RX_DESCR_NUM) | |
274 | desc_num = 0; | |
275 | } | |
276 | ||
277 | priv->rx_currdescnum = desc_num; | |
278 | ||
279 | return length; | |
280 | } | |
281 | ||
282 | static void dw_eth_halt(struct eth_device *dev) | |
283 | { | |
284 | struct dw_eth_dev *priv = dev->priv; | |
285 | ||
286 | mac_reset(dev); | |
287 | priv->tx_currdescnum = priv->rx_currdescnum = 0; | |
288 | } | |
289 | ||
290 | static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val) | |
291 | { | |
292 | struct dw_eth_dev *priv = dev->priv; | |
293 | struct eth_mac_regs *mac_p = priv->mac_regs_p; | |
cafabe19 | 294 | ulong start; |
5b1b1883 VK |
295 | u32 miiaddr; |
296 | int timeout = CONFIG_MDIO_TIMEOUT; | |
297 | ||
298 | miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ | |
299 | ((reg << MIIREGSHIFT) & MII_REGMSK); | |
300 | ||
301 | writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); | |
302 | ||
cafabe19 AV |
303 | start = get_timer(0); |
304 | while (get_timer(start) < timeout) { | |
5b1b1883 VK |
305 | if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { |
306 | *val = readl(&mac_p->miidata); | |
307 | return 0; | |
308 | } | |
cafabe19 AV |
309 | |
310 | /* Try again after 10usec */ | |
311 | udelay(10); | |
312 | }; | |
5b1b1883 VK |
313 | |
314 | return -1; | |
315 | } | |
316 | ||
317 | static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val) | |
318 | { | |
319 | struct dw_eth_dev *priv = dev->priv; | |
320 | struct eth_mac_regs *mac_p = priv->mac_regs_p; | |
cafabe19 | 321 | ulong start; |
5b1b1883 VK |
322 | u32 miiaddr; |
323 | int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; | |
324 | u16 value; | |
325 | ||
326 | writel(val, &mac_p->miidata); | |
327 | miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ | |
328 | ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE; | |
329 | ||
330 | writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); | |
331 | ||
cafabe19 AV |
332 | start = get_timer(0); |
333 | while (get_timer(start) < timeout) { | |
c7f6dbe7 | 334 | if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { |
5b1b1883 | 335 | ret = 0; |
c7f6dbe7 VK |
336 | break; |
337 | } | |
cafabe19 AV |
338 | |
339 | /* Try again after 10usec */ | |
340 | udelay(10); | |
341 | }; | |
5b1b1883 VK |
342 | |
343 | /* Needed as a fix for ST-Phy */ | |
344 | eth_mdio_read(dev, addr, reg, &value); | |
345 | ||
346 | return ret; | |
347 | } | |
348 | ||
349 | #if defined(CONFIG_DW_SEARCH_PHY) | |
350 | static int find_phy(struct eth_device *dev) | |
351 | { | |
352 | int phy_addr = 0; | |
353 | u16 ctrl, oldctrl; | |
354 | ||
355 | do { | |
8ef583a0 MF |
356 | eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); |
357 | oldctrl = ctrl & BMCR_ANENABLE; | |
5b1b1883 | 358 | |
8ef583a0 MF |
359 | ctrl ^= BMCR_ANENABLE; |
360 | eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl); | |
361 | eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); | |
362 | ctrl &= BMCR_ANENABLE; | |
5b1b1883 VK |
363 | |
364 | if (ctrl == oldctrl) { | |
365 | phy_addr++; | |
366 | } else { | |
8ef583a0 MF |
367 | ctrl ^= BMCR_ANENABLE; |
368 | eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl); | |
5b1b1883 VK |
369 | |
370 | return phy_addr; | |
371 | } | |
372 | } while (phy_addr < 32); | |
373 | ||
374 | return -1; | |
375 | } | |
376 | #endif | |
377 | ||
378 | static int dw_reset_phy(struct eth_device *dev) | |
379 | { | |
380 | struct dw_eth_dev *priv = dev->priv; | |
381 | u16 ctrl; | |
cafabe19 | 382 | ulong start; |
5b1b1883 VK |
383 | int timeout = CONFIG_PHYRESET_TIMEOUT; |
384 | u32 phy_addr = priv->address; | |
385 | ||
8ef583a0 | 386 | eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET); |
cafabe19 AV |
387 | |
388 | start = get_timer(0); | |
389 | while (get_timer(start) < timeout) { | |
8ef583a0 MF |
390 | eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); |
391 | if (!(ctrl & BMCR_RESET)) | |
5b1b1883 | 392 | break; |
5b1b1883 | 393 | |
cafabe19 AV |
394 | /* Try again after 10usec */ |
395 | udelay(10); | |
396 | }; | |
397 | ||
398 | if (get_timer(start) >= CONFIG_PHYRESET_TIMEOUT) | |
5b1b1883 VK |
399 | return -1; |
400 | ||
401 | #ifdef CONFIG_PHY_RESET_DELAY | |
402 | udelay(CONFIG_PHY_RESET_DELAY); | |
403 | #endif | |
404 | return 0; | |
405 | } | |
406 | ||
ef76025a SR |
407 | /* |
408 | * Add weak default function for board specific PHY configuration | |
409 | */ | |
410 | int __weak designware_board_phy_init(struct eth_device *dev, int phy_addr, | |
411 | int (*mii_write)(struct eth_device *, u8, u8, u16), | |
412 | int dw_reset_phy(struct eth_device *)) | |
413 | { | |
414 | return 0; | |
415 | } | |
416 | ||
5b1b1883 VK |
417 | static int configure_phy(struct eth_device *dev) |
418 | { | |
419 | struct dw_eth_dev *priv = dev->priv; | |
420 | int phy_addr; | |
ee7f5bfd | 421 | u16 bmcr; |
5b1b1883 VK |
422 | #if defined(CONFIG_DW_AUTONEG) |
423 | u16 bmsr; | |
424 | u32 timeout; | |
cafabe19 | 425 | ulong start; |
5b1b1883 VK |
426 | #endif |
427 | ||
428 | #if defined(CONFIG_DW_SEARCH_PHY) | |
429 | phy_addr = find_phy(dev); | |
024333c9 | 430 | if (phy_addr >= 0) |
5b1b1883 VK |
431 | priv->address = phy_addr; |
432 | else | |
433 | return -1; | |
f0ece9e9 MF |
434 | #else |
435 | phy_addr = priv->address; | |
5b1b1883 | 436 | #endif |
ef76025a SR |
437 | |
438 | /* | |
439 | * Some boards need board specific PHY initialization. This is | |
440 | * after the main driver init code but before the auto negotiation | |
441 | * is run. | |
442 | */ | |
443 | if (designware_board_phy_init(dev, phy_addr, | |
444 | eth_mdio_write, dw_reset_phy) < 0) | |
445 | return -1; | |
446 | ||
5b1b1883 VK |
447 | if (dw_reset_phy(dev) < 0) |
448 | return -1; | |
449 | ||
450 | #if defined(CONFIG_DW_AUTONEG) | |
20a5dde1 AV |
451 | /* Set Auto-Neg Advertisement capabilities to 10/100 half/full */ |
452 | eth_mdio_write(dev, phy_addr, MII_ADVERTISE, 0x1E1); | |
453 | ||
e25c90b4 | 454 | bmcr = BMCR_ANENABLE | BMCR_ANRESTART; |
5b1b1883 | 455 | #else |
8ef583a0 | 456 | bmcr = BMCR_SPEED100 | BMCR_FULLDPLX; |
5b1b1883 VK |
457 | |
458 | #if defined(CONFIG_DW_SPEED10M) | |
8ef583a0 | 459 | bmcr &= ~BMCR_SPEED100; |
5b1b1883 VK |
460 | #endif |
461 | #if defined(CONFIG_DW_DUPLEXHALF) | |
8ef583a0 | 462 | bmcr &= ~BMCR_FULLDPLX; |
5b1b1883 VK |
463 | #endif |
464 | #endif | |
8ef583a0 | 465 | if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0) |
5b1b1883 VK |
466 | return -1; |
467 | ||
468 | /* Read the phy status register and populate priv structure */ | |
469 | #if defined(CONFIG_DW_AUTONEG) | |
470 | timeout = CONFIG_AUTONEG_TIMEOUT; | |
cafabe19 | 471 | start = get_timer(0); |
ef76025a | 472 | puts("Waiting for PHY auto negotiation to complete"); |
cafabe19 | 473 | while (get_timer(start) < timeout) { |
8ef583a0 | 474 | eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr); |
ef76025a SR |
475 | if (bmsr & BMSR_ANEGCOMPLETE) { |
476 | priv->phy_configured = 1; | |
5b1b1883 | 477 | break; |
13edd170 | 478 | } |
5b1b1883 | 479 | |
ef76025a SR |
480 | /* Print dot all 1s to show progress */ |
481 | if ((get_timer(start) % 1000) == 0) | |
482 | putc('.'); | |
483 | ||
484 | /* Try again after 1msec */ | |
485 | udelay(1000); | |
486 | }; | |
5b1b1883 | 487 | |
ef76025a SR |
488 | if (!(bmsr & BMSR_ANEGCOMPLETE)) |
489 | puts(" TIMEOUT!\n"); | |
5b1b1883 | 490 | else |
ef76025a SR |
491 | puts(" done\n"); |
492 | #else | |
13edd170 | 493 | priv->phy_configured = 1; |
ef76025a SR |
494 | #endif |
495 | ||
496 | priv->speed = miiphy_speed(dev->name, phy_addr); | |
497 | priv->duplex = miiphy_duplex(dev->name, phy_addr); | |
13edd170 | 498 | |
5b1b1883 VK |
499 | return 0; |
500 | } | |
501 | ||
502 | #if defined(CONFIG_MII) | |
5700bb63 | 503 | static int dw_mii_read(const char *devname, u8 addr, u8 reg, u16 *val) |
5b1b1883 VK |
504 | { |
505 | struct eth_device *dev; | |
506 | ||
507 | dev = eth_get_dev_by_name(devname); | |
508 | if (dev) | |
509 | eth_mdio_read(dev, addr, reg, val); | |
510 | ||
511 | return 0; | |
512 | } | |
513 | ||
5700bb63 | 514 | static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val) |
5b1b1883 VK |
515 | { |
516 | struct eth_device *dev; | |
517 | ||
518 | dev = eth_get_dev_by_name(devname); | |
519 | if (dev) | |
520 | eth_mdio_write(dev, addr, reg, val); | |
521 | ||
522 | return 0; | |
523 | } | |
524 | #endif | |
525 | ||
9afc1af0 | 526 | int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface) |
5b1b1883 VK |
527 | { |
528 | struct eth_device *dev; | |
529 | struct dw_eth_dev *priv; | |
530 | ||
531 | dev = (struct eth_device *) malloc(sizeof(struct eth_device)); | |
532 | if (!dev) | |
533 | return -ENOMEM; | |
534 | ||
535 | /* | |
536 | * Since the priv structure contains the descriptors which need a strict | |
537 | * buswidth alignment, memalign is used to allocate memory | |
538 | */ | |
539 | priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev)); | |
540 | if (!priv) { | |
541 | free(dev); | |
542 | return -ENOMEM; | |
543 | } | |
544 | ||
545 | memset(dev, 0, sizeof(struct eth_device)); | |
546 | memset(priv, 0, sizeof(struct dw_eth_dev)); | |
547 | ||
548 | sprintf(dev->name, "mii%d", id); | |
549 | dev->iobase = (int)base_addr; | |
550 | dev->priv = priv; | |
551 | ||
7616e785 | 552 | eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]); |
5b1b1883 VK |
553 | |
554 | priv->dev = dev; | |
555 | priv->mac_regs_p = (struct eth_mac_regs *)base_addr; | |
556 | priv->dma_regs_p = (struct eth_dma_regs *)(base_addr + | |
557 | DW_DMA_BASE_OFFSET); | |
558 | priv->address = phy_addr; | |
13edd170 | 559 | priv->phy_configured = 0; |
9afc1af0 | 560 | priv->interface = interface; |
5b1b1883 | 561 | |
5b1b1883 VK |
562 | dev->init = dw_eth_init; |
563 | dev->send = dw_eth_send; | |
564 | dev->recv = dw_eth_recv; | |
565 | dev->halt = dw_eth_halt; | |
566 | dev->write_hwaddr = dw_write_hwaddr; | |
567 | ||
568 | eth_register(dev); | |
569 | ||
570 | #if defined(CONFIG_MII) | |
571 | miiphy_register(dev->name, dw_mii_read, dw_mii_write); | |
572 | #endif | |
573 | return 1; | |
574 | } |