[u-boot.git] / include / configs / bf537-pnav.h

/*
 * U-boot - Configuration file for BF537 PNAV board
 */

#ifndef __CONFIG_BF537_PNAV_H__
#define __CONFIG_BF537_PNAV_H__

#include <asm/config-pre.h>


/*
 * Processor Settings
 */
#define CONFIG_BFIN_CPU             bf537-0.2
#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_SPI_MASTER


/*
 * Clock Settings
 *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
 *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
 */
/* CONFIG_CLKIN_HZ is any value in Hz					*/
#define CONFIG_CLKIN_HZ			24576000
/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
/*                                                1 = CLKIN / 2		*/
#define CONFIG_CLKIN_HALF		0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
/*                                                1 = bypass PLL	*/
#define CONFIG_PLL_BYPASS		0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
/* Values can range from 0-63 (where 0 means 64)			*/
#define CONFIG_VCO_MULT			20
/* CCLK_DIV controls the core clock divider				*/
/* Values can be 1, 2, 4, or 8 ONLY					*/
#define CONFIG_CCLK_DIV			1
/* SCLK_DIV controls the system clock divider				*/
/* Values can range from 1-15						*/
#define CONFIG_SCLK_DIV			4


/*
 * Memory Settings
 */
#define CONFIG_MEM_ADD_WDTH	10
#define CONFIG_MEM_SIZE		64

#define CONFIG_EBIU_SDRRC_VAL	0x3b7
#define CONFIG_EBIU_SDGCTL_VAL	0x9111cd

#define CONFIG_EBIU_AMGCTL_VAL	0xFF
#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB033B0
#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0

#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)


/*
 * Network Settings
 */
#ifndef __ADSPBF534__
#define ADI_CMDS_NETWORK	1
#define CONFIG_BFIN_MAC
#define CONFIG_RMII
#define CONFIG_NET_MULTI	1
#endif
#define CONFIG_HOSTNAME		bf537-pnav
/* Uncomment next line to use fixed MAC address */
/* #define CONFIG_ETHADDR	02:80:ad:24:21:18 */


/*
 * Flash Settings
 */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE		0x20000000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	71


/*
 * SPI Settings
 */
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ	30000000
#define CONFIG_SF_DEFAULT_HZ	30000000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO


/*
 * Env Storage Settings
 */
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
#define ENV_IS_EMBEDDED_CUSTOM
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET	0x4000
#else
#define ENV_IS_EMBEDDED
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		0x20004000
#define CONFIG_ENV_OFFSET	0x4000
#endif
#define CONFIG_ENV_SIZE		0x1000
#define CONFIG_ENV_SECT_SIZE	0x2000


/*
 * NAND Settings
 */
#define CONFIG_NAND_PLAT

#define CONFIG_SYS_NAND_BASE		0x20100000
#define CONFIG_SYS_MAX_NAND_DEVICE	1

#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
#define BFIN_NAND_READY     PF12
#define BFIN_NAND_WRITE(addr, cmd) \
	do { \
		bfin_write8(addr, cmd); \
		SSYNC(); \
	} while (0)

#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
#define NAND_PLAT_DEV_READY(chip)      (bfin_read_PORTHIO() & BFIN_NAND_READY)
#define NAND_PLAT_INIT() \
	do { \
		bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~BFIN_NAND_READY); \
		bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() & ~BFIN_NAND_READY); \
		bfin_write_PORTHIO_INEN(bfin_read_PORTHIO_INEN() | BFIN_NAND_READY); \
	} while (0)


/*
 * I2C settings
 */
#define CONFIG_BFIN_TWI_I2C	1
#define CONFIG_HARD_I2C		1
#define CONFIG_SYS_I2C_SPEED		50000
#define CONFIG_SYS_I2C_SLAVE		0


/*
 * Misc Settings
 */
#define CONFIG_BAUDRATE		115200
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE	0

/* JFFS Partition offset set  */
#define CONFIG_SYS_JFFS2_FIRST_BANK	0
#define CONFIG_SYS_JFFS2_NUM_BANKS	1
/* 512k reserved for u-boot */
#define CONFIG_SYS_JFFS2_FIRST_SECTOR	15

#define CONFIG_BOOTCOMMAND	"run nandboot"
#define CONFIG_BOOTARGS_ROOT	"/dev/mtdblock1 rw rootfstype=yaffs"


/*
 * Pull in common ADI header for remaining command/environment setup
 */
#include <configs/bfin_adi_common.h>

#endif
Commit	Line	Data
cb4b5e87 MF	1	/*
	2	* U-boot - Configuration file for BF537 PNAV board
	3	*/
	4
	5	#ifndef __CONFIG_BF537_PNAV_H__
	6	#define __CONFIG_BF537_PNAV_H__
	7
f348ab85	8	#include <asm/config-pre.h>
cb4b5e87 MF	9
	10
	11	/*
	12	* Processor Settings
	13	*/
	14	#define CONFIG_BFIN_CPU bf537-0.2
	15	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
	16
	17
	18	/*
	19	* Clock Settings
	20	* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
	21	* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
	22	*/
	23	/* CONFIG_CLKIN_HZ is any value in Hz */
	24	#define CONFIG_CLKIN_HZ 24576000
	25	/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
	26	/* 1 = CLKIN / 2 */
	27	#define CONFIG_CLKIN_HALF 0
	28	/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
	29	/* 1 = bypass PLL */
	30	#define CONFIG_PLL_BYPASS 0
	31	/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
	32	/* Values can range from 0-63 (where 0 means 64) */
	33	#define CONFIG_VCO_MULT 20
	34	/* CCLK_DIV controls the core clock divider */
	35	/* Values can be 1, 2, 4, or 8 ONLY */
	36	#define CONFIG_CCLK_DIV 1
	37	/* SCLK_DIV controls the system clock divider */
	38	/* Values can range from 1-15 */
	39	#define CONFIG_SCLK_DIV 4
	40
	41
	42	/*
	43	* Memory Settings
	44	*/
	45	#define CONFIG_MEM_ADD_WDTH 10
	46	#define CONFIG_MEM_SIZE 64
	47
	48	#define CONFIG_EBIU_SDRRC_VAL 0x3b7
	49	#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
	50
	51	#define CONFIG_EBIU_AMGCTL_VAL 0xFF
	52	#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB033B0
	53	#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
	54
	55	#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
	56	#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
	57
	58
	59	/*
	60	* Network Settings
	61	*/
	62	#ifndef __ADSPBF534__
	63	#define ADI_CMDS_NETWORK 1
	64	#define CONFIG_BFIN_MAC
	65	#define CONFIG_RMII
	66	#define CONFIG_NET_MULTI 1
	67	#endif
	68	#define CONFIG_HOSTNAME bf537-pnav
	69	/* Uncomment next line to use fixed MAC address */
	70	/* #define CONFIG_ETHADDR 02:80:ad:24:21:18 */
	71
	72
73	/*
74	* Flash Settings
75	*/
76	#define CONFIG_FLASH_CFI_DRIVER
77	#define CONFIG_SYS_FLASH_BASE 0x20000000
78	#define CONFIG_SYS_FLASH_CFI
79	#define CONFIG_SYS_MAX_FLASH_BANKS 1
80	#define CONFIG_SYS_MAX_FLASH_SECT 71
81
82
83	/*
84	* SPI Settings
85	*/
86	#define CONFIG_BFIN_SPI
87	#define CONFIG_ENV_SPI_MAX_HZ 30000000
88	#define CONFIG_SF_DEFAULT_HZ 30000000
89	#define CONFIG_SPI_FLASH
90	#define CONFIG_SPI_FLASH_STMICRO
91
92
93	/*
94	* Env Storage Settings
95	*/
96	#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
97	#define ENV_IS_EMBEDDED_CUSTOM
98	#define CONFIG_ENV_IS_IN_SPI_FLASH
99	#define CONFIG_ENV_OFFSET 0x4000
100	#else
101	#define ENV_IS_EMBEDDED
102	#define CONFIG_ENV_IS_IN_FLASH 1
103	#define CONFIG_ENV_ADDR 0x20004000
104	#define CONFIG_ENV_OFFSET 0x4000
105	#endif
106	#define CONFIG_ENV_SIZE 0x1000
107	#define CONFIG_ENV_SECT_SIZE 0x2000
108
109
110	/*
111	* NAND Settings
112	*/
113	#define CONFIG_NAND_PLAT
114
115	#define CONFIG_SYS_NAND_BASE 0x20100000
116	#define CONFIG_SYS_MAX_NAND_DEVICE 1
117
118	#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W \| (1 << 2))
119	#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W \| (1 << 1))
120	#define BFIN_NAND_READY PF12
121	#define BFIN_NAND_WRITE(addr, cmd) \
122	do { \
123	bfin_write8(addr, cmd); \
124	SSYNC(); \
125	} while (0)
126
127	#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
128	#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
129	#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTHIO() & BFIN_NAND_READY)
130	#define NAND_PLAT_INIT() \
131	do { \
132	bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~BFIN_NAND_READY); \
133	bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() & ~BFIN_NAND_READY); \
134	bfin_write_PORTHIO_INEN(bfin_read_PORTHIO_INEN() \| BFIN_NAND_READY); \
135	} while (0)
136
137
138	/*
139	* I2C settings
140	*/
141	#define CONFIG_BFIN_TWI_I2C 1
142	#define CONFIG_HARD_I2C 1
143	#define CONFIG_SYS_I2C_SPEED 50000
144	#define CONFIG_SYS_I2C_SLAVE 0
145
146
147	/*
148	* Misc Settings
149	*/
150	#define CONFIG_BAUDRATE 115200
151	#define CONFIG_MISC_INIT_R
152	#define CONFIG_RTC_BFIN
153	#define CONFIG_UART_CONSOLE 0
154
155	/* JFFS Partition offset set */
156	#define CONFIG_SYS_JFFS2_FIRST_BANK 0
157	#define CONFIG_SYS_JFFS2_NUM_BANKS 1
158	/* 512k reserved for u-boot */
159	#define CONFIG_SYS_JFFS2_FIRST_SECTOR 15
160
161	#define CONFIG_BOOTCOMMAND "run nandboot"
162	#define CONFIG_BOOTARGS_ROOT "/dev/mtdblock1 rw rootfstype=yaffs"
163
164
165	/*
166	* Pull in common ADI header for remaining command/environment setup
167	*/
168	#include <configs/bfin_adi_common.h>
169
cb4b5e87	170	#endif